Benchmark #23096 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL16G)
C10
#58 / 1,701
334
#1,505 / 1,701
#63 / 405
796
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-05 03:23:20
#23,096
965
+169 (+17.51%)
Anonymous
Samsung 16 GB XRC

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL16G)
C10
14.6G
SD
SanDisk
SL16G
SDHC
3.00
0x03
SD
8.0
02/2020
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
10.9 MB/s
39.59 MB/s
32.91 MB/s
715 IOPS
2,558 IOPS
2,862 KB/s
10,232 KB/s
9,017 KB/s
3,376 KB/s
6,930 KB/s
2,878 KB/s

inxi Results
System: Kernel: 4.19.114-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=eb5010d2-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait logo.nologo Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 439.4 MiB (21.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 92x34 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.114-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 253.31 GiB used: 4.10 GiB (1.6%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: A-Data drive model: SU800 size: 238.47 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 0204 drive rev: P0801A temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 35d 7h cycles: 23632 read: 175.2 MiB written: 133.8 MiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.58 GiB size: 14.33 GiB (98.28%) used: 4.04 GiB (28.2%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 638417fb-7220-47b1-883c-e6fee02f51ac ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (21.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: B6BB-0F0E Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 size: 237.15 GiB fs: exfat label: PIOffice uuid: 024D-AC17 ID-2: /dev/sda2 size: 450.0 MiB fs: ntfs label: N/A uuid: 904AD27D4AD26010 ID-3: /dev/sda3 size: 902.1 MiB fs: ntfs label: N/A uuid: 549683F79683D83E USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 1.6% command: init pid: 1 mem: 8.12 MiB (0.4%) 2: cpu: 0.7% command: cockpit-ws pid: 3548 mem: 9.84 MiB (0.5%) 3: cpu: 0.6% command: glances started by: python3 pid: 784 mem: 19.9 MiB (1.0%) 4: cpu: 0.6% command: cockpit-bridge pid: 5765 mem: 7.99 MiB (0.4%) 5: cpu: 0.6% command: cockpit-bridge pid: 5791 mem: 10.2 MiB (0.5%) Memory top: 5 1: mem: 61.1 MiB (3.1%) command: mysqld pid: 883 cpu: 0.1% 2: mem: 42.9 MiB (2.2%) command: apache2 pid: 928 cpu: 0.0% 3: mem: 41.5 MiB (2.1%) command: apache2 pid: 931 cpu: 0.0% 4: mem: 41.4 MiB (2.1%) command: apache2 pid: 911 cpu: 0.0% 5: mem: 40.5 MiB (2.0%) command: apache2 pid: 2579 cpu: 0.0% Info: Processes: 200 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.114-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=eb5010d2-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           logo.nologo 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 439.4 MiB (21.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 92x34 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.114-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 253.31 GiB used: 4.10 GiB (1.6%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: A-Data 
           drive model: SU800 size: 238.47 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rev: 0204 
           drive rev: P0801A temp: 32 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 35d 7h cycles: 23632 read: 175.2 MiB 
           written: 133.8 MiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.58 GiB size: 14.33 GiB (98.28%) used: 4.04 GiB (28.2%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 638417fb-7220-47b1-883c-e6fee02f51ac 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (21.0%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: B6BB-0F0E 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sda1 size: 237.15 GiB fs: exfat label: PIOffice uuid: 024D-AC17 
           ID-2: /dev/sda2 size: 450.0 MiB fs: ntfs label: N/A uuid: 904AD27D4AD26010 
           ID-3: /dev/sda3 size: 902.1 MiB fs: ntfs label: N/A uuid: 549683F79683D83E 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 
           Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 1.6% command: init pid: 1 mem: 8.12 MiB (0.4%) 
           2: cpu: 0.7% command: cockpit-ws pid: 3548 mem: 9.84 MiB (0.5%) 
           3: cpu: 0.6% command: glances started by: python3 pid: 784 mem: 19.9 MiB (1.0%) 
           4: cpu: 0.6% command: cockpit-bridge pid: 5765 mem: 7.99 MiB (0.4%) 
           5: cpu: 0.6% command: cockpit-bridge pid: 5791 mem: 10.2 MiB (0.5%) 
           Memory top: 5 
           1: mem: 61.1 MiB (3.1%) command: mysqld pid: 883 cpu: 0.1% 
           2: mem: 42.9 MiB (2.2%) command: apache2 pid: 928 cpu: 0.0% 
           3: mem: 41.5 MiB (2.1%) command: apache2 pid: 931 cpu: 0.0% 
           4: mem: 41.4 MiB (2.1%) command: apache2 pid: 911 cpu: 0.0% 
           5: mem: 40.5 MiB (2.0%) command: apache2 pid: 2579 cpu: 0.0% 
Info:      Processes: 200 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23096 - Brand: SanDisk SD Ultra (SL16G)