Benchmark #22068 - pibenchmarks.com

Brand: Crucial BX500 Series
SSD (2.5" SATA)
#5 / 1,677
1,145
#620 / 1,677
#598 / 984
#145 / 370
6,340
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-01 04:57:07
#22,068
6,925
+585 (+8.45%)
Anonymous

Storage Details
Crucial BX500 Series
SSD (2.5" SATA)
120G
SSD
Crucial
CT120BX500SSD1
2.5 inch
SATA
3.00
5,000
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
181 MB/s
253.73 MB/s
254.96 MB/s
6,434 IOPS
5,390 IOPS
25,736 KB/s
21,563 KB/s
29,649 KB/s
24,840 KB/s
20,454 KB/s
28,504 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0578:u dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 694.5 MiB (17.5%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 129x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 141.60 GiB used: 7.44 GiB (5.3%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Crucial drive model: CT120BX500SSD1 size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0508 drive rev: M6CR013 temp: 45 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 14 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 55.77 GiB size: 54.90 GiB (98.44%) used: 7.19 GiB (13.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /var/log raw size: 500.0 MiB size: 468.3 MiB (93.66%) used: 206.5 MiB (44.1%) fs: ext4 block size: 4096 B dev: /dev/zram0 label: N/A uuid: N/A Swap: Kernel: swappiness: 80 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: zram size: 4.06 GiB used: 0 KiB (0.0%) priority: 75 dev: /dev/zram1 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.55 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B ID-3: /dev/sda3 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-4: /dev/sda5 size: 55.77 GiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Texas Instruments type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16a8 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/azlux.list 1: deb http: //packages.azlux.fr/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/grafana.list 1: deb https: //packages.grafana.com/oss/deb stable main Active apt repos in: /etc/apt/sources.list.d/homegear.list 1: deb https: //apt.homegear.eu/Raspbian/ buster/ Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main 2: deb-src https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 121% command: java pid: 536 mem: 263.7 MiB (6.6%) 2: cpu: 5.7% command: init pid: 1 mem: 8.22 MiB (0.2%) 3: cpu: 4.6% command: node pid: 1189 mem: 44.9 MiB (1.1%) 4: cpu: 3.0% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) 5: cpu: 3.0% command: homegear pid: 684 mem: 49.2 MiB (1.2%) Memory top: 5 1: mem: 263.7 MiB (6.6%) command: java pid: 536 cpu: 121% 2: mem: 95.5 MiB (2.4%) command: mysqld pid: 672 cpu: 1.6% 3: mem: 49.2 MiB (1.2%) command: homegear pid: 684 cpu: 3.0% 4: mem: 46.7 MiB (1.1%) command: frontail started by: node pid: 537 cpu: 2.3% 5: mem: 44.9 MiB (1.1%) command: node pid: 1189 cpu: 4.6% Info: Processes: 153 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0578:u dwc_otg.lpm_enable=0 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 694.5 MiB (17.5%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 129x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 141.60 GiB used: 7.44 GiB (5.3%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic drive vendor: Crucial 
           drive model: CT120BX500SSD1 size: 111.79 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.2 speed: 6.0 Gb/s rev: 0508 
           drive rev: M6CR013 temp: 45 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 14 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 55.77 GiB size: 54.90 GiB (98.44%) used: 7.19 GiB (13.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /var/log raw size: 500.0 MiB size: 468.3 MiB (93.66%) used: 206.5 MiB (44.1%) 
           fs: ext4 block size: 4096 B dev: /dev/zram0 label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 80 (default 60) cache pressure: 100 (default) 
           ID-1: swap-1 type: zram size: 4.06 GiB used: 0 KiB (0.0%) priority: 75 dev: /dev/zram1 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.55 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B 
           ID-3: /dev/sda3 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-4: /dev/sda5 size: 55.77 GiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Texas Instruments type: Abstract (modem),CDC-Data 
           driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16a8 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/azlux.list 
           1: deb http: //packages.azlux.fr/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/grafana.list 
           1: deb https: //packages.grafana.com/oss/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/homegear.list 
           1: deb https: //apt.homegear.eu/Raspbian/ buster/
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           2: deb-src https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 121% command: java pid: 536 mem: 263.7 MiB (6.6%) 
           2: cpu: 5.7% command: init pid: 1 mem: 8.22 MiB (0.2%) 
           3: cpu: 4.6% command: node pid: 1189 mem: 44.9 MiB (1.1%) 
           4: cpu: 3.0% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) 
           5: cpu: 3.0% command: homegear pid: 684 mem: 49.2 MiB (1.2%) 
           Memory top: 5 
           1: mem: 263.7 MiB (6.6%) command: java pid: 536 cpu: 121% 
           2: mem: 95.5 MiB (2.4%) command: mysqld pid: 672 cpu: 1.6% 
           3: mem: 49.2 MiB (1.2%) command: homegear pid: 684 cpu: 3.0% 
           4: mem: 46.7 MiB (1.1%) command: frontail started by: node pid: 537 cpu: 2.3% 
           5: mem: 44.9 MiB (1.1%) command: node pid: 1189 cpu: 4.6% 
Info:      Processes: 153 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #22068 - Brand: Crucial BX500 Series