Benchmark #23926 - pibenchmarks.com

Brand: SanDisk SD Extreme Pro A1 (SM32G)
A1 C10 V30 U3
#44 / 1,701
390
#1,367 / 1,701
#227 / 405
1,139
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-10 13:46:57
#23,926
893
-246 (-27.55%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Extreme Pro A1 (SM32G)
A1 C10 V30 U3
7.8G
SD
SanDisk
SM32G
SDHC
6.00
0x03
SD
8.0
09/2018
Class 10
A1
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
2,000 (+500)
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29.3 MB/s
36.11 MB/s
34.88 MB/s
364 IOPS
2,219 IOPS
1,456 KB/s
8,878 KB/s
7,829 KB/s
1,276 KB/s
6,125 KB/s
1,354 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 520.3 MiB (13.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1440 Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link IF-ID-3: wlan0 state: up mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 29.72 GiB used: 3.69 GiB (12.4%) ID-1: /dev/mmcblk0 vendor: Silicon Motion model: SM32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.75 GiB size: 7.60 GiB (98.10%) used: 3.64 GiB (47.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B Swap: Kernel: swappiness: 1 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: zram size: 51.0 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0 ID-2: swap-2 type: zram size: 51.0 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram1 ID-3: swap-3 type: zram size: 51.0 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram2 ID-4: swap-4 type: zram size: 51.0 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram3 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Hub: 1-1.4.3:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Device-1: 1-1.4.X.X:6 info: Huawei E161/E169/E620/E800 HSDPA Modem type: driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s chip ID: 12d1:1001 Device-2: 1-1.4.X.X:8 info: Huawei E161/E169/E620/E800 HSDPA Modem type: driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s chip ID: 12d1:1001 Device-3: 1-1.4.X.X:10 info: Huawei E161/E169/E620/E800 HSDPA Modem type: driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s chip ID: 12d1:1001 Hub: 1-1.4.4:5 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Device-4: 1-1.4.X.X:7 info: Huawei E161/E169/E620/E800 HSDPA Modem type: driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s chip ID: 12d1:1001 Device-5: 1-1.4.X.X:9 info: Huawei E161/E169/E620/E800 HSDPA Modem type: driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s chip ID: 12d1:1001 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/php.list 1: deb https: //packages.sury.org/php/ buster main Active apt repos in: /etc/apt/sources.list.d/raspbx.list 1: deb http: //repo.raspbx.org/apt/debian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 0.7% command: asterisk pid: 1540 mem: 52.4 MiB (1.3%) 2: cpu: 0.6% command: apache2 pid: 937 mem: 28.6 MiB (0.7%) 3: cpu: 0.4% command: [kworker/u8:3-events_unbound] pid: 12301 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: init pid: 1 mem: 8.27 MiB (0.2%) 5: cpu: 0.3% command: mysqld pid: 887 mem: 88.3 MiB (2.2%) Memory top: 5 1: mem: 88.3 MiB (2.2%) command: mysqld pid: 887 cpu: 0.3% 2: mem: 52.8 MiB (1.3%) command: index.js started by: node pid: 2148 cpu: 0.3% 3: mem: 52.4 MiB (1.3%) command: asterisk pid: 1540 cpu: 0.7% 4: mem: 44.3 MiB (1.1%) command: pm2 pid: 1698 cpu: 0.3% 5: mem: 34.9 MiB (0.8%) command: fastagi-server.js started by: node pid: 1838 cpu: 0.2% Info: Processes: 153 Uptime: 51m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 520.3 MiB (13.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1440 
           Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 
           4: 2000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 29.72 GiB used: 3.69 GiB (12.4%) 
           ID-1: /dev/mmcblk0 vendor: Silicon Motion model: SM32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.75 GiB size: 7.60 GiB (98.10%) used: 3.64 GiB (47.9%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
Swap:      Kernel: swappiness: 1 (default 60) cache pressure: 100 (default) 
           ID-1: swap-1 type: zram size: 51.0 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0 
           ID-2: swap-2 type: zram size: 51.0 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram1 
           ID-3: swap-3 type: zram size: 51.0 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram2 
           ID-4: swap-4 type: zram size: 51.0 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram3 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 
           Hub: 1-1.4.3:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 
           Device-1: 1-1.4.X.X:6 info: Huawei E161/E169/E620/E800 HSDPA Modem 
           type:  driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 12d1:1001 
           Device-2: 1-1.4.X.X:8 info: Huawei E161/E169/E620/E800 HSDPA Modem 
           type:  driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 12d1:1001 
           Device-3: 1-1.4.X.X:10 info: Huawei E161/E169/E620/E800 HSDPA Modem 
           type:  driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 12d1:1001 
           Hub: 1-1.4.4:5 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 
           Device-4: 1-1.4.X.X:7 info: Huawei E161/E169/E620/E800 HSDPA Modem 
           type:  driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 12d1:1001 
           Device-5: 1-1.4.X.X:9 info: Huawei E161/E169/E620/E800 HSDPA Modem 
           type:  driver: option,option1 interfaces: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 12d1:1001 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/php.list 
           1: deb https: //packages.sury.org/php/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspbx.list 
           1: deb http: //repo.raspbx.org/apt/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 0.7% command: asterisk pid: 1540 mem: 52.4 MiB (1.3%) 
           2: cpu: 0.6% command: apache2 pid: 937 mem: 28.6 MiB (0.7%) 
           3: cpu: 0.4% command: [kworker/u8:3-events_unbound] pid: 12301 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: init pid: 1 mem: 8.27 MiB (0.2%) 
           5: cpu: 0.3% command: mysqld pid: 887 mem: 88.3 MiB (2.2%) 
           Memory top: 5 
           1: mem: 88.3 MiB (2.2%) command: mysqld pid: 887 cpu: 0.3% 
           2: mem: 52.8 MiB (1.3%) command: index.js started by: node pid: 2148 cpu: 0.3% 
           3: mem: 52.4 MiB (1.3%) command: asterisk pid: 1540 cpu: 0.7% 
           4: mem: 44.3 MiB (1.1%) command: pm2 pid: 1698 cpu: 0.3% 
           5: mem: 34.9 MiB (0.8%) command: fastagi-server.js started by: node pid: 1838 cpu: 0.2% 
Info:      Processes: 153 Uptime: 51m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23926 - Brand: SanDisk SD Extreme Pro A1 (SM32G)