Benchmark #23630 - pibenchmarks.com

Brand: Western Digital Blue 3.5" HDD
HDD (3.5" SATA)
#399 / 1,672
24
#1,055 / 1,672
#21 / 68
#9 / 30
2,334
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-08 04:44:26
#23,630
2,293
-41 (-1.79%)
Anonymous
Western Digital model: WD10EZEX-00KUWA0 on Pi 4

Storage Details
Western Digital Blue 3.5" HDD
HDD (3.5" SATA)
1000G
HDD
WDC
WD10EZEX-00KUWA0
SATA
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
140 MB/s
181.19 MB/s
303.89 MB/s
761 IOPS
799 IOPS
3,044 KB/s
3,199 KB/s
24,641 KB/s
18,477 KB/s
1,755 KB/s
2,503 KB/s

inxi Results
System: Host: piwigopi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=24083d64-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait rootdelay=5 usb-storage.quirks=152d:1561:u Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 286.3 MiB (7.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 272x72 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2a01:e34:ee0f:1460:e1a9:5c75:539b:2f34/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::5b31:a62b:3118:34f/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 78.224.X.X Drives: Local Storage: total: 1.38 TiB used: 53.88 GiB (3.8%) ID-1: /dev/mmcblk0 model: SD32G size: 28.93 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD10EZEX-00KUWA0 family: Blue size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s WD-WCC1S5958056 rev: 15.01H15 temp: 44 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 90d 4h cycles: 1101 ID-3: /dev/sdb type: USB model: USB DISK Pro size: 7.21 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-4: /dev/sdc type: USB vendor: Sabrent model: SABRENT drive vendor: Kingston drive model: SA400S37480G size: 447.13 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s drive rev: 0204 drive rev: SBFKK1B3 temp: 31 C SMART: yes state: enabled health: PASSED on: 13d 1h cycles: 77 read: 261.00 GiB written: 101.00 GiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 3.00 GiB size: 2.83 GiB (94.27%) used: 2.02 GiB (71.5%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: ROOTFS uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /media/database raw size: 3.95 GiB size: 3.83 GiB (96.85%) used: 127.4 MiB (3.2%) fs: ext4 block size: 4096 B dev: /dev/dm-2 label: N/A uuid: 916dded4-69b6-4500-983d-71ec4ceab524 ID-4: /media/photos raw size: 250.00 GiB size: 245.95 GiB (98.38%) used: 16.48 GiB (6.7%) fs: ext4 block size: 4096 B dev: /dev/dm-0 label: N/A uuid: 4df588b5-84b0-4238-9c74-c1f6362cc2eb ID-5: /mnt/sauvegarde raw size: 826.51 GiB size: 812.53 GiB (98.31%) used: 35.21 GiB (4.3%) fs: ext4 block size: 4096 B dev: /dev/dm-1 label: N/A uuid: 09dbbd9d-6124-4114-8e8e-9db587044f66 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 13.8 MiB (13.8%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 28.67 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 100.00 GiB fs: lvm2_member label: N/A uuid: gzAgge-x3MS-d7Xt-zhGs-5Fwz-4GP6-fZxZ82 ID-3: /dev/sda2 size: 5.00 GiB fs: lvm2_member label: N/A uuid: 9J6s2y-jPmb-OrcX-nQlW-g858-e3U0-Qdeejp ID-4: /dev/sda3 size: 826.51 GiB fs: lvm2_member label: N/A uuid: pXRSXl-mGWe-phdT-lB59-CfK1-G1Ny-rkbqFP ID-5: /dev/sdb1 size: 256.0 MiB fs: vfat label: N/A uuid: 4BBD-D3E7 ID-6: /dev/sdb3 size: 3.96 GiB fs: lvm2_member label: N/A uuid: 3tPxYX-7B68-j8bc-1HaD-TvN0-bz49-c43Lod USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Kingston type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 13fe:4123 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Device-3: 2-2:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.1% command: [usb-storage] pid: 84 mem: 0.00 MiB (0.0%) 2: cpu: 0.6% command: [kswapd0] pid: 47 mem: 0.00 MiB (0.0%) 3: cpu: 0.6% command: [usb-storage] pid: 81 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: bash pid: 6311 mem: 2.82 MiB (0.0%) 5: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 7.73 MiB (0.1%) command: systemd-journald pid: 113 cpu: 0.0% 2: mem: 7.43 MiB (0.1%) command: init pid: 1 cpu: 0.1% 3: mem: 6.64 MiB (0.1%) command: systemd pid: 735 cpu: 0.0% 4: mem: 5.79 MiB (0.1%) command: sshd: pid: 729 cpu: 0.0% 5: mem: 5.73 MiB (0.1%) command: sshd: pid: 1620 cpu: 0.0% Info: Processes: 143 Uptime: 59m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: testStorage.sh (sudo) inxi: 3.1.00

