Benchmark #23471 - pibenchmarks.com

Brand: Crucial MX500 Series
SSD (2.5" SATA)
#27 / 1,675
524
#518 / 1,675
#500 / 984
#93 / 370
6,913
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-07 08:00:43
#23,471
10,855
+3,942 (+36.32%)
dasza77

Storage Details
Crucial MX500 Series
SSD (2.5" SATA)
500G
SSD
Crucial
CT500MX500SSD1
2.5 inch
SATA
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,750 (+250)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
248 MB/s
218.68 MB/s
228.73 MB/s
37,996 IOPS
5,215 IOPS
151,985 KB/s
20,860 KB/s
30,879 KB/s
29,730 KB/s
20,533 KB/s
28,804 KB/s

inxi Results
System: Host: DietPi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=768 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 154.2 MiB (3.9%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 444 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 157x51 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fe80::dea6:32ff:fe9c:ef45/64 scope: link WAN IP: 83.26.X.X Drives: Local Storage: total: 495.48 GiB used: 3.68 GiB (0.7%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: External USB3.0 drive model: CT500MX500SSD1 size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s drive rev: 0204 drive rev: M3CR023 temp: 38 C scheme: GPT SMART: yes state: enabled health: PASSED on: 223d 4h cycles: 597 Old-Age: UDMA CRC errors: 2983 alert: Bad cable/connection? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 1.92 GiB (6.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /mnt/SSD raw size: 27.22 GiB size: 27.22 GiB (99.99%) used: 1.71 GiB (6.3%) fs: f2fs block size: 4096 B dev: /dev/sda3 label: N/A uuid: 14b83b1b-b893-4cbc-95be-bd62f427fb3f Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED ID-2: /dev/sda2 size: 438.22 GiB fs: apfs label: N/A uuid: 4426d37f-ad23-4e96-a8f6-dcf7bfc3c10f USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: MosArt type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 062a:412f Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https://archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 3.1% command: node pid: 1304 mem: 36.1 MiB (0.9%) 2: cpu: 1.8% command: [kworker/u8:3-events_unbound] pid: 946 mem: 0.00 MiB (0.0%) 3: cpu: 1.1% command: init pid: 1 mem: 7.81 MiB (0.1%) 4: cpu: 0.7% command: supervisord started by: python2 pid: 1271 mem: 14.7 MiB (0.3%) 5: cpu: 0.5% command: [usb-storage] pid: 193 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 36.1 MiB (0.9%) command: node pid: 1304 cpu: 3.1% 2: mem: 14.7 MiB (0.3%) command: supervisord started by: python2 pid: 1271 cpu: 0.7% 3: mem: 7.81 MiB (0.1%) command: init pid: 1 cpu: 1.1% 4: mem: 7.62 MiB (0.1%) command: systemd-journald pid: 98 cpu: 0.1% 5: mem: 4.75 MiB (0.1%) command: dhclient pid: 485 cpu: 0.0% Info: Processes: 113 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 inxi: 3.1.00

inxi Results

System:    Host: DietPi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=768 
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0578:u console=ttyS0,115200 console=tty1 
           root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
Memory:    RAM: total: 3.88 GiB used: 154.2 MiB (3.9%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 444 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 157x51 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X 
           IP v6: fe80::dea6:32ff:fe9c:ef45/64 scope: link 
           WAN IP: 83.26.X.X 
Drives:    Local Storage: total: 495.48 GiB used: 3.68 GiB (0.7%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: External USB3.0 drive model: CT500MX500SSD1 size: 465.76 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s drive 
           rev: 0204 drive rev: M3CR023 temp: 38 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 223d 4h cycles: 597 Old-Age: UDMA CRC errors: 2983 
           alert: Bad cable/connection? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 1.92 GiB (6.6%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /mnt/SSD raw size: 27.22 GiB size: 27.22 GiB (99.99%) used: 1.71 GiB (6.3%) fs: f2fs block size: 4096 B 
           dev: /dev/sda3 label: N/A uuid: 14b83b1b-b893-4cbc-95be-bd62f427fb3f 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED 
           ID-2: /dev/sda2 size: 438.22 GiB fs: apfs label: N/A uuid: 4426d37f-ad23-4e96-a8f6-dcf7bfc3c10f 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: MosArt type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 
           speed: 12 Mb/s chip ID: 062a:412f 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https://archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 3.1% command: node pid: 1304 mem: 36.1 MiB (0.9%) 
           2: cpu: 1.8% command: [kworker/u8:3-events_unbound] pid: 946 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.1% command: init pid: 1 mem: 7.81 MiB (0.1%) 
           4: cpu: 0.7% command: supervisord started by: python2 pid: 1271 mem: 14.7 MiB (0.3%) 
           5: cpu: 0.5% command: [usb-storage] pid: 193 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 36.1 MiB (0.9%) command: node pid: 1304 cpu: 3.1% 
           2: mem: 14.7 MiB (0.3%) command: supervisord started by: python2 pid: 1271 cpu: 0.7% 
           3: mem: 7.81 MiB (0.1%) command: init pid: 1 cpu: 1.1% 
           4: mem: 7.62 MiB (0.1%) command: systemd-journald pid: 98 cpu: 0.1% 
           5: mem: 4.75 MiB (0.1%) command: dhclient pid: 485 cpu: 0.0% 
Info:      Processes: 113 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           inxi: 3.1.00

Benchmark #23471 - Brand: Crucial MX500 Series