Benchmark #22738 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#107 / 1,679
170
#678 / 1,679
#655 / 984
#25 / 69
6,097
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-03 17:35:37
#22,738
3,001
-3,096 (-103.17%)
PiServer-Benchmark
Transcend 256GB SATA III 6GB/S on Pi 4 using DeLock Konverter Raspberry Pi USB 2.0 > mSATA

Storage Details
Transcend MSA Series
SSD (mSATA)
256G
SSD
Transcend
TS256GMSA230S
SATA
2.10
480
2109:0229
0x2109
0x0229
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29.1 MB/s
31.96 MB/s
31.93 MB/s
4,675 IOPS
4,921 IOPS
18,703 KB/s
19,687 KB/s
13,966 KB/s
11,081 KB/s
11,716 KB/s
13,213 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f465198c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 590.3 MiB (14.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 3.90 TiB used: 1.14 TiB (29.3%) ID-1: /dev/mmcblk0 vendor: Silicon Motion model: SM32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Transcend model: TS256GMS A230S drive model: TS256GMSA230S size: 238.47 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 02J0 temp: 53 C scheme: MBR SMART: yes state: enabled health: PASSED on: 66d 6h cycles: 95 read: 724 KiB written: 1.5 MiB ID-3: /dev/sdb type: USB vendor: Western Digital model: WD40EFRX-68N32N0 size: 3.64 TiB block size: physical: 4096 B logical: 512 B rotation: 5400 rpm scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 34.46 GiB (14.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 7ecd902c-a870-4573-bbc4-542df60159ae ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 ID-3: /mnt/vol_1_4Tb raw size: 3.64 TiB size: 3.58 TiB (98.43%) used: 1.07 TiB (30.0%) fs: ext4 block size: 4096 B dev: /dev/sdb1 label: media uuid: e2fae8f8-8a1c-9174-d843-2dbc125b98cc ID-4: /var/lib/docker/overlay2/cdd27348377e6faac6b81a94c4f83f87f1d29ed5cdef0032ddccbc7b06ee6fde/merged raw size: N/A size: 233.48 GiB used: 34.46 GiB (14.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 8.00 GiB used: 326.8 MiB (4.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 5F31-5D83 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Hub: 1-1.2:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-2:2 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip ID: 05e3:0620 Device-2: 2-2.2:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:0835 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_13.x buster main 2: deb-src https: //deb.nodesource.com/node_13.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 6.0% command: plex pid: 1211 mem: 8.00 MiB (0.2%) 2: cpu: 1.2% command: x735pwr.sh started by: bash pid: 630 mem: 2.30 MiB (0.0%) 3: cpu: 1.2% command: x735pwr.sh started by: bash pid: 632 mem: 2.54 MiB (0.0%) 4: cpu: 0.4% command: ./plex pid: 1007 mem: 94.4 MiB (2.4%) 5: cpu: 0.3% command: packagekitd pid: 32148 mem: 13.1 MiB (0.3%) Memory top: 5 1: mem: 94.4 MiB (2.4%) command: ./plex pid: 1007 cpu: 0.4% 2: mem: 45.2 MiB (1.1%) command: mysqld pid: 733 cpu: 0.1% 3: mem: 42.6 MiB (1.0%) command: plex pid: 1045 cpu: 0.2% 4: mem: 24.3 MiB (0.6%) command: apache2 pid: 3899 cpu: 0.0% 5: mem: 24.1 MiB (0.6%) command: systemd-journald pid: 110 cpu: 0.0% Info: Processes: 168 Uptime: 56d 5h 34m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f465198c-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 590.3 MiB (14.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 3.90 TiB used: 1.14 TiB (29.3%) 
           ID-1: /dev/mmcblk0 vendor: Silicon Motion model: SM32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Transcend model: TS256GMS A230S 
           drive model: TS256GMSA230S size: 238.47 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.2 speed: 6.0 Gb/s rev: 02J0 temp: 53 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 66d 6h cycles: 95 read: 724 KiB 
           written: 1.5 MiB 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD40EFRX-68N32N0 size: 3.64 TiB 
           block size: physical: 4096 B logical: 512 B rotation: 5400 rpm scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 34.46 GiB (14.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 7ecd902c-a870-4573-bbc4-542df60159ae 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 
           ID-3: /mnt/vol_1_4Tb raw size: 3.64 TiB size: 3.58 TiB (98.43%) used: 1.07 TiB (30.0%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb1 label: media 
           uuid: e2fae8f8-8a1c-9174-d843-2dbc125b98cc 
           ID-4: /var/lib/docker/overlay2/cdd27348377e6faac6b81a94c4f83f87f1d29ed5cdef0032ddccbc7b06ee6fde/merged raw size: N/A size: 233.48 GiB used: 34.46 GiB (14.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 8.00 GiB used: 326.8 MiB (4.0%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 5F31-5D83 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage 
           driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Hub: 1-1.2:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-2:2 info: Genesys Logic ports: 4 rev: 3.2 speed: 5 Gb/s chip ID: 05e3:0620 
           Device-2: 2-2.2:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 174c:0835 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_13.x buster main
           2: deb-src https: //deb.nodesource.com/node_13.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 6.0% command: plex pid: 1211 mem: 8.00 MiB (0.2%) 
           2: cpu: 1.2% command: x735pwr.sh started by: bash pid: 630 mem: 2.30 MiB (0.0%) 
           3: cpu: 1.2% command: x735pwr.sh started by: bash pid: 632 mem: 2.54 MiB (0.0%) 
           4: cpu: 0.4% command: ./plex pid: 1007 mem: 94.4 MiB (2.4%) 
           5: cpu: 0.3% command: packagekitd pid: 32148 mem: 13.1 MiB (0.3%) 
           Memory top: 5 
           1: mem: 94.4 MiB (2.4%) command: ./plex pid: 1007 cpu: 0.4% 
           2: mem: 45.2 MiB (1.1%) command: mysqld pid: 733 cpu: 0.1% 
           3: mem: 42.6 MiB (1.0%) command: plex pid: 1045 cpu: 0.2% 
           4: mem: 24.3 MiB (0.6%) command: apache2 pid: 3899 cpu: 0.0% 
           5: mem: 24.1 MiB (0.6%) command: systemd-journald pid: 110 cpu: 0.0% 
Info:      Processes: 168 Uptime: 56d 5h 34m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.00

Benchmark #22738 - Brand: Transcend MSA Series