Benchmark #22671 - pibenchmarks.com

Brand: Toshiba P300 3.5" HDD
HDD (3.5" SATA)
#775 / 1,539
4
#994 / 1,539
#34 / 66
#16 / 30
1,620
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-03 12:41:35
#22,671
746
-874 (-117.16%)
Anonymous

Storage Details
Toshiba P300 3.5" HDD
HDD (3.5" SATA)
2000G
HDD
Toshiba
HDWD120
SATA
2.00
480
2101:1576
0x2101 (ActionStar)
0x1576 (External Disk 3.0)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31 MB/s
27.42 MB/s
27.27 MB/s
264 IOPS
342 IOPS
1,056 KB/s
1,369 KB/s
13,373 KB/s
10,358 KB/s
1,306 KB/s
998 KB/s

inxi Results
System: Host: mediacenter Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=e64d289a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 494.1 MiB (49.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 287x82 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: 10.8.X.X/24 scope: global broadcast: 10.8.X.X IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X WAN IP: 90.105.X.X Drives: Local Storage: total: 1.85 TiB used: 1.06 TiB (57.5%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: USB External Disk 3.0 size: 1.82 TiB block size: physical: 512 B logical: 512 B rev: 0204 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.99 GiB (98.39%) used: 5.68 GiB (19.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /media/pi/Mediadisk raw size: 1.82 TiB size: 1.82 TiB (99.93%) used: 1.06 TiB (58.1%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 85af695c-0571-4892-a3b2-5cab8380342b Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 100.0 MiB (100.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: Arduino SA Uno R3 (CDC ACM) type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 2341:0043 Hub: 1-1.5:5 info: ActionStar ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 2101:8500 Device-3: 1-1.5.1:6 info: ActionStar type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 2101:8501 Device-4: 1-1.5.5:7 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:1576 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nordvpn.list 1: deb https://repo.nordvpn.com/deb/nordvpn/debian stable main Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https://downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.4% command: sickrage.py started by: python3 pid: 936 mem: 106.8 MiB (11.5%) 2: cpu: 2.6% command: mysgw pid: 382 mem: 0.70 MiB (0.0%) 3: cpu: 1.0% command: plex pid: 628 mem: 69.4 MiB (7.4%) 4: cpu: 0.9% command: [kworker/0:2h-mmc_complete] pid: 581 mem: 0.00 MiB (0.0%) 5: cpu: 0.6% command: bash pid: 31653 mem: 1.98 MiB (0.2%) Memory top: 5 1: mem: 106.8 MiB (11.5%) command: sickrage.py started by: python3 pid: 936 cpu: 4.4% 2: mem: 69.4 MiB (7.4%) command: plex pid: 628 cpu: 1.0% 3: mem: 30.9 MiB (3.3%) command: plex pid: 882 cpu: 0.2% 4: mem: 25.7 MiB (2.7%) command: domoticz pid: 3651 cpu: 0.4% 5: mem: 23.4 MiB (2.5%) command: pihole-ftl pid: 794 cpu: 0.1% Info: Processes: 151 Uptime: 5d 8h 45m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.00

inxi Results

System:    Host: mediacenter Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=e64d289a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes 
           rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
Memory:    RAM: total: 1002.1 MiB used: 494.1 MiB (49.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 4 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 287x82 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 
           chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4: 10.8.X.X/24 scope: global broadcast: 10.8.X.X 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           WAN IP: 90.105.X.X 
Drives:    Local Storage: total: 1.85 TiB used: 1.06 TiB (57.5%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: USB External Disk 3.0 size: 1.82 TiB block size: physical: 512 B logical: 512 B 
           rev: 0204 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.99 GiB (98.39%) used: 5.68 GiB (19.6%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /media/pi/Mediadisk raw size: 1.82 TiB size: 1.82 TiB (99.93%) used: 1.06 TiB (58.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 85af695c-0571-4892-a3b2-5cab8380342b 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 100.0 MiB (100.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 
           Device-2: 1-1.2:4 info: Arduino SA Uno R3 (CDC ACM) type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 
           rev: 1.1 speed: 12 Mb/s chip ID: 2341:0043 
           Hub: 1-1.5:5 info: ActionStar ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 2101:8500 
           Device-3: 1-1.5.1:6 info: ActionStar type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 2.0 
           speed: 480 Mb/s chip ID: 2101:8501 
           Device-4: 1-1.5.5:7 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 
           speed: 480 Mb/s chip ID: 152d:1576 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nordvpn.list 
           1: deb https://repo.nordvpn.com/deb/nordvpn/debian stable main
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https://downloads.plex.tv/repo/deb public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.4% command: sickrage.py started by: python3 pid: 936 mem: 106.8 MiB (11.5%) 
           2: cpu: 2.6% command: mysgw pid: 382 mem: 0.70 MiB (0.0%) 
           3: cpu: 1.0% command: plex pid: 628 mem: 69.4 MiB (7.4%) 
           4: cpu: 0.9% command: [kworker/0:2h-mmc_complete] pid: 581 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.6% command: bash pid: 31653 mem: 1.98 MiB (0.2%) 
           Memory top: 5 
           1: mem: 106.8 MiB (11.5%) command: sickrage.py started by: python3 pid: 936 cpu: 4.4% 
           2: mem: 69.4 MiB (7.4%) command: plex pid: 628 cpu: 1.0% 
           3: mem: 30.9 MiB (3.3%) command: plex pid: 882 cpu: 0.2% 
           4: mem: 25.7 MiB (2.7%) command: domoticz pid: 3651 cpu: 0.4% 
           5: mem: 23.4 MiB (2.5%) command: pihole-ftl pid: 794 cpu: 0.1% 
Info:      Processes: 151 Uptime: 5d 8h 45m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) inxi: 3.1.00

Benchmark #22671 - Brand: Toshiba P300 3.5" HDD