Benchmark #24041 - pibenchmarks.com

Brand: SanDisk SD Extreme (SU04G)
C2
#483 / 1,672
18
#1,588 / 1,672
#374 / 389
418
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-11 14:30:26
#24,041
109
-309 (-283.49%)
dasza77

Secure Digital (SD) Card Details
SanDisk SD Extreme (SU04G)
C2
3.4G
SD
SanDisk
SDHC
3.00
0x03
SD
8.0
02/2010
Class 2
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
2.6 MB/s
9.44 MB/s
8.19 MB/s
41 IOPS
226 IOPS
167 KB/s
904 KB/s
973 KB/s
1,329 KB/s
826 KB/s
195 KB/s

inxi Results
System: Host: DietPi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 323.5 MiB (8.1%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: N/A driver: N/A note: display driver n/a alternate: fbturbo tty: 117x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fe80::dea6:32ff:fe9c:ef44/64 scope: link IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v6: fe80::dea6:32ff:fe9c:ef45/64 scope: link WAN IP: 83.26.X.X Drives: Local Storage: total: 5.46 TiB used: 3.76 TiB (68.9%) ID-1: /dev/mmcblk0 model: SU04G size: 3.69 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: Backup+ Hub BK size: 5.46 TiB block size: physical: 4096 B logical: 512 B rev: D781 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 3.44 GiB size: 3.35 GiB (97.56%) used: 2.38 GiB (71.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /mnt/94BA918FBA916F0C raw size: 5.46 TiB size: 5.46 TiB (100.00%) used: 3.76 TiB (68.9%) fs: ntfs block size: 4096 B dev: /dev/sda2 label: Seagate Backup Plus Drive uuid: 94BA918FBA916F0C Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: requires file label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-2:2 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 Device-1: 2-2.1:3 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https://archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 37.4% command: syncthing pid: 876 mem: 111.7 MiB (2.8%) 2: cpu: 32.2% command: sda2 started by: mount.ntfs pid: 322 mem: 22.0 MiB (0.5%) 3: cpu: 7.3% command: smbd pid: 824 mem: 14.9 MiB (0.3%) 4: cpu: 2.3% command: smbd pid: 944 mem: 15.2 MiB (0.3%) 5: cpu: 1.7% command: smbd pid: 864 mem: 14.8 MiB (0.3%) Memory top: 5 1: mem: 111.7 MiB (2.8%) command: syncthing pid: 876 cpu: 37.4% 2: mem: 22.0 MiB (0.5%) command: sda2 started by: mount.ntfs pid: 322 cpu: 32.2% 3: mem: 15.6 MiB (0.3%) command: smbd pid: 820 cpu: 0.0% 4: mem: 15.2 MiB (0.3%) command: smbd pid: 944 cpu: 2.3% 5: mem: 14.9 MiB (0.3%) command: smbd pid: 824 cpu: 7.3% Info: Processes: 125 Uptime: 16m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 inxi: 3.1.00

inxi Results

System:    Host: DietPi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 
           console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 
           fbcon=font:ProFont6x11 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory:    RAM: total: 3.88 GiB used: 323.5 MiB (8.1%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 
           model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: N/A driver: N/A note: display driver n/a alternate: fbturbo tty: 117x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X 
           IP v6: fe80::dea6:32ff:fe9c:ef44/64 scope: link 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v6: fe80::dea6:32ff:fe9c:ef45/64 scope: link 
           WAN IP: 83.26.X.X 
Drives:    Local Storage: total: 5.46 TiB used: 3.76 TiB (68.9%) 
           ID-1: /dev/mmcblk0 model: SU04G size: 3.69 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: Backup+ Hub BK size: 5.46 TiB block size: 
           physical: 4096 B logical: 512 B rev: D781 scheme: GPT 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 3.44 GiB size: 3.35 GiB (97.56%) used: 2.38 GiB (71.1%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /mnt/94BA918FBA916F0C raw size: 5.46 TiB size: 5.46 TiB (100.00%) used: 3.76 TiB (68.9%) 
           fs: ntfs block size: 4096 B dev: /dev/sda2 label: Seagate Backup Plus Drive uuid: 94BA918FBA916F0C 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: requires file label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Hub: 2-2:2 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 
           Device-1: 2-2.1:3 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage driver: uas interfaces: 1 
           rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https://archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 37.4% command: syncthing pid: 876 mem: 111.7 MiB (2.8%) 
           2: cpu: 32.2% command: sda2 started by: mount.ntfs pid: 322 mem: 22.0 MiB (0.5%) 
           3: cpu: 7.3% command: smbd pid: 824 mem: 14.9 MiB (0.3%) 
           4: cpu: 2.3% command: smbd pid: 944 mem: 15.2 MiB (0.3%) 
           5: cpu: 1.7% command: smbd pid: 864 mem: 14.8 MiB (0.3%) 
           Memory top: 5 
           1: mem: 111.7 MiB (2.8%) command: syncthing pid: 876 cpu: 37.4% 
           2: mem: 22.0 MiB (0.5%) command: sda2 started by: mount.ntfs pid: 322 cpu: 32.2% 
           3: mem: 15.6 MiB (0.3%) command: smbd pid: 820 cpu: 0.0% 
           4: mem: 15.2 MiB (0.3%) command: smbd pid: 944 cpu: 2.3% 
           5: mem: 14.9 MiB (0.3%) command: smbd pid: 824 cpu: 7.3% 
Info:      Processes: 125 Uptime: 16m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash 
           v: 5.0.3 inxi: 3.1.00