Benchmark #23516 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,675
893
#436 / 1,675
#422 / 984
#49 / 370
7,433
	Amazon.com AliExpress

Overview
2020-05-07 14:18:22
#23,516
8,629
+1,196 (+13.86%)
Anonymous
Kingston A2000 SSD on Pi 4 using JMS583 NVMe to USB3 adapter

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
232.9G
SSD
JMicron
JMicronTech
3.20
5,000
1d6b:0562
0x1d6b (Linux Foundation)
0x0562 (Netac Portable SSD Z6s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
190 MB/s
304.23 MB/s
285.06 MB/s
8,152 IOPS
21,091 IOPS
32,611 KB/s
84,366 KB/s
31,307 KB/s
26,854 KB/s
28,926 KB/s
32,868 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 rootwait rootdelay=5 elevator=deadline fsck.repair=yes Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 608.5 MiB (15.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x40 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: down mac: IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth03ef08e state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth22afd9a state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth56a1232 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth781de55 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethb1da3d0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 351.97 GiB used: 6.84 GiB (1.9%) ID-1: /dev/mmcblk0 model: SN128 size: 119.08 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 232.89 GiB block size: physical: 4096 B logical: 512 B rev: 0204 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.88 GiB size: 228.23 GiB (98.00%) used: 3.39 GiB (1.5%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: root uuid: 720c038a-b7f0-4d9b-9f82-7db392f629bc ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/1a6bed1e1120492e7ce6f803d15dadc95c5c53d43785bbbf9155c15faaf22b84/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/31f2a3ff416ba80fb79683c491cc0122ad258a6aba3eb60f7d8e05c3adcda1ba/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/48724c33139dba07457aa19b9e96fef0f05863f764621193b7c357c77e2f2660/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/5e51a41afbfc3d9c903c0bca19ac254c729dc6910e2737a17f2562b88c908e4f/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/8955b5bb5d3e7a2aec16e13723645a653dd3ba0641a35e02bc3c5ce39ca336e5/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/a5260bec539024b92ce92c45a38d6e9f49b5caaefa0dee20f4d1fce3bc38f8c5/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 118.83 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0562 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 20.1% command: dockerd pid: 5046 mem: 90.1 MiB (2.3%) 2: cpu: 3.9% command: python3 pid: 9554 mem: 76.6 MiB (1.9%) 3: cpu: 2.7% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 9640 mem: 0.00 MiB (0.0%) 4: cpu: 1.5% command: [kworker/u8:1-events_unbound] pid: 4012 mem: 0.00 MiB (0.0%) 5: cpu: 1.3% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 90.1 MiB (2.3%) command: dockerd pid: 5046 cpu: 20.1% 2: mem: 76.6 MiB (1.9%) command: python3 pid: 9554 cpu: 3.9% 3: mem: 46.4 MiB (1.1%) command: docker pid: 6440 cpu: 0.0% 4: mem: 38.0 MiB (0.9%) command: python3 pid: 6830 cpu: 0.7% 5: mem: 33.8 MiB (0.8%) command: containerd pid: 4956 cpu: 0.4% Info: Processes: 172 Uptime: 24m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda1 
           rootfstype=ext4 rootwait rootdelay=5 elevator=deadline fsck.repair=yes 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 608.5 MiB (15.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x40 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: down mac:  
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth03ef08e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth22afd9a state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth56a1232 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth781de55 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethb1da3d0 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 351.97 GiB used: 6.84 GiB (1.9%) 
           ID-1: /dev/mmcblk0 model: SN128 size: 119.08 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 232.89 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0204 scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.88 GiB size: 228.23 GiB (98.00%) used: 3.39 GiB (1.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: root 
           uuid: 720c038a-b7f0-4d9b-9f82-7db392f629bc 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/1a6bed1e1120492e7ce6f803d15dadc95c5c53d43785bbbf9155c15faaf22b84/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/31f2a3ff416ba80fb79683c491cc0122ad258a6aba3eb60f7d8e05c3adcda1ba/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/48724c33139dba07457aa19b9e96fef0f05863f764621193b7c357c77e2f2660/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/5e51a41afbfc3d9c903c0bca19ac254c729dc6910e2737a17f2562b88c908e4f/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/8955b5bb5d3e7a2aec16e13723645a653dd3ba0641a35e02bc3c5ce39ca336e5/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/a5260bec539024b92ce92c45a38d6e9f49b5caaefa0dee20f4d1fce3bc38f8c5/merged raw size: N/A size: 228.23 GiB used: 3.39 GiB (1.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 118.83 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0562 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 20.1% command: dockerd pid: 5046 mem: 90.1 MiB (2.3%) 
           2: cpu: 3.9% command: python3 pid: 9554 mem: 76.6 MiB (1.9%) 
           3: cpu: 2.7% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 9640 
           mem: 0.00 MiB (0.0%) 
           4: cpu: 1.5% command: [kworker/u8:1-events_unbound] pid: 4012 mem: 0.00 MiB (0.0%) 
           5: cpu: 1.3% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 90.1 MiB (2.3%) command: dockerd pid: 5046 cpu: 20.1% 
           2: mem: 76.6 MiB (1.9%) command: python3 pid: 9554 cpu: 3.9% 
           3: mem: 46.4 MiB (1.1%) command: docker pid: 6440 cpu: 0.0% 
           4: mem: 38.0 MiB (0.9%) command: python3 pid: 6830 cpu: 0.7% 
           5: mem: 33.8 MiB (0.8%) command: containerd pid: 4956 cpu: 0.4% 
Info:      Processes: 172 Uptime: 24m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23516 - Brand: Undentified JMicron USB to SATA Adapter