Benchmark #23767 - pibenchmarks.com

Brand: SanDisk X300 mSATA
SSD (mSATA)
#1,151 / 1,675
2
#758 / 1,675
#732 / 984
#31 / 69
5,658
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2020-05-09 03:09:30
#23,767
8,790
+3,132 (+35.63%)
Anonymous
Msata on PRC Msata to usb 3.0

Storage Details
SanDisk X300 mSATA
SSD (mSATA)
256G
SSD
SanDisk
X300MSATA256GB
mSATA
SATA
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
195 MB/s
297.82 MB/s
234.69 MB/s
11,709 IOPS
22,045 IOPS
46,838 KB/s
88,180 KB/s
31,069 KB/s
31,789 KB/s
19,978 KB/s
33,137 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait ipv6.disable=1 Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 253.0 MiB (6.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 167x19 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: WAN IP: Drives: Local Storage: total: 242.22 GiB used: 1.56 GiB (0.6%) ID-1: /dev/mmcblk0 model: SD04G size: 3.75 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: X300 MSATA 256GB size: 238.47 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: X3520012 scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 267d 19h cycles: 932 read: 3.62 TiB written: 4.85 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 234.52 GiB (98.45%) used: 1.51 GiB (0.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /data raw size: N/A size: 2.68 TiB used: 1.23 TiB (45.8%) fs: nfs remote: 192.168.X.X:/nfs/raspipi/server5 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 1.47 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb https: //download.webmin.com/download/repository sarge contrib Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.9% command: init pid: 1 mem: 7.70 MiB (0.1%) 2: cpu: 1.1% command: [kworker/2:1-pm] pid: 57 mem: 0.00 MiB (0.0%) 3: cpu: 0.6% command: systemd-journald pid: 121 mem: 6.89 MiB (0.1%) 4: cpu: 0.5% command: openvpn pid: 519 mem: 5.70 MiB (0.1%) 5: cpu: 0.5% command: sshd: pid: 634 mem: 6.15 MiB (0.1%) Memory top: 5 1: mem: 49.8 MiB (1.2%) command: rpc.statd pid: 545 cpu: 0.1% 2: mem: 18.5 MiB (0.4%) command: miniserv.pl started by: perl pid: 580 cpu: 0.0% 3: mem: 7.70 MiB (0.1%) command: init pid: 1 cpu: 2.9% 4: mem: 6.89 MiB (0.1%) command: systemd-journald pid: 121 cpu: 0.6% 5: mem: 6.45 MiB (0.1%) command: systemd pid: 641 cpu: 0.4% Info: Processes: 112 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait ipv6.disable=1 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 253.0 MiB (6.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 167x19 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 242.22 GiB used: 1.56 GiB (0.6%) 
           ID-1: /dev/mmcblk0 model: SD04G size: 3.75 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: X300 MSATA 256GB size: 238.47 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: X3520012 scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 267d 19h cycles: 932 read: 3.62 TiB 
           written: 4.85 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 234.52 GiB (98.45%) used: 1.51 GiB (0.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /data raw size: N/A size: 2.68 TiB used: 1.23 TiB (45.8%) fs: nfs 
           remote: 192.168.X.X:/nfs/raspipi/server5 label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 1.47 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb https: //download.webmin.com/download/repository sarge contrib
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.9% command: init pid: 1 mem: 7.70 MiB (0.1%) 
           2: cpu: 1.1% command: [kworker/2:1-pm] pid: 57 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.6% command: systemd-journald pid: 121 mem: 6.89 MiB (0.1%) 
           4: cpu: 0.5% command: openvpn pid: 519 mem: 5.70 MiB (0.1%) 
           5: cpu: 0.5% command: sshd: pid: 634 mem: 6.15 MiB (0.1%) 
           Memory top: 5 
           1: mem: 49.8 MiB (1.2%) command: rpc.statd pid: 545 cpu: 0.1% 
           2: mem: 18.5 MiB (0.4%) command: miniserv.pl started by: perl pid: 580 cpu: 0.0% 
           3: mem: 7.70 MiB (0.1%) command: init pid: 1 cpu: 2.9% 
           4: mem: 6.89 MiB (0.1%) command: systemd-journald pid: 121 cpu: 0.6% 
           5: mem: 6.45 MiB (0.1%) command: systemd pid: 641 cpu: 0.4% 
Info:      Processes: 112 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23767 - Brand: SanDisk X300 mSATA