Benchmark #22558 - pibenchmarks.com

Brand: Transcend SSD200 Series
SSD (2.5" SATA)
#271 / 1,677
56
#732 / 1,677
#707 / 984
#209 / 370
5,793
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-03 03:31:33
#22,558
4,878
-915 (-18.76%)
Anonymous

Storage Details
Transcend SSD200 Series
SSD (2.5" SATA)
128G
SSD
Transcend
TS128GSSD25S-M
2.5 inch
SATA
152d:1561
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x1561
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
70.3 MB/s
209.22 MB/s
186.97 MB/s
10,427 IOPS
8,328 IOPS
41,710 KB/s
33,314 KB/s
28,069 KB/s
16,485 KB/s
9,089 KB/s
19,766 KB/s

inxi Results
System: Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=013bb13b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 466.4 MiB (11.7%) gpu: 320.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 184x53 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.115-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 7.42 TiB used: 4.09 TiB (55.1%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Transcend drive model: TS128GSSD25S-M family: based SSDs size: 119.24 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 0204 drive rev: 130411 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 83 hrs cycles: 221 ID-3: /dev/sdb type: USB vendor: Seagate model: Backup+ Hub BK size: 7.28 TiB block size: physical: 4096 B logical: 512 B rev: D781 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.80 GiB (9.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 ID-3: /media/HDD-8TB raw size: 7.28 TiB size: 7.28 TiB (100.00%) used: 4.09 TiB (56.2%) fs: ntfs block size: 4096 B dev: /dev/sdb2 label: BX_Filme_und_Serien_Backup uuid: 8E12E27C12E268A3 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 ID-2: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-3: /dev/sdb1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Hub: 2-2:3 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 Device-2: 2-2.1:4 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 1: deb [arch=armhf] https: //repo.jellyfin.org/raspbian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 2.9% command: init pid: 1 mem: 7.81 MiB (0.2%) 2: cpu: 1.1% command: [kworker/2:1-events_freezable] pid: 33 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: sshd: pid: 1014 mem: 6.04 MiB (0.1%) 4: cpu: 0.7% command: systemd-journald pid: 116 mem: 6.86 MiB (0.1%) 5: cpu: 0.5% command: bash pid: 1047 mem: 2.77 MiB (0.0%) Memory top: 5 1: mem: 15.5 MiB (0.4%) command: smbd pid: 804 cpu: 0.2% 2: mem: 10.9 MiB (0.2%) command: rpimonitord started by: perl pid: 469 cpu: 0.4% 3: mem: 10.8 MiB (0.2%) command: rpimonitord started by: perl pid: 468 cpu: 0.0% 4: mem: 10.3 MiB (0.2%) command: rpimonitord started by: perl pid: 455 cpu: 0.0% 5: mem: 8.89 MiB (0.2%) command: nmbd pid: 543 cpu: 0.1% Info: Processes: 132 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 
           root=PARTUUID=013bb13b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 466.4 MiB (11.7%) gpu: 320.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 184x53 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.115-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 7.42 TiB used: 4.09 TiB (55.1%) 
           ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Transcend 
           drive model: TS128GSSD25S-M family: based SSDs size: 119.24 GiB block size: 
           physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 0204 drive rev: 130411 temp: 40 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 83 hrs cycles: 221 
           ID-3: /dev/sdb type: USB vendor: Seagate model: Backup+ Hub BK size: 7.28 TiB 
           block size: physical: 4096 B logical: 512 B rev: D781 scheme: GPT 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.80 GiB (9.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 
           ID-3: /media/HDD-8TB raw size: 7.28 TiB size: 7.28 TiB (100.00%) used: 4.09 TiB (56.2%) 
           fs: ntfs block size: 4096 B dev: /dev/sdb2 label: BX_Filme_und_Serien_Backup 
           uuid: 8E12E27C12E268A3 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
           ID-2: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-3: /dev/sdb1 size: 128.0 MiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 
           Hub: 2-2:3 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 
           Device-2: 2-2.1:4 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 
           1: deb [arch=armhf] https: //repo.jellyfin.org/raspbian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 2.9% command: init pid: 1 mem: 7.81 MiB (0.2%) 
           2: cpu: 1.1% command: [kworker/2:1-events_freezable] pid: 33 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.0% command: sshd: pid: 1014 mem: 6.04 MiB (0.1%) 
           4: cpu: 0.7% command: systemd-journald pid: 116 mem: 6.86 MiB (0.1%) 
           5: cpu: 0.5% command: bash pid: 1047 mem: 2.77 MiB (0.0%) 
           Memory top: 5 
           1: mem: 15.5 MiB (0.4%) command: smbd pid: 804 cpu: 0.2% 
           2: mem: 10.9 MiB (0.2%) command: rpimonitord started by: perl pid: 469 cpu: 0.4% 
           3: mem: 10.8 MiB (0.2%) command: rpimonitord started by: perl pid: 468 cpu: 0.0% 
           4: mem: 10.3 MiB (0.2%) command: rpimonitord started by: perl pid: 455 cpu: 0.0% 
           5: mem: 8.89 MiB (0.2%) command: nmbd pid: 543 cpu: 0.1% 
Info:      Processes: 132 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #22558 - Brand: Transcend SSD200 Series