Benchmark #23643 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,539
1,343
#571 / 1,539
#550 / 875
#172 / 363
5,919
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-08 06:27:08
#23,643
4,440
-1,479 (-33.31%)
Anonymous
SanDisk SSD Plus 120GB on Pi 4 using Logilink USB 3.0 to SATA 6G Adapter

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SSDPLUS120GB
2.5 inch
SATA
3.00
5,000
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
138 MB/s
178.05 MB/s
133 MB/s
4,392 IOPS
3,297 IOPS
17,568 KB/s
13,189 KB/s
23,026 KB/s
20,817 KB/s
12,001 KB/s
15,377 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=abe4e5b2-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 422.2 MiB (10.6%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 130x60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: dormant mac: WAN IP: Drives: Local Storage: total: 126.25 GiB used: 9.69 GiB (7.7%) ID-1: /dev/mmcblk0 model: SD16G size: 14.46 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UE5100RL temp: 48 C scheme: MBR SMART: yes state: enabled health: PASSED on: 7 hrs cycles: 23 read: 3 KiB written: 11 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.20 GiB size: 13.95 GiB (98.28%) used: 2.92 GiB (20.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /mnt/backup raw size: 78.12 GiB size: 76.40 GiB (97.79%) used: 6.73 GiB (8.8%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: N/A uuid: 935dcefd-1c9d-4014-87f9-d41e413255e6 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B ID-3: /dev/sda4 size: 19.21 GiB fs: ext4 label: N/A uuid: f15f068b-1b2b-45ee-8b3a-3658533e0255 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.2% command: java pid: 580 mem: 200.7 MiB (5.0%) 2: cpu: 0.4% command: smartd pid: 2780 mem: 3.12 MiB (0.0%) 3: cpu: 0.3% command: packagekitd pid: 2544 mem: 12.6 MiB (0.3%) 4: cpu: 0.2% command: bash pid: 2354 mem: 2.78 MiB (0.0%) 5: cpu: 0.1% command: init pid: 1 mem: 8.14 MiB (0.2%) Memory top: 5 1: mem: 200.7 MiB (5.0%) command: java pid: 580 cpu: 1.2% 2: mem: 50.1 MiB (1.2%) command: mysqld pid: 830 cpu: 0.1% 3: mem: 43.4 MiB (1.0%) command: frontail started by: node pid: 581 cpu: 0.0% 4: mem: 16.0 MiB (0.4%) command: smbd pid: 777 cpu: 0.0% 5: mem: 15.3 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 578 cpu: 0.0% Info: Processes: 143 Uptime: 1h 01m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=abe4e5b2-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 422.2 MiB (10.6%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 130x60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: dormant mac:  
           WAN IP:  
Drives:    Local Storage: total: 126.25 GiB used: 9.69 GiB (7.7%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.46 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: UE5100RL temp: 48 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 7 hrs cycles: 23 read: 3 KiB 
           written: 11 KiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.20 GiB size: 13.95 GiB (98.28%) used: 2.92 GiB (20.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /mnt/backup raw size: 78.12 GiB size: 76.40 GiB (97.79%) used: 6.73 GiB (8.8%) 
           fs: ext4 block size: 4096 B dev: /dev/sda3 label: N/A 
           uuid: 935dcefd-1c9d-4014-87f9-d41e413255e6 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.20 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B 
           ID-3: /dev/sda4 size: 19.21 GiB fs: ext4 label: N/A 
           uuid: f15f068b-1b2b-45ee-8b3a-3658533e0255 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:1153 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.2% command: java pid: 580 mem: 200.7 MiB (5.0%) 
           2: cpu: 0.4% command: smartd pid: 2780 mem: 3.12 MiB (0.0%) 
           3: cpu: 0.3% command: packagekitd pid: 2544 mem: 12.6 MiB (0.3%) 
           4: cpu: 0.2% command: bash pid: 2354 mem: 2.78 MiB (0.0%) 
           5: cpu: 0.1% command: init pid: 1 mem: 8.14 MiB (0.2%) 
           Memory top: 5 
           1: mem: 200.7 MiB (5.0%) command: java pid: 580 cpu: 1.2% 
           2: mem: 50.1 MiB (1.2%) command: mysqld pid: 830 cpu: 0.1% 
           3: mem: 43.4 MiB (1.0%) command: frontail started by: node pid: 581 cpu: 0.0% 
           4: mem: 16.0 MiB (0.4%) command: smbd pid: 777 cpu: 0.0% 
           5: mem: 15.3 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 578 cpu: 0.0% 
Info:      Processes: 143 Uptime: 1h 01m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23643 - Brand: SanDisk SSD Plus