Benchmark #23211 - pibenchmarks.com

Brand: Panasonic SD
A1 C10 U1
#80 / 1,539
133
#1,226 / 1,539
#206 / 369
1,075
	Amazon.com Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.it Amazon.nl

Overview
2020-05-05 13:03:24
#23,211
1,165
+90 (+7.73%)
Anonymous
panasonic 16gb sd card

Secure Digital (SD) Card Details
Panasonic SD
A1 C10 U1
14G
SD
Panasonic
Y016U
SD
6.00
0x01
PA
1.3
01/2020
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31 MB/s
40.1 MB/s
39.93 MB/s
648 IOPS
2,660 IOPS
2,595 KB/s
10,641 KB/s
9,777 KB/s
2,439 KB/s
8,304 KB/s
2,230 KB/s

inxi Results
System: Kernel: 4.19.50-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0634f60c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes net.ifnames=0 biosdevname=0 avoid_safe_mode=1 rootwait quiet Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 380.8 MiB (9.6%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 147x51 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: iqaudio-dac driver: N/A bus ID: N/A chip ID: iqaudio:soc Device-3: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.50-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 126.24 GiB used: 4.38 GiB (3.5%) ID-1: /dev/mmcblk0 model: Y016U size: 14.45 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Crucial model: CT120M500SSD1 size: 111.79 GiB block size: physical: 4096 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.00 GiB size: 13.76 GiB (98.28%) used: 2.21 GiB (16.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 638417fb-7220-47b1-883c-e6fee02f51ac ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.0 MiB (15.5%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: B6BB-0F0E ID-3: /media/usb0 raw size: 256.0 MiB size: N/A (hidden?) used: N/A (hidden?) fs: vfat dev: /dev/sda1 label: boot uuid: B6BB-0F0E ID-4: /media/usb1 raw size: 3.08 GiB size: 3.00 GiB (97.46%) used: 2.13 GiB (71.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 638417fb-7220-47b1-883c-e6fee02f51ac Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: B6BB-0F0E ID-2: /dev/mmcblk0p3 size: 195.3 MiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Lite-On type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 04ca:0027 Device-2: 1-1.4:4 info: Microsoft Basic Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 045e:0084 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: Samsung Handheld type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 04e8:8001 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.5% command: shairport pid: 918 mem: 6.46 MiB (0.1%) 2: cpu: 0.3% command: bash pid: 8998 mem: 2.84 MiB (0.0%) 3: cpu: 0.1% command: init pid: 1 mem: 8.08 MiB (0.2%) 4: cpu: 0.1% command: xorg pid: 1020 mem: 47.0 MiB (1.2%) 5: cpu: 0.1% command: lxpanel pid: 1103 mem: 31.0 MiB (0.8%) Memory top: 5 1: mem: 47.0 MiB (1.2%) command: xorg pid: 1020 cpu: 0.1% 2: mem: 31.0 MiB (0.8%) command: lxpanel pid: 1103 cpu: 0.1% 3: mem: 22.6 MiB (0.5%) command: squeezelite pid: 882 cpu: 0.0% 4: mem: 20.1 MiB (0.5%) command: pcmanfm pid: 1105 cpu: 0.0% 5: mem: 18.6 MiB (0.4%) command: pulseaudio pid: 1125 cpu: 0.0% Info: Processes: 170 Uptime: 53m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.50-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=0634f60c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes 
           net.ifnames=0 biosdevname=0 avoid_safe_mode=1 rootwait quiet 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 380.8 MiB (9.6%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 147x51 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: iqaudio-dac driver: N/A bus ID: N/A chip ID: iqaudio:soc 
           Device-3: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.50-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 126.24 GiB used: 4.38 GiB (3.5%) 
           ID-1: /dev/mmcblk0 model: Y016U size: 14.45 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Crucial model: CT120M500SSD1 size: 111.79 GiB 
           block size: physical: 4096 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.00 GiB size: 13.76 GiB (98.28%) used: 2.21 GiB (16.1%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 638417fb-7220-47b1-883c-e6fee02f51ac 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.0 MiB (15.5%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: B6BB-0F0E 
           ID-3: /media/usb0 raw size: 256.0 MiB size: N/A (hidden?) used: N/A (hidden?) fs: vfat 
           dev: /dev/sda1 label: boot uuid: B6BB-0F0E 
           ID-4: /media/usb1 raw size: 3.08 GiB size: 3.00 GiB (97.46%) used: 2.13 GiB (71.1%) 
           fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 638417fb-7220-47b1-883c-e6fee02f51ac 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: B6BB-0F0E 
           ID-2: /dev/mmcblk0p3 size: 195.3 MiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Lite-On type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 04ca:0027 
           Device-2: 1-1.4:4 info: Microsoft Basic Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 045e:0084 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: Samsung Handheld type: Mass Storage driver: uas interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 04e8:8001 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.5% command: shairport pid: 918 mem: 6.46 MiB (0.1%) 
           2: cpu: 0.3% command: bash pid: 8998 mem: 2.84 MiB (0.0%) 
           3: cpu: 0.1% command: init pid: 1 mem: 8.08 MiB (0.2%) 
           4: cpu: 0.1% command: xorg pid: 1020 mem: 47.0 MiB (1.2%) 
           5: cpu: 0.1% command: lxpanel pid: 1103 mem: 31.0 MiB (0.8%) 
           Memory top: 5 
           1: mem: 47.0 MiB (1.2%) command: xorg pid: 1020 cpu: 0.1% 
           2: mem: 31.0 MiB (0.8%) command: lxpanel pid: 1103 cpu: 0.1% 
           3: mem: 22.6 MiB (0.5%) command: squeezelite pid: 882 cpu: 0.0% 
           4: mem: 20.1 MiB (0.5%) command: pcmanfm pid: 1105 cpu: 0.0% 
           5: mem: 18.6 MiB (0.4%) command: pulseaudio pid: 1125 cpu: 0.0% 
Info:      Processes: 170 Uptime: 53m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23211 - Brand: Panasonic SD