Benchmark #22197 - pibenchmarks.com

Brand: Intenso PortableSSD Series
SSD (Portable)
#106 / 1,539
106
#772 / 1,539
#736 / 875
#116 / 137
4,633
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-01 15:18:07
#22,197
6,151
+1,518 (+24.68%)
Anonymous
Raspi_JMicron_120GB

Storage Details
Intenso PortableSSD Series
SSD (Portable)
128G
SSD
Intenso
PortableSSD
M.2
SATA
3.00
5,000
1d6b:0579
0x1d6b (Linux Foundation)
0x0579 (CX7220)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
193 MB/s
161.49 MB/s
170.43 MB/s
5,751 IOPS
4,252 IOPS
23,004 KB/s
17,009 KB/s
23,967 KB/s
24,442 KB/s
16,657 KB/s
22,800 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0579:u dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 544.7 MiB (13.7%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 229x73 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 134.08 GiB used: 2.91 GiB (2.2%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Intenso model: Portable SSD drive model: SSD SATAIII size: 119.24 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0506 drive rev: S0424A0 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 5 hrs cycles: 26 read: 261 KiB written: 596 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.98 GiB size: 117.17 GiB (98.47%) used: 2.86 GiB (2.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0579 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 30.3% command: java pid: 643 mem: 290.0 MiB (7.3%) 2: cpu: 2.6% command: init pid: 1 mem: 8.13 MiB (0.2%) 3: cpu: 2.3% command: pihole-ftl pid: 753 mem: 59.2 MiB (1.4%) 4: cpu: 1.0% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 5: cpu: 0.8% command: frontail started by: node pid: 646 mem: 45.1 MiB (1.1%) Memory top: 5 1: mem: 290.0 MiB (7.3%) command: java pid: 643 cpu: 30.3% 2: mem: 59.2 MiB (1.4%) command: pihole-ftl pid: 753 cpu: 2.3% 3: mem: 45.1 MiB (1.1%) command: frontail started by: node pid: 646 cpu: 0.8% 4: mem: 15.9 MiB (0.4%) command: smbd pid: 764 cpu: 0.1% 5: mem: 15.3 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 658 cpu: 0.1% Info: Processes: 150 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0579:u dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.88 GiB used: 544.7 MiB (13.7%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 229x73 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 134.08 GiB used: 2.91 GiB (2.2%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Intenso model: Portable SSD drive model: SSD SATAIII 
           size: 119.24 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rev: 0506 drive rev: S0424A0 temp: 40 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 5 hrs cycles: 26 read: 261 KiB 
           written: 596 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.98 GiB size: 117.17 GiB (98.47%) used: 2.86 GiB (2.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0579 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 30.3% command: java pid: 643 mem: 290.0 MiB (7.3%) 
           2: cpu: 2.6% command: init pid: 1 mem: 8.13 MiB (0.2%) 
           3: cpu: 2.3% command: pihole-ftl pid: 753 mem: 59.2 MiB (1.4%) 
           4: cpu: 1.0% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.8% command: frontail started by: node pid: 646 mem: 45.1 MiB (1.1%) 
           Memory top: 5 
           1: mem: 290.0 MiB (7.3%) command: java pid: 643 cpu: 30.3% 
           2: mem: 59.2 MiB (1.4%) command: pihole-ftl pid: 753 cpu: 2.3% 
           3: mem: 45.1 MiB (1.1%) command: frontail started by: node pid: 646 cpu: 0.8% 
           4: mem: 15.9 MiB (0.4%) command: smbd pid: 764 cpu: 0.1% 
           5: mem: 15.3 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 658 cpu: 0.1% 
Info:      Processes: 150 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #22197 - Brand: Intenso PortableSSD Series