Benchmark #23332 - pibenchmarks.com

Brand: SanDisk Ultra 3D NAND
SSD (2.5" SATA)
#165 / 1,701
110
#601 / 1,701
#578 / 990
#126 / 370
6,574
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-06 03:58:14
#23,332
5,861
-713 (-12.17%)
Anonymous

Storage Details
SanDisk Ultra 3D NAND
SSD (2.5" SATA)
250G
SSD
SanDisk
SDSSDH3250G
2.5 inch
SATA
3.00
5,000
152d:3562
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x3562
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
179 MB/s
169.84 MB/s
145.77 MB/s
5,703 IOPS
4,104 IOPS
22,812 KB/s
16,416 KB/s
23,946 KB/s
18,263 KB/s
16,614 KB/s
22,072 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1366x768M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:3562:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 319.4 MiB (8.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev tty: 120x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 232.89 GiB used: 3.51 GiB (1.5%) ID-1: /dev/sda type: USB model: ADplus SuperVer drive model: SDSSDH3 250G size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: 6302 drive rev: 401120RL temp: 41 C scheme: MBR SMART: yes state: enabled health: PASSED on: 72 hrs cycles: 67 read: 301 KiB written: 39 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 152.38 GiB size: 149.86 GiB (98.35%) used: 3.45 GiB (2.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:3562 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 1.0% command: [kworker/u8:4-brcmf_wq/mmc1:0001:1] pid: 2029 mem: 0.00 MiB (0.0%) 2: cpu: 0.6% command: smartd pid: 2524 mem: 3.18 MiB (0.0%) 3: cpu: 0.5% command: avahi-daemon: pid: 367 mem: 3.01 MiB (0.0%) 4: cpu: 0.4% command: init pid: 1 mem: 8.13 MiB (0.2%) 5: cpu: 0.3% command: packagekitd pid: 2207 mem: 12.7 MiB (0.3%) Memory top: 5 1: mem: 49.3 MiB (1.2%) command: xorg pid: 584 cpu: 0.1% 2: mem: 28.0 MiB (0.7%) command: lxpanel pid: 857 cpu: 0.1% 3: mem: 24.1 MiB (0.6%) command: pcmanfm pid: 859 cpu: 0.0% 4: mem: 14.9 MiB (0.3%) command: fail2ban-server started by: python3 pid: 463 cpu: 0.1% 5: mem: 13.8 MiB (0.3%) command: openbox pid: 852 cpu: 0.0% Info: Processes: 175 Uptime: 20m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1366x768M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:3562:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 319.4 MiB (8.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           tty: 120x40 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 232.89 GiB used: 3.51 GiB (1.5%) 
           ID-1: /dev/sda type: USB model: ADplus SuperVer drive model: SDSSDH3 250G 
           size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s 
           rev: 6302 drive rev: 401120RL temp: 41 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 72 hrs cycles: 67 read: 301 KiB 
           written: 39 KiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 152.38 GiB size: 149.86 GiB (98.35%) used: 3.45 GiB (2.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 53.3 MiB (21.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 6341-C9E5 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:3562 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 1.0% command: [kworker/u8:4-brcmf_wq/mmc1:0001:1] pid: 2029 
           mem: 0.00 MiB (0.0%) 
           2: cpu: 0.6% command: smartd pid: 2524 mem: 3.18 MiB (0.0%) 
           3: cpu: 0.5% command: avahi-daemon: pid: 367 mem: 3.01 MiB (0.0%) 
           4: cpu: 0.4% command: init pid: 1 mem: 8.13 MiB (0.2%) 
           5: cpu: 0.3% command: packagekitd pid: 2207 mem: 12.7 MiB (0.3%) 
           Memory top: 5 
           1: mem: 49.3 MiB (1.2%) command: xorg pid: 584 cpu: 0.1% 
           2: mem: 28.0 MiB (0.7%) command: lxpanel pid: 857 cpu: 0.1% 
           3: mem: 24.1 MiB (0.6%) command: pcmanfm pid: 859 cpu: 0.0% 
           4: mem: 14.9 MiB (0.3%) command: fail2ban-server started by: python3 pid: 463 cpu: 0.1% 
           5: mem: 13.8 MiB (0.3%) command: openbox pid: 852 cpu: 0.0% 
Info:      Processes: 175 Uptime: 20m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23332 - Brand: SanDisk Ultra 3D NAND