Benchmark #22963 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
#16 / 1,701
803
#1,184 / 1,701
#86 / 405
1,576
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-04 14:07:02
#22,963
1,271
-305 (-24.00%)
Cyril
Sandisk extreme

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
59.2G
SD
SanDisk
SN64G
SDXC
6.00
0x03
SD
8.0
12/2019
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
35.1 MB/s
41.13 MB/s
37.59 MB/s
974 IOPS
2,952 IOPS
3,899 KB/s
11,809 KB/s
8,802 KB/s
2,143 KB/s
6,828 KB/s
3,149 KB/s

inxi Results
System: Kernel: 5.4.35-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Memory: RAM: total: 3.81 GiB used: 157.1 MiB (4.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.35-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 59.48 GiB used: 1.86 GiB (3.1%) ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 1.81 GiB (3.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.7 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.3% command: init pid: 1 mem: 8.03 MiB (0.2%) 2: cpu: 0.4% command: [kworker/0:1h-mmc_complete] pid: 87 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: systemd-journald pid: 127 mem: 6.71 MiB (0.1%) 4: cpu: 0.3% command: systemd-udevd pid: 154 mem: 3.98 MiB (0.1%) 5: cpu: 0.2% command: systemd-timesyncd pid: 299 mem: 2.79 MiB (0.0%) Memory top: 5 1: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 3.3% 2: mem: 6.71 MiB (0.1%) command: systemd-journald pid: 127 cpu: 0.4% 3: mem: 6.54 MiB (0.1%) command: systemd pid: 572 cpu: 0.1% 4: mem: 6.17 MiB (0.1%) command: sshd: pid: 565 cpu: 0.1% 5: mem: 5.65 MiB (0.1%) command: systemd-logind pid: 339 cpu: 0.1% Info: Processes: 139 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 5.4.35-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 
           Memory:    RAM: total: 3.81 GiB used: 157.1 MiB (4.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.35-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 59.48 GiB used: 1.86 GiB (3.1%) 
           ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 1.81 GiB (3.1%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.7 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.3% command: init pid: 1 mem: 8.03 MiB (0.2%) 
           2: cpu: 0.4% command: [kworker/0:1h-mmc_complete] pid: 87 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.4% command: systemd-journald pid: 127 mem: 6.71 MiB (0.1%) 
           4: cpu: 0.3% command: systemd-udevd pid: 154 mem: 3.98 MiB (0.1%) 
           5: cpu: 0.2% command: systemd-timesyncd pid: 299 mem: 2.79 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 3.3% 
           2: mem: 6.71 MiB (0.1%) command: systemd-journald pid: 127 cpu: 0.4% 
           3: mem: 6.54 MiB (0.1%) command: systemd pid: 572 cpu: 0.1% 
           4: mem: 6.17 MiB (0.1%) command: sshd: pid: 565 cpu: 0.1% 
           5: mem: 5.65 MiB (0.1%) command: systemd-logind pid: 339 cpu: 0.1% 
Info:      Processes: 139 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #22963 - Brand: SanDisk SD Extreme A2 (SN64G)