Benchmark #22740 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#107 / 1,679
170
#679 / 1,679
#656 / 984
#25 / 69
6,097
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-03 17:45:47
#22,740
2,934
-3,163 (-107.81%)
Anonymous

Storage Details
Transcend MSA Series
SSD (mSATA)
32G
SSD
Transcend
TS32GMSA370
SATA
2.10
480
2109:0229
0x2109
0x0229
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29.5 MB/s
31.89 MB/s
31.9 MB/s
4,239 IOPS
4,974 IOPS
16,957 KB/s
19,897 KB/s
13,716 KB/s
10,264 KB/s
10,625 KB/s
13,498 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=297fd064-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 755.6 MiB (19.0%) gpu: 252.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 37.04 GiB used: 6.92 GiB (18.7%) ID-1: /dev/mmcblk0 model: SE08G size: 7.22 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Transcend model: TS32GMSA 370 drive model: TS32GMSA370 family: based SSDs size: 29.82 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: P122 temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 8d 11h cycles: 125 read: 165.22 GiB written: 544.50 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.56 GiB size: 28.98 GiB (98.01%) used: 6.87 GiB (23.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.7 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9F2D-0578 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 9F2D-0578 ID-2: /dev/mmcblk0p2 size: 6.96 GiB fs: ext4 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.0% command: ps pid: 15506 mem: 2.14 MiB (0.0%) 2: cpu: 0.4% command: smartd pid: 14675 mem: 3.19 MiB (0.0%) 3: cpu: 0.3% command: bash pid: 14239 mem: 2.78 MiB (0.0%) 4: cpu: 0.3% command: packagekitd pid: 14387 mem: 13.0 MiB (0.3%) 5: cpu: 0.2% command: sshd: pid: 14143 mem: 6.17 MiB (0.1%) Memory top: 5 1: mem: 182.0 MiB (4.8%) command: mysqld pid: 668 cpu: 0.1% 2: mem: 42.4 MiB (1.1%) command: systemd-journald pid: 121 cpu: 0.0% 3: mem: 35.1 MiB (0.9%) command: pihole-ftl pid: 863 cpu: 0.0% 4: mem: 23.7 MiB (0.6%) command: apache2 pid: 676 cpu: 0.0% 5: mem: 17.0 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 535 cpu: 0.0% Info: Processes: 151 Uptime: 48d 14h 19m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=297fd064-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 755.6 MiB (19.0%) gpu: 252.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 37.04 GiB used: 6.92 GiB (18.7%) 
           ID-1: /dev/mmcblk0 model: SE08G size: 7.22 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Transcend model: TS32GMSA 370 drive model: TS32GMSA370 
           family: based SSDs size: 29.82 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rev: P122 temp: 32 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 8d 11h cycles: 125 read: 165.22 GiB 
           written: 544.50 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.56 GiB size: 28.98 GiB (98.01%) used: 6.87 GiB (23.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.7 MiB (20.9%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9F2D-0578 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 9F2D-0578 
           ID-2: /dev/mmcblk0p2 size: 6.96 GiB fs: ext4 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage 
           driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.0% command: ps pid: 15506 mem: 2.14 MiB (0.0%) 
           2: cpu: 0.4% command: smartd pid: 14675 mem: 3.19 MiB (0.0%) 
           3: cpu: 0.3% command: bash pid: 14239 mem: 2.78 MiB (0.0%) 
           4: cpu: 0.3% command: packagekitd pid: 14387 mem: 13.0 MiB (0.3%) 
           5: cpu: 0.2% command: sshd: pid: 14143 mem: 6.17 MiB (0.1%) 
           Memory top: 5 
           1: mem: 182.0 MiB (4.8%) command: mysqld pid: 668 cpu: 0.1% 
           2: mem: 42.4 MiB (1.1%) command: systemd-journald pid: 121 cpu: 0.0% 
           3: mem: 35.1 MiB (0.9%) command: pihole-ftl pid: 863 cpu: 0.0% 
           4: mem: 23.7 MiB (0.6%) command: apache2 pid: 676 cpu: 0.0% 
           5: mem: 17.0 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 535 cpu: 0.0% 
Info:      Processes: 151 Uptime: 48d 14h 19m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.00

Benchmark #22740 - Brand: Transcend MSA Series