Benchmark #23100 - pibenchmarks.com

Brand: Samsung SD EVO (00000)
C10 U1
#27 / 1,701
579
#1,421 / 1,701
#267 / 405
1,043
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-05 03:39:37
#23,100
313
-730 (-233.23%)
Anonymous

Secure Digital (SD) Card Details
Samsung SD EVO (00000)
C10 U1
14.9G
SD
Samsung
00000
SDHC
3.00
0x1b
SM
1.0
12/2015
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
250 (-150)
450
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
2.1 MB/s
9.01 MB/s
5.69 MB/s
66 IOPS
763 IOPS
266 KB/s
3,054 KB/s
5,417 KB/s
478 KB/s
4,022 KB/s
358 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 672.1 MiB (67.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 149x51 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 14.92 GiB used: 12.14 GiB (81.4%) ID-1: /dev/mmcblk0 model: 00000 size: 14.92 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.88 GiB size: 14.63 GiB (98.31%) used: 12.12 GiB (82.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: f2100b2f-ed84-4647-b5ae-089280112716 ID-2: /boot raw size: 39.2 MiB size: 38.6 MiB (98.42%) used: 22.3 MiB (57.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 70CE-EB76 ID-3: /media/repository raw size: N/A size: 3.58 TiB used: 2.38 TiB (66.7%) fs: cifs remote: //192.168.X.X/repository label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 256.0 MiB used: 256.0 MiB (100.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Hub: 1-1.3:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Device-2: 1-1.3.1:5 info: QinHeng HL-340 USB-Serial adapter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 Device-3: 1-1.3.2:13 info: U-Blox AG [u-blox 6] type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1546:01a6 Device-4: 1-1.3.3:7 info: Dell UPS Tower 500W LV type: HID driver: usbfs interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 047c:ffff Device-5: 1-1.3.4:8 info: Dell UPS Tower 500W LV type: HID driver: usbfs interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 047c:ffff Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi 2: deb http: //ftp.debian.org/debian stretch-backports main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Active apt repos in: /etc/apt/sources.list.d/yarn.list 1: deb https: //dl.yarnpkg.com/debian/ stable main Processes: CPU top: 5 1: cpu: 22.3% command: python3 pid: 9490 mem: 48.8 MiB (5.2%) 2: cpu: 17.5% command: python3 pid: 8304 mem: 48.5 MiB (5.2%) 3: cpu: 8.5% command: python3 pid: 11024 mem: 15.2 MiB (1.6%) 4: cpu: 4.8% command: omada pid: 2763 mem: 137.0 MiB (14.7%) 5: cpu: 3.0% command: postgres: pid: 9905 mem: 12.5 MiB (1.3%) Memory top: 5 1: mem: 151.7 MiB (16.3%) command: java pid: 626 cpu: 2.2% 2: mem: 137.0 MiB (14.7%) command: omada pid: 2763 cpu: 4.8% 3: mem: 135.7 MiB (14.6%) command: postgres: pid: 11011 cpu: 0.0% 4: mem: 48.8 MiB (5.2%) command: python3 pid: 9490 cpu: 22.3% 5: mem: 48.5 MiB (5.2%) command: python3 pid: 8304 cpu: 17.5% Info: Processes: 172 Uptime: 10d 1h 39m Init: systemd v: 232 Compilers: gcc: 6.3.0 alt: 4.9/6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.1 MiB used: 672.1 MiB (67.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 149x51 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 14.92 GiB used: 12.14 GiB (81.4%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 14.92 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.88 GiB size: 14.63 GiB (98.31%) used: 12.12 GiB (82.9%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: N/A 
           uuid: f2100b2f-ed84-4647-b5ae-089280112716 
           ID-2: /boot raw size: 39.2 MiB size: 38.6 MiB (98.42%) used: 22.3 MiB (57.9%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 70CE-EB76 
           ID-3: /media/repository raw size: N/A size: 3.58 TiB used: 2.38 TiB (66.7%) fs: cifs 
           remote: //192.168.X.X/repository label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 256.0 MiB used: 256.0 MiB (100.0%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Hub: 1-1.3:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Device-2: 1-1.3.1:5 info: QinHeng HL-340 USB-Serial adapter type:  
           driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 
           Device-3: 1-1.3.2:13 info: U-Blox AG [u-blox 6] type: Abstract (modem),CDC-Data 
           driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1546:01a6 
           Device-4: 1-1.3.3:7 info: Dell UPS Tower 500W LV type: HID driver: usbfs interfaces: 1 
           rev: 1.1 speed: 1.5 Mb/s chip ID: 047c:ffff Device-5: 1-1.3.4:8 info: Dell UPS Tower 500W LV type: HID driver: usbfs interfaces: 1 
           rev: 1.1 speed: 1.5 Mb/s chip ID: 047c:ffff Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           2: deb http: //ftp.debian.org/debian stretch-backports main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
           Active apt repos in: /etc/apt/sources.list.d/yarn.list 
           1: deb https: //dl.yarnpkg.com/debian/ stable main
Processes: CPU top: 5 
           1: cpu: 22.3% command: python3 pid: 9490 mem: 48.8 MiB (5.2%) 
           2: cpu: 17.5% command: python3 pid: 8304 mem: 48.5 MiB (5.2%) 
           3: cpu: 8.5% command: python3 pid: 11024 mem: 15.2 MiB (1.6%) 
           4: cpu: 4.8% command: omada pid: 2763 mem: 137.0 MiB (14.7%) 
           5: cpu: 3.0% command: postgres: pid: 9905 mem: 12.5 MiB (1.3%) 
           Memory top: 5 
           1: mem: 151.7 MiB (16.3%) command: java pid: 626 cpu: 2.2% 
           2: mem: 137.0 MiB (14.7%) command: omada pid: 2763 cpu: 4.8% 
           3: mem: 135.7 MiB (14.6%) command: postgres: pid: 11011 cpu: 0.0% 
           4: mem: 48.8 MiB (5.2%) command: python3 pid: 9490 cpu: 22.3% 
           5: mem: 48.5 MiB (5.2%) command: python3 pid: 8304 cpu: 17.5% 
Info:      Processes: 172 Uptime: 10d 1h 39m Init: systemd v: 232 Compilers: gcc: 6.3.0 alt: 4.9/6 
           Client: shell wrapper v: 4.4.12-release inxi: 3.1.00

Benchmark #23100 - Brand: Samsung SD EVO (00000)