Benchmark #22704 - pibenchmarks.com

Brand: Samsung 850 EVO
SSD (2.5" SATA)
#23 / 1,679
607
#562 / 1,679
#541 / 984
#109 / 370
6,697
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-03 14:26:12
#22,704
5,381
-1,316 (-24.46%)
f38eb

Storage Details
Samsung 850 EVO
SSD (2.5" SATA)
500G
SSD
Samsung
SSD850EVO500GB
2.5 inch
SATA
3.00
5,000
1d6b:5136
0x1d6b (Linux Foundation)
0x5136 (ASM1053 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
161 MB/s
147.93 MB/s
148.28 MB/s
5,183 IOPS
3,760 IOPS
20,733 KB/s
15,042 KB/s
20,995 KB/s
19,399 KB/s
14,504 KB/s
20,801 KB/s

inxi Results
System: Host: RPi4a Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 326.3 MiB (8.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 147x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 172.22.X.X/26 type: dynamic noprefixroute scope: global broadcast: 172.22.X.X IP v6: fe80::a695:ed8c:a33:cf20/64 scope: link WAN IP: 109.133.X.X Drives: Local Storage: total: 1.39 TiB used: 698.46 GiB (48.9%) ID-1: /dev/mmcblk0 model: SD size: 29.88 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO 500GB family: based SSDs size: 465.76 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: EMT03B6Q temp: 34 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 9 written: 6.81 GiB ID-3: /dev/sdb type: USB vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 1.14 drive rev: RVQ01B6Q temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 11d 3h cycles: 31 written: 746.44 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 931.26 GiB size: 916.90 GiB (98.46%) used: 698.30 GiB (76.2%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /camimg raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 107.3 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: c2065bee-3ba7-4afc-a2c5-d6912781c31f Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 29.63 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: ATECH FLASH type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 11b0:6298 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:5136 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 18.6% command: syncthing pid: 454 mem: 79.7 MiB (2.0%) 2: cpu: 1.2% command: [usb-storage] pid: 82 mem: 0.00 MiB (0.0%) 3: cpu: 1.1% command: init pid: 1 mem: 7.55 MiB (0.1%) 4: cpu: 0.5% command: [usb-storage] pid: 77 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: bash pid: 599 mem: 2.80 MiB (0.0%) Memory top: 5 1: mem: 79.7 MiB (2.0%) command: syncthing pid: 454 cpu: 18.6% 2: mem: 11.2 MiB (0.2%) command: syncthing pid: 408 cpu: 0.0% 3: mem: 7.55 MiB (0.1%) command: init pid: 1 cpu: 1.1% 4: mem: 6.65 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.2% 5: mem: 6.41 MiB (0.1%) command: systemd pid: 535 cpu: 0.1% Info: Processes: 127 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh inxi: 3.1.00

inxi Results

System:    Host: RPi4a Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
Memory:    RAM: total: 3.89 GiB used: 326.3 MiB (8.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 147x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.22.X.X/26 type: dynamic noprefixroute scope: global broadcast: 172.22.X.X 
           IP v6: fe80::a695:ed8c:a33:cf20/64 scope: link 
           WAN IP: 109.133.X.X 
Drives:    Local Storage: total: 1.39 TiB used: 698.46 GiB (48.9%) 
           ID-1: /dev/mmcblk0 model: SD size: 29.88 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO 500GB family: based SSDs size: 465.76 GiB block size: 
           physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: EMT03B6Q temp: 34 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 9 written: 6.81 GiB 
           ID-3: /dev/sdb type: USB vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB block size: physical: 512 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 1.14 drive rev: RVQ01B6Q temp: 32 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 11d 3h cycles: 31 written: 746.44 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 931.26 GiB size: 916.90 GiB (98.46%) used: 698.30 GiB (76.2%) fs: ext4 block size: 4096 B 
           dev: /dev/sdb2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /camimg raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 107.3 MiB (0.0%) fs: ext4 block size: 4096 B 
           dev: /dev/sda1 label: N/A uuid: c2065bee-3ba7-4afc-a2c5-d6912781c31f 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.63 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: ATECH FLASH type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 11b0:6298 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 174c:5136 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 18.6% command: syncthing pid: 454 mem: 79.7 MiB (2.0%) 
           2: cpu: 1.2% command: [usb-storage] pid: 82 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.1% command: init pid: 1 mem: 7.55 MiB (0.1%) 
           4: cpu: 0.5% command: [usb-storage] pid: 77 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.5% command: bash pid: 599 mem: 2.80 MiB (0.0%) 
           Memory top: 5 
           1: mem: 79.7 MiB (2.0%) command: syncthing pid: 454 cpu: 18.6% 
           2: mem: 11.2 MiB (0.2%) command: syncthing pid: 408 cpu: 0.0% 
           3: mem: 7.55 MiB (0.1%) command: init pid: 1 cpu: 1.1% 
           4: mem: 6.65 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.2% 
           5: mem: 6.41 MiB (0.1%) command: systemd pid: 535 cpu: 0.1% 
Info:      Processes: 127 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh 
           inxi: 3.1.00

Benchmark #22704 - Brand: Samsung 850 EVO