Benchmark #24060 - pibenchmarks.com

Brand: Samsung 840 Pro
SSD (2.5" SATA)
#123 / 1,700
153
#670 / 1,700
#645 / 989
#169 / 370
6,180
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-11 21:31:51
#24,060
8,345
+2,165 (+25.94%)
Anonymous

Storage Details
Samsung 840 Pro
SSD (2.5" SATA)
256G
SSD
Samsung
SSD840PROSeries
SATA
3.00
5,000
2109:0715
0x2109
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
193 MB/s
320.58 MB/s
283.48 MB/s
8,819 IOPS
16,075 IOPS
35,279 KB/s
64,301 KB/s
36,192 KB/s
26,263 KB/s
21,701 KB/s
33,519 KB/s

inxi Results
System: Host: pi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 753.5 MiB (19.0%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 161x54 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2403:5800:9102:3a00::54b/128 type: dynamic noprefixroute scope: global IP v6: 2403:5800:9102:3a00:df8:797e:6472:7a41/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::b446:1213:a8e0:8f40/64 scope: link WAN IP: 117.20.X.X Drives: Local Storage: total: 253.31 GiB used: 155.49 GiB (61.4%) ID-1: /dev/mmcblk0 model: SU16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: SSD 840 PRO size: 238.47 GiB block size: physical: 512 B logical: 512 B rev: DXM0 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 32.00 GiB size: 31.25 GiB (97.65%) used: 2.44 GiB (7.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: root uuid: ce47de06-7751-41de-9e99-ed7ca815b2a6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.4 MiB (21.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /data raw size: 200.00 GiB size: 195.86 GiB (97.93%) used: 153.00 GiB (78.1%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: data uuid: 2cd4ad5a-297d-4826-ad51-1767a096830a Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0715 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/golift.list 1: deb https://dl.bintray.com/golift/debian buster main Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https://repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/ntop.list 1: deb http://apt.ntop.org/buster_pi armhf/ 2: deb http://apt.ntop.org/buster_pi all/ Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/speedtest.list 1: deb https://ookla.bintray.com/debian buster main Processes: CPU top: 5 1: cpu: 113% command: ntopng.conf started by: ntopng pid: 616 mem: 181.3 MiB (4.5%) 2: cpu: 52.3% command: influxd pid: 485 mem: 368.4 MiB (9.3%) 3: cpu: 5.4% command: init pid: 1 mem: 7.91 MiB (0.1%) 4: cpu: 2.7% command: python.d.plugin started by: python3 pid: 648 mem: 16.8 MiB (0.4%) 5: cpu: 2.1% command: netdata pid: 559 mem: 32.1 MiB (0.8%) Memory top: 5 1: mem: 368.4 MiB (9.3%) command: influxd pid: 485 cpu: 52.3% 2: mem: 181.3 MiB (4.5%) command: ntopng.conf started by: ntopng pid: 616 cpu: 113% 3: mem: 42.4 MiB (1.0%) command: telegraf pid: 493 cpu: 1.0% 4: mem: 33.2 MiB (0.8%) command: grafana-server pid: 477 cpu: 0.9% 5: mem: 32.1 MiB (0.8%) command: netdata pid: 559 cpu: 2.1% Info: Processes: 136 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: storage.sh (sudo) inxi: 3.1.00

inxi Results

System:    Host: pi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes 
           rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
Memory:    RAM: total: 3.88 GiB used: 753.5 MiB (19.0%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 161x54 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: 2403:5800:9102:3a00::54b/128 type: dynamic noprefixroute scope: global 
           IP v6: 2403:5800:9102:3a00:df8:797e:6472:7a41/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::b446:1213:a8e0:8f40/64 scope: link 
           WAN IP: 117.20.X.X 
Drives:    Local Storage: total: 253.31 GiB used: 155.49 GiB (61.4%) 
           ID-1: /dev/mmcblk0 model: SU16G size: 14.84 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 840 PRO size: 238.47 GiB block size: physical: 512 B 
           logical: 512 B rev: DXM0 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 32.00 GiB size: 31.25 GiB (97.65%) used: 2.44 GiB (7.8%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: root uuid: ce47de06-7751-41de-9e99-ed7ca815b2a6 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.4 MiB (21.2%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /data raw size: 200.00 GiB size: 195.86 GiB (97.93%) used: 153.00 GiB (78.1%) fs: ext4 block size: 4096 B 
           dev: /dev/sda3 label: data uuid: 2cd4ad5a-297d-4826-ad51-1767a096830a 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 2109:0715 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/golift.list 
           1: deb https://dl.bintray.com/golift/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https://repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/ntop.list 
           1: deb http://apt.ntop.org/buster_pi armhf/
           2: deb http://apt.ntop.org/buster_pi all/
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/speedtest.list 
           1: deb https://ookla.bintray.com/debian buster main
Processes: CPU top: 5 
           1: cpu: 113% command: ntopng.conf started by: ntopng pid: 616 mem: 181.3 MiB (4.5%) 
           2: cpu: 52.3% command: influxd pid: 485 mem: 368.4 MiB (9.3%) 
           3: cpu: 5.4% command: init pid: 1 mem: 7.91 MiB (0.1%) 
           4: cpu: 2.7% command: python.d.plugin started by: python3 pid: 648 mem: 16.8 MiB (0.4%) 
           5: cpu: 2.1% command: netdata pid: 559 mem: 32.1 MiB (0.8%) 
           Memory top: 5 
           1: mem: 368.4 MiB (9.3%) command: influxd pid: 485 cpu: 52.3% 
           2: mem: 181.3 MiB (4.5%) command: ntopng.conf started by: ntopng pid: 616 cpu: 113% 
           3: mem: 42.4 MiB (1.0%) command: telegraf pid: 493 cpu: 1.0% 
           4: mem: 33.2 MiB (0.8%) command: grafana-server pid: 477 cpu: 0.9% 
           5: mem: 32.1 MiB (0.8%) command: netdata pid: 559 cpu: 2.1% 
Info:      Processes: 136 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: storage.sh (sudo) 
           inxi: 3.1.00

Benchmark #24060 - Brand: Samsung 840 Pro