Benchmark #23433 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,701
935
#437 / 1,701
#421 / 990
#53 / 370
7,565
	Amazon.com AliExpress

Overview
2020-05-06 20:29:31
#23,433
3,167
-4,398 (-138.87%)
Anonymous
Kingston A400 SSD on Pi 4 using StarTech SATA to USB adapter

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
SSD
JMicron
JMicronTech
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.4 LTS
aarch64

Benchmark Results
47.4 MB/s
1,984 IOPS
2,670 IOPS
7,936 KB/s
10,680 KB/s
15,901 KB/s
13,976 KB/s
11,971 KB/s
16,036 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 64 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 datadev=UUID=29816f4f-a2e8-496b-94fe-fd7e8ce94e6f Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 580.4 MiB (14.9%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 175x63 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 140.70 GiB used: 0 KiB (0.0%) ID-1: /dev/mmcblk0 model: Y032V size: 28.91 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 111.79 GiB block size: physical: 4096 B logical: 512 B rev: 0509 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: Message: No Partition data was found. Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/mmcblk0p1 size: 28.91 GiB fs: vfat label: N/A uuid: F661-9A35 ID-2: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A ID-3: /dev/sda2 size: 111.67 GiB fs: ext4 label: berryboot uuid: 29816f4f-a2e8-496b-94fe-fd7e8ce94e6f USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 0.9% command: systemd pid: 1 mem: 8.28 MiB (0.2%) 2: cpu: 0.8% command: [jbd2/sda2-8] pid: 110 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: dbus-daemon pid: 661 mem: 4.02 MiB (0.1%) 4: cpu: 0.1% command: [rcu_preempt] pid: 10 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/1:1h-kb] pid: 86 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 18.7 MiB (0.5%) command: unattended-upgrade-shutdown started by: python3 pid: 688 cpu: 0.0% 2: mem: 15.9 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 657 cpu: 0.0% 3: mem: 8.70 MiB (0.2%) command: systemd-journald pid: 1889 cpu: 0.0% 4: mem: 8.28 MiB (0.2%) command: systemd pid: 1 cpu: 0.9% 5: mem: 6.52 MiB (0.1%) command: polkitd pid: 674 cpu: 0.0% Info: Processes: 120 Uptime: 26m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 64 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=10 
           datadev=UUID=29816f4f-a2e8-496b-94fe-fd7e8ce94e6f 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 580.4 MiB (14.9%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 175x63 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 140.70 GiB used: 0 KiB (0.0%) 
           ID-1: /dev/mmcblk0 model: Y032V size: 28.91 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 111.79 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0509 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: Message: No Partition data was found. 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/mmcblk0p1 size: 28.91 GiB fs: vfat label: N/A uuid: F661-9A35 
           ID-2: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/sda2 size: 111.67 GiB fs: ext4 label: berryboot 
           uuid: 29816f4f-a2e8-496b-94fe-fd7e8ce94e6f 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 0.9% command: systemd pid: 1 mem: 8.28 MiB (0.2%) 
           2: cpu: 0.8% command: [jbd2/sda2-8] pid: 110 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.2% command: dbus-daemon pid: 661 mem: 4.02 MiB (0.1%) 
           4: cpu: 0.1% command: [rcu_preempt] pid: 10 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: [kworker/1:1h-kb] pid: 86 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 18.7 MiB (0.5%) command: unattended-upgrade-shutdown started by: python3 
           pid: 688 cpu: 0.0% 
           2: mem: 15.9 MiB (0.4%) command: networkd-dispatcher started by: python3 pid: 657 
           cpu: 0.0% 
           3: mem: 8.70 MiB (0.2%) command: systemd-journald pid: 1889 cpu: 0.0% 
           4: mem: 8.28 MiB (0.2%) command: systemd pid: 1 cpu: 0.9% 
           5: mem: 6.52 MiB (0.1%) command: polkitd pid: 674 cpu: 0.0% 
Info:      Processes: 120 Uptime: 26m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.20-release inxi: 3.1.00

Benchmark #23433 - Brand: Undentified JMicron USB to SATA Adapter