inxi Results

System:    Host: piwigopi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=24083d64-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait rootdelay=5 usb-storage.quirks=152d:1561:u 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
Memory:    RAM: total: 3.89 GiB used: 286.3 MiB (7.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 272x72 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: 2a01:e34:ee0f:1460:e1a9:5c75:539b:2f34/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::5b31:a62b:3118:34f/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 78.224.X.X 
Drives:    Local Storage: total: 1.38 TiB used: 53.88 GiB (3.8%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 28.93 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD10EZEX-00KUWA0 family: Blue size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s WD-WCC1S5958056 rev: 15.01H15 temp: 44 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 90d 4h cycles: 1101 
           ID-3: /dev/sdb type: USB model: USB DISK Pro size: 7.21 GiB block size: physical: 512 B logical: 512 B 
           rev: PMAP scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-4: /dev/sdc type: USB vendor: Sabrent model: SABRENT drive vendor: Kingston drive model: SA400S37480G 
           size: 447.13 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           drive rev: 0204 drive rev: SBFKK1B3 temp: 31 C 
           SMART: yes state: enabled health: PASSED on: 13d 1h cycles: 77 read: 261.00 GiB written: 101.00 GiB Old-Age: 
           media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 3.00 GiB size: 2.83 GiB (94.27%) used: 2.02 GiB (71.5%) fs: ext4 block size: 4096 B 
           dev: /dev/sdb2 label: ROOTFS uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /media/database raw size: 3.95 GiB size: 3.83 GiB (96.85%) used: 127.4 MiB (3.2%) fs: ext4 block size: 4096 B 
           dev: /dev/dm-2 label: N/A uuid: 916dded4-69b6-4500-983d-71ec4ceab524 
           ID-4: /media/photos raw size: 250.00 GiB size: 245.95 GiB (98.38%) used: 16.48 GiB (6.7%) fs: ext4 
           block size: 4096 B dev: /dev/dm-0 label: N/A uuid: 4df588b5-84b0-4238-9c74-c1f6362cc2eb 
           ID-5: /mnt/sauvegarde raw size: 826.51 GiB size: 812.53 GiB (98.31%) used: 35.21 GiB (4.3%) fs: ext4 
           block size: 4096 B dev: /dev/dm-1 label: N/A uuid: 09dbbd9d-6124-4114-8e8e-9db587044f66 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 13.8 MiB (13.8%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 28.67 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 100.00 GiB fs: lvm2_member label: N/A uuid: gzAgge-x3MS-d7Xt-zhGs-5Fwz-4GP6-fZxZ82 
           ID-3: /dev/sda2 size: 5.00 GiB fs: lvm2_member label: N/A uuid: 9J6s2y-jPmb-OrcX-nQlW-g858-e3U0-Qdeejp 
           ID-4: /dev/sda3 size: 826.51 GiB fs: lvm2_member label: N/A uuid: pXRSXl-mGWe-phdT-lB59-CfK1-G1Ny-rkbqFP 
           ID-5: /dev/sdb1 size: 256.0 MiB fs: vfat label: N/A uuid: 4BBD-D3E7 
           ID-6: /dev/sdb3 size: 3.96 GiB fs: lvm2_member label: N/A uuid: 3tPxYX-7B68-j8bc-1HaD-TvN0-bz49-c43Lod 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Kingston type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 13fe:4123 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge 
           ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Device-3: 2-2:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.1% command: [usb-storage] pid: 84 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.6% command: [kswapd0] pid: 47 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.6% command: [usb-storage] pid: 81 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.4% command: bash pid: 6311 mem: 2.82 MiB (0.0%) 
           5: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.73 MiB (0.1%) command: systemd-journald pid: 113 cpu: 0.0% 
           2: mem: 7.43 MiB (0.1%) command: init pid: 1 cpu: 0.1% 
           3: mem: 6.64 MiB (0.1%) command: systemd pid: 735 cpu: 0.0% 
           4: mem: 5.79 MiB (0.1%) command: sshd: pid: 729 cpu: 0.0% 
           5: mem: 5.73 MiB (0.1%) command: sshd: pid: 1620 cpu: 0.0% 
Info:      Processes: 143 Uptime: 59m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Shell: testStorage.sh (sudo) inxi: 3.1.00

Benchmark #23630 - Brand: Western Digital Blue 3.5" HDD