Benchmark #23707 - pibenchmarks.com

Brand: Steelram FS200 USB pSSD
SSD (Portable)
#329 / 1,665
33
#1,395 / 1,665
#972 / 977
#140 / 144
1,014
	AliExpress

Overview
2020-05-08 13:51:03
#23,707
904
-110 (-12.17%)
Anonymous
A1

Storage Details
Steelram FS200 USB pSSD
SSD (Portable)
58.8G
SSD
Steelram
SteelRamA01
3.10
5,000
7788:0a01
0x7788
0x0a01 (USB Headset)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
17.8 MB/s
55.82 MB/s
80.68 MB/s
46 IOPS
2,041 IOPS
187 KB/s
8,165 KB/s
19,580 KB/s
1,156 KB/s
9,316 KB/s
639 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 2 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 528.0 MiB (13.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 210x57 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth00cc584 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth1f5205c state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth275f935 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth374408d state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth6aeaaa1 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth9c23018 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth9ed5f68 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethc47cacc state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethfc5fa6e state: up speed: 10000 Mbps duplex: full mac: WAN IP: Drives: Local Storage: total: 88.72 GiB used: 21.01 GiB (23.7%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.75 GiB size: 57.57 GiB (98.00%) used: 10.48 GiB (18.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 919da716-a750-40a5-ad8d-f44c442f0153 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /var/lib/docker/overlay2/1716277594b29fec4175ff54e35bff918eb7df05b26266bb254113507d0e8c99/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/5b91da211b76be559179decb67291c75ede41248e0024c03e70a3151a2370362/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/761d82a59ef9afca67da7a588fa1f294f2f1161afd48923607aebbc348a38631/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/7a054d9453258d7090e66ad2f4e4618392723607b7c3d2a2b733f830d9440234/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/b58261eb95d38f823f4e298c1ad8f2c6f69ffd363aa29be8e9c4ad791e42889d/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/c06c03fe72d4a7f1c4428390bcb843bb9ed68995f0b6549627f0436cb44c6cc6/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/c327611be1b917b807bc96a80a335c39821b23d42340af71847b2732b40d7fa7/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/e9cab1c7985ef4c0dd194bded7dad272dbe8d148d0fed0372a8b6e897651c11e/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/eae008ed22e5a513c07051414e89d5a54042a90e487155925615bd93fc22a045/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-12: /var/lib/docker/overlay2/fed9349832f2c217d53e66461f5a63f1aa01ffdf7b34789650547a2881af5599/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.1:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Hub: 1-1.4:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Device-1: 1-1.4.2:8 info: Dresden Elektronik type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1cf1:0030 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-1:2 info: Genesys Logic ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 05e3:0626 Device-2: 2-1.4:3 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 7788:0a01 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/deconz.list 1: deb http: //phoscon.de/apt/deconz buster main Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x buster main 2: deb-src https: //deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.6% command: docker-containerd pid: 692 mem: 25.2 MiB (0.6%) 2: cpu: 3.9% command: deconz pid: 4303 mem: 46.9 MiB (1.2%) 3: cpu: 3.3% command: dockerd pid: 605 mem: 69.0 MiB (1.7%) 4: cpu: 2.3% command: docker pid: 2058 mem: 40.4 MiB (1.0%) 5: cpu: 2.2% command: python3 pid: 6084 mem: 25.3 MiB (0.6%) Memory top: 5 1: mem: 69.0 MiB (1.7%) command: dockerd pid: 605 cpu: 3.3% 2: mem: 46.9 MiB (1.2%) command: deconz pid: 4303 cpu: 3.9% 3: mem: 40.4 MiB (1.0%) command: docker pid: 2058 cpu: 2.3% 4: mem: 38.6 MiB (0.9%) command: docker pid: 1535 cpu: 0.0% 5: mem: 37.7 MiB (0.9%) command: python3 pid: 1925 cpu: 1.2% Info: Processes: 215 Uptime: 6m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 2 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 528.0 MiB (13.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 210x57 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth00cc584 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth1f5205c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth275f935 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth374408d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth6aeaaa1 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: veth9c23018 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: veth9ed5f68 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: vethc47cacc state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: vethfc5fa6e state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Drives:    Local Storage: total: 88.72 GiB used: 21.01 GiB (23.7%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: SteelRam A01 size: 59.00 GiB 
           block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.75 GiB size: 57.57 GiB (98.00%) used: 10.48 GiB (18.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 919da716-a750-40a5-ad8d-f44c442f0153 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /var/lib/docker/overlay2/1716277594b29fec4175ff54e35bff918eb7df05b26266bb254113507d0e8c99/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/5b91da211b76be559179decb67291c75ede41248e0024c03e70a3151a2370362/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/761d82a59ef9afca67da7a588fa1f294f2f1161afd48923607aebbc348a38631/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/7a054d9453258d7090e66ad2f4e4618392723607b7c3d2a2b733f830d9440234/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/b58261eb95d38f823f4e298c1ad8f2c6f69ffd363aa29be8e9c4ad791e42889d/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/c06c03fe72d4a7f1c4428390bcb843bb9ed68995f0b6549627f0436cb44c6cc6/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/c327611be1b917b807bc96a80a335c39821b23d42340af71847b2732b40d7fa7/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/e9cab1c7985ef4c0dd194bded7dad272dbe8d148d0fed0372a8b6e897651c11e/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/eae008ed22e5a513c07051414e89d5a54042a90e487155925615bd93fc22a045/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-12: /var/lib/docker/overlay2/fed9349832f2c217d53e66461f5a63f1aa01ffdf7b34789650547a2881af5599/merged raw size: N/A size: 57.57 GiB used: 10.48 GiB (18.2%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.1:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Hub: 1-1.4:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 
           Device-1: 1-1.4.2:8 info: Dresden Elektronik type: Abstract (modem),CDC-Data 
           driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 1cf1:0030 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-1:2 info: Genesys Logic ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 05e3:0626 
           Device-2: 2-1.4:3 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.2 speed: 5 Gb/s chip ID: 7788:0a01 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/deconz.list 
           1: deb http: //phoscon.de/apt/deconz buster main
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x buster main
           2: deb-src https: //deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.6% command: docker-containerd pid: 692 mem: 25.2 MiB (0.6%) 
           2: cpu: 3.9% command: deconz pid: 4303 mem: 46.9 MiB (1.2%) 
           3: cpu: 3.3% command: dockerd pid: 605 mem: 69.0 MiB (1.7%) 
           4: cpu: 2.3% command: docker pid: 2058 mem: 40.4 MiB (1.0%) 
           5: cpu: 2.2% command: python3 pid: 6084 mem: 25.3 MiB (0.6%) 
           Memory top: 5 
           1: mem: 69.0 MiB (1.7%) command: dockerd pid: 605 cpu: 3.3% 
           2: mem: 46.9 MiB (1.2%) command: deconz pid: 4303 cpu: 3.9% 
           3: mem: 40.4 MiB (1.0%) command: docker pid: 2058 cpu: 2.3% 
           4: mem: 38.6 MiB (0.9%) command: docker pid: 1535 cpu: 0.0% 
           5: mem: 37.7 MiB (0.9%) command: python3 pid: 1925 cpu: 1.2% 
Info:      Processes: 215 Uptime: 6m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23707 - Brand: Steelram FS200 USB pSSD