Benchmark #23629 - pibenchmarks.com

Brand: TCSUNBOW X3 Series
SSD (2.5" SATA)
#435 / 1,675
22
#751 / 1,675
#725 / 984
#224 / 370
5,690
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.se Amazon.sg

Overview
2020-05-08 04:42:42
#23,629
4,006
-1,684 (-42.04%)
Anonymous
RPI4 SSD TCSunBow 60 Go

Storage Details
TCSUNBOW X3 Series
SSD (2.5" SATA)
60G
SSD
TCSUNBOW
X360GB
2.5 inch
SATA
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.4 MB/s
240.05 MB/s
158.83 MB/s
3,223 IOPS
4,369 IOPS
12,892 KB/s
17,478 KB/s
26,121 KB/s
23,314 KB/s
18,541 KB/s
19,564 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0578:u dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.96 GiB used: 236.8 MiB (11.8%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 204x70 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Device-1: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus ID: 2-2:3 chip ID: 0bda:8153 IF: eth1 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 70.74 GiB used: 29.42 GiB (41.6%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: USB3.0 USB Device drive model: X3 60GB size: 55.90 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0203 drive rev: R0529A temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 287d 11h cycles: 123 read: 3.9 MiB written: 8.6 MiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 55.64 GiB size: 54.78 GiB (98.44%) used: 29.37 GiB (53.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.3.2:6 info: Texas Instruments type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16a8 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Device-3: 2-2:3 info: Realtek RTL8153 Gigabit Ethernet Adapter type: Network driver: r8152 interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bda:8153 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x buster main 2: deb-src https: //deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 91.1% command: sshd: pid: 15792 mem: 7.02 MiB (0.3%) 2: cpu: 56.0% command: stats.cgi pid: 21222 mem: 27.7 MiB (1.3%) 3: cpu: 19.6% command: sftp-server pid: 15797 mem: 1.73 MiB (0.0%) 4: cpu: 0.7% command: [ksoftirqd/0] pid: 9 mem: 0.00 MiB (0.0%) 5: cpu: 0.6% command: packagekitd pid: 21104 mem: 12.5 MiB (0.6%) Memory top: 5 1: mem: 34.0 MiB (1.7%) command: node pid: 26685 cpu: 0.0% 2: mem: 27.7 MiB (1.3%) command: stats.cgi pid: 21222 cpu: 56.0% 3: mem: 19.7 MiB (0.9%) command: pihole-ftl pid: 995 cpu: 0.0% 4: mem: 18.4 MiB (0.9%) command: miniserv.pl started by: perl pid: 910 cpu: 0.0% 5: mem: 12.5 MiB (0.6%) command: packagekitd pid: 21104 cpu: 0.6% Info: Processes: 139 Uptime: 12h 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 usb-storage.quirks=152d:0578:u dwc_otg.lpm_enable=0 
           console=ttyAMA0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.96 GiB used: 236.8 MiB (11.8%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 204x70 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Device-1: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 
           bus ID: 2-2:3 chip ID: 0bda:8153 IF: eth1 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 70.74 GiB used: 29.42 GiB (41.6%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: USB3.0 USB Device drive model: X3 60GB size: 55.90 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0203 drive rev: R0529A temp: 40 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 287d 11h cycles: 123 read: 3.9 MiB 
           written: 8.6 MiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 55.64 GiB size: 54.78 GiB (98.44%) used: 29.37 GiB (53.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.3.2:6 info: Texas Instruments type: Abstract (modem),CDC-Data 
           driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16a8 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
           Device-3: 2-2:3 info: Realtek RTL8153 Gigabit Ethernet Adapter type: Network 
           driver: r8152 interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0bda:8153 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x buster main
           2: deb-src https: //deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 91.1% command: sshd: pid: 15792 mem: 7.02 MiB (0.3%) 
           2: cpu: 56.0% command: stats.cgi pid: 21222 mem: 27.7 MiB (1.3%) 
           3: cpu: 19.6% command: sftp-server pid: 15797 mem: 1.73 MiB (0.0%) 
           4: cpu: 0.7% command: [ksoftirqd/0] pid: 9 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.6% command: packagekitd pid: 21104 mem: 12.5 MiB (0.6%) 
           Memory top: 5 
           1: mem: 34.0 MiB (1.7%) command: node pid: 26685 cpu: 0.0% 
           2: mem: 27.7 MiB (1.3%) command: stats.cgi pid: 21222 cpu: 56.0% 
           3: mem: 19.7 MiB (0.9%) command: pihole-ftl pid: 995 cpu: 0.0% 
           4: mem: 18.4 MiB (0.9%) command: miniserv.pl started by: perl pid: 910 cpu: 0.0% 
           5: mem: 12.5 MiB (0.6%) command: packagekitd pid: 21104 cpu: 0.6% 
Info:      Processes: 139 Uptime: 12h 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23629 - Brand: TCSUNBOW X3 Series