Benchmark #24069 - pibenchmarks.com

Brand: Seagate BarraCuda Compute HDD
HDD (3.5" SATA)
#257 / 1,679
62
#1,109 / 1,679
#28 / 69
#12 / 30
1,817
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-11 23:45:40
#24,069
7,153
+5,336 (+74.60%)
dasza77

Storage Details
Seagate BarraCuda Compute HDD
HDD (3.5" SATA)
5.5T
HDD
Seagate
ST6000DM003-2CY186
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
25 MB/s
1,800 IOPS
14,628 IOPS
7,201 KB/s
58,514 KB/s
72,988 KB/s
21,240 KB/s
71,050 KB/s
23,481 KB/s

inxi Results
System: Host: DietPi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 usb-storage.quirks=0bc2:ab38:u dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 154.4 MiB (3.9%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: N/A driver: N/A note: display driver n/a alternate: fbturbo tty: 103x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fe80::dea6:32ff:fe9c:ef44/64 scope: link IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fe80::dea6:32ff:fe9c:ef45/64 scope: link WAN IP: 83.26.X.X Drives: Local Storage: total: 5.46 TiB used: 3.77 TiB (69.1%) ID-1: /dev/mmcblk0 model: SU04G size: 3.69 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: ST6000DM003-2CY186 size: 5.46 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5425 rpm rev: D781 drive rev: 0001 temp: 51 C scheme: GPT SMART: yes state: enabled health: PASSED on: 125d 4h cycles: 90 read: 6.34 TiB written: 12.62 TiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 3.44 GiB size: 3.35 GiB (97.56%) used: 2.39 GiB (71.2%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /mnt/94BA918FBA916F0C raw size: 5.46 TiB size: 5.46 TiB (100.00%) used: 3.77 TiB (69.1%) fs: ntfs block size: 4096 B dev: /dev/sda2 label: Seagate Backup Plus Drive uuid: 94BA918FBA916F0C Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: requires file label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-2:2 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 Device-1: 2-2.1:3 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https://archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 6.3% command: sda2 started by: mount.ntfs pid: 324 mem: 7.55 MiB (0.1%) 2: cpu: 0.3% command: init pid: 1 mem: 7.94 MiB (0.2%) 3: cpu: 0.3% command: bash pid: 4014 mem: 2.79 MiB (0.0%) 4: cpu: 0.2% command: [usb-storage] pid: 83 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 2860 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 8.80 MiB (0.2%) command: systemd-journald pid: 119 cpu: 0.0% 2: mem: 7.94 MiB (0.2%) command: init pid: 1 cpu: 0.3% 3: mem: 7.55 MiB (0.1%) command: sda2 started by: mount.ntfs pid: 324 cpu: 6.3% 4: mem: 5.34 MiB (0.1%) command: systemd-logind pid: 302 cpu: 0.0% 5: mem: 4.73 MiB (0.1%) command: dhclient pid: 451 cpu: 0.0% Info: Processes: 108 Uptime: 31m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 inxi: 3.1.00

inxi Results

System:    Host: DietPi Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 
           usb-storage.quirks=0bc2:ab38:u dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 
           root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 
           fbcon=font:ProFont6x11 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory:    RAM: total: 3.88 GiB used: 154.4 MiB (3.9%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: N/A driver: N/A note: display driver n/a alternate: fbturbo tty: 103x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X 
           IP v6: fe80::dea6:32ff:fe9c:ef44/64 scope: link 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X 
           IP v6: fe80::dea6:32ff:fe9c:ef45/64 scope: link 
           WAN IP: 83.26.X.X 
Drives:    Local Storage: total: 5.46 TiB used: 3.77 TiB (69.1%) 
           ID-1: /dev/mmcblk0 model: SU04G size: 3.69 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: ST6000DM003-2CY186 size: 5.46 TiB 
           block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5425 rpm 
           rev: D781 drive rev: 0001 temp: 51 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 125d 4h cycles: 90 read: 6.34 TiB 
           written: 12.62 TiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 
           threshold: 97 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 3.44 GiB size: 3.35 GiB (97.56%) used: 2.39 GiB (71.2%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /mnt/94BA918FBA916F0C raw size: 5.46 TiB size: 5.46 TiB (100.00%) 
           used: 3.77 TiB (69.1%) fs: ntfs block size: 4096 B dev: /dev/sda2 
           label: Seagate Backup Plus Drive uuid: 94BA918FBA916F0C 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/sda1 size: 128.0 MiB fs: requires file label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-2:2 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 
           Device-1: 2-2.1:3 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https://archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 6.3% command: sda2 started by: mount.ntfs pid: 324 mem: 7.55 MiB (0.1%) 
           2: cpu: 0.3% command: init pid: 1 mem: 7.94 MiB (0.2%) 
           3: cpu: 0.3% command: bash pid: 4014 mem: 2.79 MiB (0.0%) 
           4: cpu: 0.2% command: [usb-storage] pid: 83 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 2860 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.80 MiB (0.2%) command: systemd-journald pid: 119 cpu: 0.0% 
           2: mem: 7.94 MiB (0.2%) command: init pid: 1 cpu: 0.3% 
           3: mem: 7.55 MiB (0.1%) command: sda2 started by: mount.ntfs pid: 324 cpu: 6.3% 
           4: mem: 5.34 MiB (0.1%) command: systemd-logind pid: 302 cpu: 0.0% 
           5: mem: 4.73 MiB (0.1%) command: dhclient pid: 451 cpu: 0.0% 
Info:      Processes: 108 Uptime: 31m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Shell: bash v: 5.0.3 inxi: 3.1.00

Benchmark #24069 - Brand: Seagate BarraCuda Compute HDD