Benchmark #21929 - pibenchmarks.com

Brand: Linux Storage - backstore
Virtual
#544 / 1,679
16
#1,067 / 1,679
#15 / 94
#0 / 13
2,249

Overview
2020-04-30 15:44:03
#21,929
1,777
-472 (-26.56%)
Anonymous
hackneyed

Storage Details
Linux Storage - backstore
Virtual
5.8G
USB Flash
Linux
backstore-11579
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
42.9 MB/s
62.37 MB/s
67.14 MB/s
3,395 IOPS
6,739 IOPS
13,583 KB/s
26,956 KB/s
5,586 KB/s
4,666 KB/s
5,698 KB/s
4,080 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty rootfstype=ext4 fsck.repair=yes ip=::::pi4:eth0:dhcp rootwait elevator=deadline root=UUID=45e99191-771b-4e12-a526-0779148892cb ISCSI_INITIATOR=iqn.2020-04.dev.mathers:rpis:11579991.initiator ISCSI_TARGET_NAME=iqn.2020-04.dev.mathers:rpis:11579991 ISCSI_TARGET_IP=192.168.X.X ISCSI_TARGET_PORT=3260 rw Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 216.1 MiB (5.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 94x54 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 125.24 GiB used: 4.51 GiB (3.6%) ID-1: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Samsung drive model: MZNTE128HMGR-000 size: 119.24 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 0508 drive rev: EXT21K0Q temp: 44 C scheme: MBR SMART: yes state: enabled health: PASSED on: 163d 17h cycles: 2866 read: 11.42 TiB written: 7.42 TiB ID-2: /dev/sdb model: backstore-11579 size: 6.00 GiB block size: physical: 512 B logical: 512 B N/A rev: 4.0 scheme: MBR SMART: yes state: enabled Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 5.75 GiB size: 5.63 GiB (97.92%) used: 3.41 GiB (60.6%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: N/A size: 18.64 GiB used: 15.76 GiB (84.5%) fs: nfs remote: 192.168.X.X:/srv/tftpboot/11579991 label: N/A uuid: N/A ID-3: /mnt raw size: 20.00 GiB size: 19.56 GiB (97.81%) used: 1.10 GiB (5.6%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: rootfs uuid: 20f872f7-64f8-4b56-8272-db9698d75c93 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 264 KiB (0.3%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/dm-0 size: 256.0 MiB fs: fat (32 bit) label: boot uuid: 4BBD-D3E7 ID-2: /dev/dm-1 size: 1.47 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-3: /dev/sda2 size: 99.24 GiB fs: N/A label: N/A uuid: N/A ID-4: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Lenovo type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 17ef:602d Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.7% command: [kworker/2:4+events_freezable] pid: 73 mem: 0.00 MiB (0.0%) 2: cpu: 0.7% command: bash pid: 988 mem: 2.71 MiB (0.0%) 3: cpu: 0.5% command: sshd: pid: 714 mem: 4.53 MiB (0.1%) 4: cpu: 0.5% command: [loop0] pid: 812 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: [ksoftirqd/0] pid: 9 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 7.83 MiB (0.2%) command: init pid: 1 cpu: 0.2% 2: mem: 7.13 MiB (0.1%) command: systemd-journald pid: 229 cpu: 0.0% 3: mem: 6.52 MiB (0.1%) command: systemd pid: 697 cpu: 0.0% 4: mem: 6.00 MiB (0.1%) command: sshd: pid: 662 cpu: 0.0% 5: mem: 5.58 MiB (0.1%) command: systemd-logind pid: 363 cpu: 0.0% Info: Processes: 130 Uptime: 35m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty 
           rootfstype=ext4 fsck.repair=yes ip=::::pi4:eth0:dhcp rootwait elevator=deadline 
           root=UUID=45e99191-771b-4e12-a526-0779148892cb 
           ISCSI_INITIATOR=iqn.2020-04.dev.mathers:rpis:11579991.initiator 
           ISCSI_TARGET_NAME=iqn.2020-04.dev.mathers:rpis:11579991 ISCSI_TARGET_IP=192.168.X.X 
           ISCSI_TARGET_PORT=3260 rw 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 216.1 MiB (5.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 94x54 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 125.24 GiB used: 4.51 GiB (3.6%) 
           ID-1: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Samsung 
           drive model: MZNTE128HMGR-000 size: 119.24 GiB block size: physical: 4096 B 
           logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 0508 drive rev: EXT21K0Q temp: 44 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 163d 17h cycles: 2866 read: 11.42 TiB 
           written: 7.42 TiB 
           ID-2: /dev/sdb model: backstore-11579 size: 6.00 GiB block size: physical: 512 B 
           logical: 512 B N/A rev: 4.0 scheme: MBR 
           SMART: yes state: enabled 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 5.75 GiB size: 5.63 GiB (97.92%) used: 3.41 GiB (60.6%) fs: ext4 
           block size: 4096 B dev: /dev/sdb2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: N/A size: 18.64 GiB used: 15.76 GiB (84.5%) fs: nfs 
           remote: 192.168.X.X:/srv/tftpboot/11579991 label: N/A uuid: N/A 
           ID-3: /mnt raw size: 20.00 GiB size: 19.56 GiB (97.81%) used: 1.10 GiB (5.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: rootfs 
           uuid: 20f872f7-64f8-4b56-8272-db9698d75c93 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 264 KiB (0.3%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/dm-0 size: 256.0 MiB fs: fat (32 bit) label: boot uuid: 4BBD-D3E7 
           ID-2: /dev/dm-1 size: 1.47 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-3: /dev/sda2 size: 99.24 GiB fs: N/A label: N/A uuid: N/A 
           ID-4: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Lenovo type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 17ef:602d 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.7% command: [kworker/2:4+events_freezable] pid: 73 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.7% command: bash pid: 988 mem: 2.71 MiB (0.0%) 
           3: cpu: 0.5% command: sshd: pid: 714 mem: 4.53 MiB (0.1%) 
           4: cpu: 0.5% command: [loop0] pid: 812 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.4% command: [ksoftirqd/0] pid: 9 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.83 MiB (0.2%) command: init pid: 1 cpu: 0.2% 
           2: mem: 7.13 MiB (0.1%) command: systemd-journald pid: 229 cpu: 0.0% 
           3: mem: 6.52 MiB (0.1%) command: systemd pid: 697 cpu: 0.0% 
           4: mem: 6.00 MiB (0.1%) command: sshd: pid: 662 cpu: 0.0% 
           5: mem: 5.58 MiB (0.1%) command: systemd-logind pid: 363 cpu: 0.0% 
Info:      Processes: 130 Uptime: 35m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21929 - Brand: Linux Storage - backstore