Benchmark #23127 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
#15 / 1,539
577
#1,137 / 1,539
#140 / 369
1,239
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-05 06:28:13
#23,127
1,265
+26 (+2.06%)
dasza77

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC64G)
A1 C10 U1
59.2G
SD
SanDisk
SC64G
SDXC
5.00
0x03
SD
8.0
08/2019
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
25.2 MB/s
39.45 MB/s
32.85 MB/s
927 IOPS
3,109 IOPS
3,709 KB/s
12,436 KB/s
9,383 KB/s
3,404 KB/s
8,439 KB/s
3,273 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 129.1 MiB (3.3%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 141x41 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 1.42 TiB used: 2.75 GiB (0.2%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: External USB3.0 drive model: CT500MX500SSD1 size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: 0204 drive rev: M3CR023 temp: 38 C scheme: GPT SMART: yes state: enabled health: PASSED on: 222d 13h cycles: 570 Old-Age: UDMA CRC errors: 2919 alert: Bad cable/connection? ID-3: /dev/sdb type: USB model: USB3.0 drive model: ST1000LM035-1RK172 size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5400 rpm rev: 0204 drive rev: LCM2 temp: 30 C scheme: MBR SMART: yes state: enabled health: PASSED on: 127d 6h cycles: 194 Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 2.70 GiB (4.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.4 MiB (21.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED ID-2: /dev/sda2 size: 438.22 GiB fs: apfs label: N/A uuid: 4426d37f-ad23-4e96-a8f6-dcf7bfc3c10f ID-3: /dev/sda3 size: 27.22 GiB fs: exfat label: Minecraft uuid: 5EB1-5617 ID-4: /dev/sdb1 size: 931.51 GiB fs: ntfs label: 950GB uuid: 92726C28726C12F1 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Device-2: 2-2:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 0.8% command: dropbear pid: 658 mem: 2.26 MiB (0.0%) 2: cpu: 0.7% command: init pid: 1 mem: 7.65 MiB (0.1%) 3: cpu: 0.4% command: -bash pid: 659 mem: 4.24 MiB (0.1%) 4: cpu: 0.4% command: bash pid: 698 mem: 2.80 MiB (0.0%) 5: cpu: 0.3% command: supervisord started by: python2 pid: 620 mem: 14.5 MiB (0.3%) Memory top: 5 1: mem: 15.5 MiB (0.3%) command: smbd pid: 615 cpu: 0.1% 2: mem: 14.5 MiB (0.3%) command: supervisord started by: python2 pid: 620 cpu: 0.3% 3: mem: 8.91 MiB (0.2%) command: nmbd pid: 607 cpu: 0.0% 4: mem: 7.65 MiB (0.1%) command: init pid: 1 cpu: 0.7% 5: mem: 6.67 MiB (0.1%) command: systemd-journald pid: 114 cpu: 0.1% Info: Processes: 97 Uptime: 5m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.88 GiB used: 129.1 MiB (3.3%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 141x41 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 1.42 TiB used: 2.75 GiB (0.2%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: External USB3.0 drive model: CT500MX500SSD1 
           size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s 
           rev: 0204 drive rev: M3CR023 temp: 38 C 
           scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 222d 13h cycles: 570 Old-Age: 
           UDMA CRC errors: 2919 alert: Bad cable/connection? 
           ID-3: /dev/sdb type: USB model: USB3.0 drive model: ST1000LM035-1RK172 size: 931.51 GiB 
           block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           rotation: 5400 rpm rev: 0204 drive rev: LCM2 temp: 30 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 127d 6h cycles: 194 Pre-Fail: 
           attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 2.70 GiB (4.6%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.4 MiB (21.6%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED 
           ID-2: /dev/sda2 size: 438.22 GiB fs: apfs label: N/A 
           uuid: 4426d37f-ad23-4e96-a8f6-dcf7bfc3c10f 
           ID-3: /dev/sda3 size: 27.22 GiB fs: exfat label: Minecraft uuid: 5EB1-5617 
           ID-4: /dev/sdb1 size: 931.51 GiB fs: ntfs label: 950GB uuid: 92726C28726C12F1 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Device-2: 2-2:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 0.8% command: dropbear pid: 658 mem: 2.26 MiB (0.0%) 
           2: cpu: 0.7% command: init pid: 1 mem: 7.65 MiB (0.1%) 
           3: cpu: 0.4% command: -bash pid: 659 mem: 4.24 MiB (0.1%) 
           4: cpu: 0.4% command: bash pid: 698 mem: 2.80 MiB (0.0%) 
           5: cpu: 0.3% command: supervisord started by: python2 pid: 620 mem: 14.5 MiB (0.3%) 
           Memory top: 5 
           1: mem: 15.5 MiB (0.3%) command: smbd pid: 615 cpu: 0.1% 
           2: mem: 14.5 MiB (0.3%) command: supervisord started by: python2 pid: 620 cpu: 0.3% 
           3: mem: 8.91 MiB (0.2%) command: nmbd pid: 607 cpu: 0.0% 
           4: mem: 7.65 MiB (0.1%) command: init pid: 1 cpu: 0.7% 
           5: mem: 6.67 MiB (0.1%) command: systemd-journald pid: 114 cpu: 0.1% 
Info:      Processes: 97 Uptime: 5m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23127 - Brand: SanDisk SD Ultra A1 (SC64G)