Benchmark #22198 - pibenchmarks.com

Brand: Apple SM Series
SSD (M.2 SATA)
#424 / 1,679
26
#309 / 1,679
#300 / 984
#12 / 115
9,297
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-01 15:18:37
#22,198
6,949
-2,348 (-33.79%)
Anonymous

Storage Details
Apple SM Series
SSD (M.2 SATA)
500G
SSD
Apple
SSDSM512E
SATA
3.00
5,000
0bda:a3a0
0x0bda (Realtek Semiconductor Corp.)
0xa3a0
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
174 MB/s
288.11 MB/s
276.85 MB/s
8,400 IOPS
21,950 IOPS
33,601 KB/s
87,802 KB/s
28,622 KB/s
21,045 KB/s
14,306 KB/s
23,811 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 334.5 MiB (8.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 190x37 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 7.75 TiB used: 506.47 GiB (6.4%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Apple model: SSD SM512E size: 465.92 GiB block size: physical: 4096 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-3: /dev/sdb type: USB vendor: Western Digital model: WD Elements 25A3 drive model: WD80EMAZ-00WJTA0 size: 7.28 TiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: 5400 rpm rev: 1021 drive rev: 83.H0A83 temp: 41 C scheme: GPT SMART: yes state: enabled health: PASSED on: 62 hrs cycles: 118 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.92 GiB size: 457.61 GiB (98.22%) used: 2.11 GiB (0.5%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: ab8f7f1e-2efd-4459-a10e-a7548517e201 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /media/share raw size: 7.28 TiB size: 7.28 TiB (100.00%) used: 504.32 GiB (6.8%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: New Volume uuid: 6CB04B2BB04AFB5A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.1:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-1:2 info: Realtek ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 0bda:0411 Device-1: 2-1.3:3 info: Western Digital Elements Desktop (WDBWLG) type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:25a3 Device-2: 2-1.4:4 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1e91:a3a0 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 12.1% command: embyserver pid: 629 mem: 106.3 MiB (2.7%) 2: cpu: 3.9% command: init pid: 1 mem: 8.11 MiB (0.2%) 3: cpu: 0.9% command: pihole-ftl pid: 690 mem: 20.3 MiB (0.5%) 4: cpu: 0.7% command: smartd pid: 1268 mem: 3.18 MiB (0.0%) 5: cpu: 0.6% command: systemd-journald pid: 120 mem: 7.10 MiB (0.1%) Memory top: 5 1: mem: 106.3 MiB (2.7%) command: embyserver pid: 629 cpu: 12.1% 2: mem: 35.2 MiB (0.9%) command: sabnzbdplus started by: python2 pid: 713 cpu: 0.2% 3: mem: 20.3 MiB (0.5%) command: pihole-ftl pid: 690 cpu: 0.9% 4: mem: 16.1 MiB (0.4%) command: smbd pid: 679 cpu: 0.2% 5: mem: 14.1 MiB (0.3%) command: php-cgi pid: 675 cpu: 0.0% Info: Processes: 158 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda1 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 334.5 MiB (8.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 190x37 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 7.75 TiB used: 506.47 GiB (6.4%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Apple model: SSD SM512E size: 465.92 GiB block size: 
           physical: 4096 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD Elements 25A3 
           drive model: WD80EMAZ-00WJTA0 size: 7.28 TiB block size: physical: 4096 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: 5400 rpm rev: 1021 drive rev: 83.H0A83 temp: 41 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 62 hrs cycles: 118 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.92 GiB size: 457.61 GiB (98.22%) used: 2.11 GiB (0.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: ab8f7f1e-2efd-4459-a10e-a7548517e201 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /media/share raw size: 7.28 TiB size: 7.28 TiB (100.00%) used: 504.32 GiB (6.8%) 
           fs: ntfs block size: 4096 B dev: /dev/sdb1 label: New Volume uuid: 6CB04B2BB04AFB5A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.1:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 0bda:5411 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-1:2 info: Realtek ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 0bda:0411 
           Device-1: 2-1.3:3 info: Western Digital Elements Desktop (WDBWLG) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:25a3 
           Device-2: 2-1.4:4 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 1e91:a3a0 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 12.1% command: embyserver pid: 629 mem: 106.3 MiB (2.7%) 
           2: cpu: 3.9% command: init pid: 1 mem: 8.11 MiB (0.2%) 
           3: cpu: 0.9% command: pihole-ftl pid: 690 mem: 20.3 MiB (0.5%) 
           4: cpu: 0.7% command: smartd pid: 1268 mem: 3.18 MiB (0.0%) 
           5: cpu: 0.6% command: systemd-journald pid: 120 mem: 7.10 MiB (0.1%) 
           Memory top: 5 
           1: mem: 106.3 MiB (2.7%) command: embyserver pid: 629 cpu: 12.1% 
           2: mem: 35.2 MiB (0.9%) command: sabnzbdplus started by: python2 pid: 713 cpu: 0.2% 
           3: mem: 20.3 MiB (0.5%) command: pihole-ftl pid: 690 cpu: 0.9% 
           4: mem: 16.1 MiB (0.4%) command: smbd pid: 679 cpu: 0.2% 
           5: mem: 14.1 MiB (0.3%) command: php-cgi pid: 675 cpu: 0.0% 
Info:      Processes: 158 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #22198 - Brand: Apple SM Series