Benchmark #23823 - pibenchmarks.com

Brand: Toshiba THCSNJ M.2 Series
SSD (M.2 SATA)
#699 / 1,679
9
#643 / 1,679
#620 / 984
#74 / 115
6,252
	Amazon.com Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.sg

Overview
2020-05-09 12:49:22
#23,823
6,895
+643 (+9.33%)
Anonymous
ssdm2

Storage Details
Toshiba THCSNJ M.2 Series
SSD (M.2 SATA)
256G
SSD
Toshiba
THNSNJ256G8NY
less than 1.8 inch
SATA
3.10
5,000
1d6b:0576
0x1d6b (Linux Foundation)
0x0576
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
82.2 MB/s
287.34 MB/s
284.67 MB/s
7,681 IOPS
22,285 IOPS
30,727 KB/s
89,140 KB/s
30,997 KB/s
25,851 KB/s
15,988 KB/s
31,882 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b07ffe50-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 303.5 MiB (7.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") s-diag: 338mm (13.3") Monitor-1: HDMI-1 res: 1024x768 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 268.20 GiB used: 12.73 GiB (4.7%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 238.47 GiB block size: physical: 4096 B logical: 512 B rev: 1507 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 6.36 GiB (2.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.95 GiB (98.23%) used: 6.27 GiB (21.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:0576 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.9% command: xorg pid: 483 mem: 50.9 MiB (1.3%) 2: cpu: 1.9% command: lxterminal pid: 894 mem: 28.8 MiB (0.7%) 3: cpu: 1.6% command: vncserver-x11-core pid: 442 mem: 17.8 MiB (0.4%) 4: cpu: 1.5% command: init pid: 1 mem: 8.04 MiB (0.2%) 5: cpu: 0.7% command: pcmanfm pid: 615 mem: 27.8 MiB (0.7%) Memory top: 5 1: mem: 50.9 MiB (1.3%) command: xorg pid: 483 cpu: 2.9% 2: mem: 28.8 MiB (0.7%) command: lxterminal pid: 894 cpu: 1.9% 3: mem: 28.3 MiB (0.7%) command: lxpanel pid: 612 cpu: 0.3% 4: mem: 27.8 MiB (0.7%) command: pcmanfm pid: 615 cpu: 0.7% 5: mem: 17.8 MiB (0.4%) command: vncserver-x11-core pid: 442 cpu: 1.6% Info: Processes: 160 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b07ffe50-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 303.5 MiB (7.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") 
           s-diag: 338mm (13.3") 
           Monitor-1: HDMI-1 res: 1024x768 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 268.20 GiB used: 12.73 GiB (4.7%) 
           ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 238.47 GiB 
           block size: physical: 4096 B logical: 512 B rev: 1507 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 6.36 GiB (2.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot 
           uuid: 9969-E3D2 
           ID-4: /media/pi/rootfs raw size: 29.47 GiB size: 28.95 GiB (98.23%) 
           used: 6.27 GiB (21.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 152d:0576 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.9% command: xorg pid: 483 mem: 50.9 MiB (1.3%) 
           2: cpu: 1.9% command: lxterminal pid: 894 mem: 28.8 MiB (0.7%) 
           3: cpu: 1.6% command: vncserver-x11-core pid: 442 mem: 17.8 MiB (0.4%) 
           4: cpu: 1.5% command: init pid: 1 mem: 8.04 MiB (0.2%) 
           5: cpu: 0.7% command: pcmanfm pid: 615 mem: 27.8 MiB (0.7%) 
           Memory top: 5 
           1: mem: 50.9 MiB (1.3%) command: xorg pid: 483 cpu: 2.9% 
           2: mem: 28.8 MiB (0.7%) command: lxterminal pid: 894 cpu: 1.9% 
           3: mem: 28.3 MiB (0.7%) command: lxpanel pid: 612 cpu: 0.3% 
           4: mem: 27.8 MiB (0.7%) command: pcmanfm pid: 615 cpu: 0.7% 
           5: mem: 17.8 MiB (0.4%) command: vncserver-x11-core pid: 442 cpu: 1.6% 
Info:      Processes: 160 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23823 - Brand: Toshiba THCSNJ M.2 Series