Benchmark #23201 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#3 / 1,700
1,827
#369 / 1,700
#356 / 989
#35 / 370
8,235
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-05 12:12:47
#23,201
4,976
-3,259 (-65.49%)
Anonymous
PI 4 with Kingston 126 Gb SSD on USB 3

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
126G
SSD
SanDisk
SDSSDP128G
1.8 inch
SATA
1d6b:3562
0x1d6b (Linux Foundation)
0x3562
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
188 MB/s
310.41 MB/s
203.15 MB/s
3,976 IOPS
10,058 IOPS
15,906 KB/s
40,235 KB/s
24,622 KB/s
20,039 KB/s
11,727 KB/s
13,354 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 253.9 MiB (12.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 118x74 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 146.35 GiB used: 2.75 GiB (1.9%) ID-1: /dev/mmcblk0 model: SD32G size: 28.97 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: ADplus SuperVer drive model: SDSSDP128G family: based SSDs size: 117.38 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rev: 6302 drive rev: 3.2.0 temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 4y 326d 17h cycles: 91 read: 6.24 TiB written: 45.21 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 117.13 GiB size: 115.29 GiB (98.43%) used: 2.70 GiB (2.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 28.71 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-2: 1-1.4:4 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:3562 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.8% command: init pid: 1 mem: 8.07 MiB (0.4%) 2: cpu: 0.4% command: smartd pid: 2438 mem: 3.18 MiB (0.1%) 3: cpu: 0.3% command: systemd-journald pid: 104 mem: 6.77 MiB (0.3%) 4: cpu: 0.3% command: systemd-udevd pid: 141 mem: 4.08 MiB (0.2%) 5: cpu: 0.2% command: fail2ban-server started by: python3 pid: 541 mem: 14.7 MiB (0.7%) Memory top: 5 1: mem: 48.9 MiB (2.5%) command: mysqld pid: 648 cpu: 0.2% 2: mem: 27.5 MiB (1.4%) command: jeecron.php started by: php pid: 1093 cpu: 0.1% 3: mem: 23.9 MiB (1.2%) command: apache2 pid: 641 cpu: 0.0% 4: mem: 15.4 MiB (0.7%) command: unattended-upgrade-shutdown started by: python3 pid: 536 cpu: 0.1% 5: mem: 14.7 MiB (0.7%) command: fail2ban-server started by: python3 pid: 541 cpu: 0.2% Info: Processes: 151 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 253.9 MiB (12.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 118x74 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 146.35 GiB used: 2.75 GiB (1.9%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 28.97 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: ADplus SuperVer drive model: SDSSDP128G 
           family: based SSDs size: 117.38 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.0 speed: 6.0 Gb/s rev: 6302 
           drive rev: 3.2.0 temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 4y 326d 17h cycles: 91 read: 6.24 TiB 
           written: 45.21 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 117.13 GiB size: 115.29 GiB (98.43%) used: 2.70 GiB (2.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 28.71 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Device-2: 1-1.4:4 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:3562 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.8% command: init pid: 1 mem: 8.07 MiB (0.4%) 
           2: cpu: 0.4% command: smartd pid: 2438 mem: 3.18 MiB (0.1%) 
           3: cpu: 0.3% command: systemd-journald pid: 104 mem: 6.77 MiB (0.3%) 
           4: cpu: 0.3% command: systemd-udevd pid: 141 mem: 4.08 MiB (0.2%) 
           5: cpu: 0.2% command: fail2ban-server started by: python3 pid: 541 mem: 14.7 MiB (0.7%) 
           Memory top: 5 
           1: mem: 48.9 MiB (2.5%) command: mysqld pid: 648 cpu: 0.2% 
           2: mem: 27.5 MiB (1.4%) command: jeecron.php started by: php pid: 1093 cpu: 0.1% 
           3: mem: 23.9 MiB (1.2%) command: apache2 pid: 641 cpu: 0.0% 
           4: mem: 15.4 MiB (0.7%) command: unattended-upgrade-shutdown started by: python3 
           pid: 536 cpu: 0.1% 
           5: mem: 14.7 MiB (0.7%) command: fail2ban-server started by: python3 pid: 541 cpu: 0.2% 
Info:      Processes: 151 Uptime: 4m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23201 - Brand: SanDisk SSD Plus