Benchmark #22830 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
#18 / 1,665
617
#1,262 / 1,665
#159 / 389
1,252
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-04 04:12:04
#22,830
1,383
+131 (+9.47%)
dasza77
some hd salvaged from a laptop, ut inside an USB3.0 case and connected to RPi4

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
59.2G
SD
SanDisk
SC64G
SDXC
5.00
0x03
SD
8.0
08/2019
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
25.1 MB/s
40.74 MB/s
33 MB/s
984 IOPS
3,219 IOPS
3,939 KB/s
12,876 KB/s
10,754 KB/s
3,926 KB/s
10,020 KB/s
3,527 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 216.9 MiB (5.5%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 141x41 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 990.99 GiB used: 37.61 GiB (3.8%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: External USB3.0 drive model: ST1000LM035-1RK172 size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5400 rpm rev: 0204 drive rev: LCM2 temp: 35 C scheme: MBR SMART: yes state: enabled health: PASSED on: 126d 4h cycles: 191 Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 2.70 GiB (4.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 55.2 MiB (21.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /mnt/usb1 raw size: 59.22 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ext4 dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-4: /mnt/usb2 raw size: 931.51 GiB size: 931.51 GiB (100.00%) used: 34.86 GiB (3.7%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: 950GB uuid: 92726C28726C12F1 Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 13.6% command: sda1 started by: mount.ntfs pid: 3448 mem: 3.28 MiB (0.0%) 2: cpu: 13.1% command: node pid: 4454 mem: 82.8 MiB (2.0%) 3: cpu: 0.3% command: bash pid: 5937 mem: 2.78 MiB (0.0%) 4: cpu: 0.1% command: [kworker/0:1h-kblockd] pid: 69 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/u8:2-events_unbound] pid: 4101 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 82.8 MiB (2.0%) command: node pid: 4454 cpu: 13.1% 2: mem: 15.5 MiB (0.3%) command: smbd pid: 4420 cpu: 0.0% 3: mem: 14.7 MiB (0.3%) command: supervisord started by: python2 pid: 4437 cpu: 0.0% 4: mem: 8.69 MiB (0.2%) command: nmbd pid: 4409 cpu: 0.0% 5: mem: 7.81 MiB (0.1%) command: init pid: 1 cpu: 0.0% Info: Processes: 104 Uptime: 1h 51m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.88 GiB used: 216.9 MiB (5.5%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 141x41 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 990.99 GiB used: 37.61 GiB (3.8%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: External USB3.0 drive model: ST1000LM035-1RK172 
           size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rotation: 5400 rpm rev: 0204 drive rev: LCM2 
           temp: 35 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 126d 4h cycles: 191 Pre-Fail: 
           attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 2.70 GiB (4.6%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 55.2 MiB (21.9%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /mnt/usb1 raw size: 59.22 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ext4 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-4: /mnt/usb2 raw size: 931.51 GiB size: 931.51 GiB (100.00%) used: 34.86 GiB (3.7%) 
           fs: ntfs block size: 4096 B dev: /dev/sda1 label: 950GB uuid: 92726C28726C12F1 
Swap:      Alert: No Swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 13.6% command: sda1 started by: mount.ntfs pid: 3448 mem: 3.28 MiB (0.0%) 
           2: cpu: 13.1% command: node pid: 4454 mem: 82.8 MiB (2.0%) 
           3: cpu: 0.3% command: bash pid: 5937 mem: 2.78 MiB (0.0%) 
           4: cpu: 0.1% command: [kworker/0:1h-kblockd] pid: 69 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: [kworker/u8:2-events_unbound] pid: 4101 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 82.8 MiB (2.0%) command: node pid: 4454 cpu: 13.1% 
           2: mem: 15.5 MiB (0.3%) command: smbd pid: 4420 cpu: 0.0% 
           3: mem: 14.7 MiB (0.3%) command: supervisord started by: python2 pid: 4437 cpu: 0.0% 
           4: mem: 8.69 MiB (0.2%) command: nmbd pid: 4409 cpu: 0.0% 
           5: mem: 7.81 MiB (0.1%) command: init pid: 1 cpu: 0.0% 
Info:      Processes: 104 Uptime: 1h 51m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #22830 - Brand: SanDisk SD Ultra A1 (SC64G)