Benchmark #23889 - pibenchmarks.com

Brand: SanDisk Ultra 3D NAND
SSD (2.5" SATA)
#160 / 1,679
108
#568 / 1,679
#547 / 984
#113 / 370
6,667
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-10 05:51:16
#23,889
6,078
-589 (-9.69%)
Anonymous

Storage Details
SanDisk Ultra 3D NAND
SSD (2.5" SATA)
250G
SSD
SanDisk
SDSSDH3250G
2.5 inch
SATA
3.00
5,000
152d:3562
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x3562
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
187 MB/s
197.1 MB/s
186.59 MB/s
6,157 IOPS
4,578 IOPS
24,630 KB/s
18,314 KB/s
24,040 KB/s
19,622 KB/s
16,487 KB/s
22,688 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:3562:u console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles plymouth.enable=0 Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 434.2 MiB (10.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 38 size: 1280x720mm (50.4x28.3") diag: 1469mm (57.8") OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 247.82 GiB used: 68.21 GiB (27.5%) ID-1: /dev/mmcblk0 model: N/A size: 14.93 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: ADplus SuperVer drive model: SDSSDH3 250G size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: 6302 drive rev: 401120RL temp: 41 C scheme: MBR SMART: yes state: enabled health: PASSED on: 6d 23h cycles: 104 read: 571 KiB written: 78 KiB Old-Age: media wearout: 100 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.63 GiB size: 228.85 GiB (98.38%) used: 64.72 GiB (28.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /home//NAS raw size: N/A size: 5.41 TiB used: 3.45 TiB (63.9%) fs: cifs remote: //olsv01.fritz.box/homes/pi label: N/A uuid: N/A ID-4: /media/pi/rootfs2 raw size: 14.68 GiB size: 14.32 GiB (97.57%) used: 3.38 GiB (23.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-5: /media/usb0 raw size: 232.63 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ext4 dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-6: /media/usb1 raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 300.0 MiB used: 15.0 MiB (5.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:3562 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/pipplware.list 1: deb http: //pipplware.pplware.pt/pipplware/dists/buster/main/binary/ ./ Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 1.1% command: packagekitd pid: 26623 mem: 12.8 MiB (0.3%) 2: cpu: 1.0% command: avahi-daemon: pid: 417 mem: 3.65 MiB (0.0%) 3: cpu: 0.3% command: rpimonitord started by: perl pid: 1012 mem: 8.99 MiB (0.2%) 4: cpu: 0.3% command: lxterminal pid: 14982 mem: 27.7 MiB (0.7%) 5: cpu: 0.3% command: bash pid: 26370 mem: 2.77 MiB (0.0%) Memory top: 5 1: mem: 53.0 MiB (1.3%) command: xorg pid: 942 cpu: 0.2% 2: mem: 32.0 MiB (0.8%) command: vncserver-x11-core pid: 718 cpu: 0.1% 3: mem: 29.3 MiB (0.7%) command: lxpanel pid: 1200 cpu: 0.0% 4: mem: 27.7 MiB (0.7%) command: lxterminal pid: 14982 cpu: 0.3% 5: mem: 24.9 MiB (0.6%) command: pcmanfm pid: 1202 cpu: 0.0% Info: Processes: 168 Uptime: 1d 21h 12m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152d:3562:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles plymouth.enable=0 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 434.2 MiB (10.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 38 size: 1280x720mm (50.4x28.3") 
           diag: 1469mm (57.8") 
           OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 247.82 GiB used: 68.21 GiB (27.5%) 
           ID-1: /dev/mmcblk0 model: N/A size: 14.93 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: ADplus SuperVer drive model: SDSSDH3 250G 
           size: 232.89 GiB block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s 
           rev: 6302 drive rev: 401120RL temp: 41 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 6d 23h cycles: 104 read: 571 KiB 
           written: 78 KiB Old-Age: media wearout: 100 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.63 GiB size: 228.85 GiB (98.38%) used: 64.72 GiB (28.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
           ID-3: /home//NAS raw size: N/A size: 5.41 TiB used: 3.45 TiB (63.9%) fs: cifs 
           remote: //olsv01.fritz.box/homes/pi label: N/A uuid: N/A 
           ID-4: /media/pi/rootfs2 raw size: 14.68 GiB size: 14.32 GiB (97.57%) 
           used: 3.38 GiB (23.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-5: /media/usb0 raw size: 232.63 GiB size: N/A (hidden?) used: N/A (hidden?) fs: ext4 
           dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-6: /media/usb1 raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 300.0 MiB used: 15.0 MiB (5.0%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:3562 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/pipplware.list 
           1: deb http: //pipplware.pplware.pt/pipplware/dists/buster/main/binary/ ./
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 1.1% command: packagekitd pid: 26623 mem: 12.8 MiB (0.3%) 
           2: cpu: 1.0% command: avahi-daemon: pid: 417 mem: 3.65 MiB (0.0%) 
           3: cpu: 0.3% command: rpimonitord started by: perl pid: 1012 mem: 8.99 MiB (0.2%) 
           4: cpu: 0.3% command: lxterminal pid: 14982 mem: 27.7 MiB (0.7%) 
           5: cpu: 0.3% command: bash pid: 26370 mem: 2.77 MiB (0.0%) 
           Memory top: 5 
           1: mem: 53.0 MiB (1.3%) command: xorg pid: 942 cpu: 0.2% 
           2: mem: 32.0 MiB (0.8%) command: vncserver-x11-core pid: 718 cpu: 0.1% 
           3: mem: 29.3 MiB (0.7%) command: lxpanel pid: 1200 cpu: 0.0% 
           4: mem: 27.7 MiB (0.7%) command: lxterminal pid: 14982 cpu: 0.3% 
           5: mem: 24.9 MiB (0.6%) command: pcmanfm pid: 1202 cpu: 0.0% 
Info:      Processes: 168 Uptime: 1d 21h 12m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.00

Benchmark #23889 - Brand: SanDisk Ultra 3D NAND