Benchmark #22383 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#49 / 1,672
303
#990 / 1,672
#910 / 983
#129 / 144
3,253
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-02 10:41:52
#22,383
4,474
+1,221 (+27.29%)
ssd
usb

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
128G
SSD
SanDisk
pSSD
1.8 inch
SATA
3.00
5,000
1d6b:5588
0x1d6b (Linux Foundation)
0x5588
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
183 MB/s
185.31 MB/s
140.03 MB/s
2,990 IOPS
3,061 IOPS
11,960 KB/s
12,246 KB/s
28,002 KB/s
24,767 KB/s
11,539 KB/s
11,900 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 218.8 MiB (5.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 168x56 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 178.73 GiB used: 1.38 GiB (0.8%) ID-1: /dev/mmcblk0 model: SB64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme Pro drive model: pSSD family: based SSDs size: 119.25 GiB block size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 6EB 1030 temp: 8 C scheme: MBR SMART: yes state: enabled health: FAILED! read: 0 KiB written: 0 KiB Pre-Fail: attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.00 GiB size: 117.13 GiB (98.44%) used: 1.33 GiB (1.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:6 info: Dresden Elektronik type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1cf1:0030 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5588 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.1% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 2: cpu: 1.4% command: systemd pid: 1 mem: 8.23 MiB (0.2%) 3: cpu: 0.7% command: bash pid: 5120 mem: 2.78 MiB (0.0%) 4: cpu: 0.3% command: sshd: pid: 5069 mem: 6.09 MiB (0.1%) 5: cpu: 0.3% command: sudo pid: 5111 mem: 3.15 MiB (0.0%) Memory top: 5 1: mem: 8.23 MiB (0.2%) command: systemd pid: 1 cpu: 1.4% 2: mem: 6.68 MiB (0.1%) command: systemd pid: 5075 cpu: 0.2% 3: mem: 6.59 MiB (0.1%) command: systemd-journald pid: 1861 cpu: 0.0% 4: mem: 6.09 MiB (0.1%) command: sshd: pid: 5069 cpu: 0.3% 5: mem: 5.60 MiB (0.1%) command: systemd-logind pid: 344 cpu: 0.0% Info: Processes: 144 Uptime: 11m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 218.8 MiB (5.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 168x56 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 178.73 GiB used: 1.38 GiB (0.8%) 
           ID-1: /dev/mmcblk0 model: SB64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme Pro drive model: pSSD 
           family: based SSDs size: 119.25 GiB block size: physical: 512 B logical: 512 B 
           sata: 3.0 speed: 6.0 Gb/s rev: 6EB 1030 
           temp: 8 C scheme: MBR 
           SMART: yes state: enabled health: FAILED! read: 0 KiB written: 0 KiB Pre-Fail: 
           attribute: Perc_Avail_Resrvd_Space threshold: 5 alert: FAILING_NOW 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.00 GiB size: 117.13 GiB (98.44%) used: 1.33 GiB (1.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:6 info: Dresden Elektronik type: Abstract (modem),CDC-Data 
           driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1cf1:0030 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: SanDisk type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 0781:5588 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.1% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.4% command: systemd pid: 1 mem: 8.23 MiB (0.2%) 
           3: cpu: 0.7% command: bash pid: 5120 mem: 2.78 MiB (0.0%) 
           4: cpu: 0.3% command: sshd: pid: 5069 mem: 6.09 MiB (0.1%) 
           5: cpu: 0.3% command: sudo pid: 5111 mem: 3.15 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.23 MiB (0.2%) command: systemd pid: 1 cpu: 1.4% 
           2: mem: 6.68 MiB (0.1%) command: systemd pid: 5075 cpu: 0.2% 
           3: mem: 6.59 MiB (0.1%) command: systemd-journald pid: 1861 cpu: 0.0% 
           4: mem: 6.09 MiB (0.1%) command: sshd: pid: 5069 cpu: 0.3% 
           5: mem: 5.60 MiB (0.1%) command: systemd-logind pid: 344 cpu: 0.0% 
Info:      Processes: 144 Uptime: 11m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #22383 - Brand: SanDisk Extreme Pro USB