Benchmark #24107 - pibenchmarks.com

Brand: Crucial BX500 Series
SSD (2.5" SATA)
#4 / 1,539
1,082
#488 / 1,539
#468 / 875
#125 / 363
6,296
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-12 10:41:36
#24,107
5,410
-886 (-16.38%)
Anonymous

Storage Details
Crucial BX500 Series
SSD (2.5" SATA)
1000G
SSD
Crucial
CT1000BX500SSD1
2.5 inch
SATA
3.00
5,000
174c:5136
0x174c (ASMedia Technology Inc.)
0x5136 (ASM1053 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
161 MB/s
136.15 MB/s
134.4 MB/s
5,829 IOPS
4,021 IOPS
23,319 KB/s
16,087 KB/s
21,201 KB/s
19,321 KB/s
12,446 KB/s
21,151 KB/s

inxi Results
System: Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=613bb13b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 174.5 MiB (4.4%) gpu: 32.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 174x38 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.115-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 8.20 TiB used: 4.10 TiB (50.0%) ID-1: /dev/mmcblk0 model: SU16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: Backup+ Hub BK size: 7.28 TiB block size: physical: 4096 B logical: 512 B rev: D781 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. ID-3: /dev/sdb type: USB vendor: Crucial model: CT1000BX500SSD1 size: 931.51 GiB block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: M6CR030 temp: 25 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 13 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.58 GiB size: 14.32 GiB (98.24%) used: 3.55 GiB (24.8%) fs: ext4 block size: 4096 B dev: /dev/sdb2 label: rootfs uuid: 000c3e81-91f5-fbd6-164e-f6c6c587312e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 1812-A721 ID-3: /media/HDD-8TB raw size: 7.28 TiB size: 7.22 TiB (99.20%) used: 4.10 TiB (56.7%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: BX-Medien-Archiv uuid: fb2eb48a-ca12-4bef-af39-b0b87d6b9ca5 ID-4: /media/SSD-1TB raw size: 916.68 GiB size: 901.29 GiB (98.32%) used: 71.7 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sdb3 label: MP3-Depot uuid: b458c093-b89a-4ea1-bd9e-803d36d09efd Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 000c3e81-91f5-fbd6-164e-f6c6c587312e ID-2: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 1812-A721 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:5136 Hub: 2-2:3 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 Device-2: 2-2.1:4 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 1: deb [arch=armhf] https: //repo.jellyfin.org/raspbian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 3.8% command: init pid: 1 mem: 7.83 MiB (0.1%) 2: cpu: 1.5% command: [kworker/2:1-mm_percpu_wq] pid: 33 mem: 0.00 MiB (0.0%) 3: cpu: 0.9% command: systemd-journald pid: 123 mem: 6.81 MiB (0.1%) 4: cpu: 0.6% command: [usb-storage] pid: 89 mem: 0.00 MiB (0.0%) 5: cpu: 0.6% command: systemd-udevd pid: 155 mem: 3.81 MiB (0.0%) Memory top: 5 1: mem: 15.8 MiB (0.4%) command: smbd pid: 696 cpu: 0.3% 2: mem: 8.87 MiB (0.2%) command: nmbd pid: 507 cpu: 0.2% 3: mem: 7.87 MiB (0.1%) command: argononed.py started by: python3 pid: 767 cpu: 0.1% 4: mem: 7.83 MiB (0.1%) command: init pid: 1 cpu: 3.8% 5: mem: 7.25 MiB (0.1%) command: systemd pid: 789 cpu: 0.2% Info: Processes: 135 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.115-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 
           root=PARTUUID=613bb13b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 174.5 MiB (4.4%) gpu: 32.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 174x38 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.115-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 8.20 TiB used: 4.10 TiB (50.0%) 
           ID-1: /dev/mmcblk0 model: SU16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: Backup+ Hub BK size: 7.28 TiB 
           block size: physical: 4096 B logical: 512 B rev: D781 scheme: GPT 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-3: /dev/sdb type: USB vendor: Crucial model: CT1000BX500SSD1 size: 931.51 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s rev: M6CR030 temp: 25 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 13 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.58 GiB size: 14.32 GiB (98.24%) used: 3.55 GiB (24.8%) fs: ext4 
           block size: 4096 B dev: /dev/sdb2 label: rootfs 
           uuid: 000c3e81-91f5-fbd6-164e-f6c6c587312e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 1812-A721 
           ID-3: /media/HDD-8TB raw size: 7.28 TiB size: 7.22 TiB (99.20%) used: 4.10 TiB (56.7%) 
           fs: ext4 block size: 4096 B dev: /dev/sda1 label: BX-Medien-Archiv 
           uuid: fb2eb48a-ca12-4bef-af39-b0b87d6b9ca5 
           ID-4: /media/SSD-1TB raw size: 916.68 GiB size: 901.29 GiB (98.32%) 
           used: 71.7 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sdb3 label: MP3-Depot 
           uuid: b458c093-b89a-4ea1-bd9e-803d36d09efd 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 000c3e81-91f5-fbd6-164e-f6c6c587312e 
           ID-2: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 1812-A721 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Seagate RSS LLC ports: 3 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:ab44 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia ASM1053 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:5136 
           Hub: 2-2:3 info: Seagate RSS LLC ports: 3 rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab45 
           Device-2: 2-2.1:4 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab38 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 
           1: deb [arch=armhf] https: //repo.jellyfin.org/raspbian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 3.8% command: init pid: 1 mem: 7.83 MiB (0.1%) 
           2: cpu: 1.5% command: [kworker/2:1-mm_percpu_wq] pid: 33 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.9% command: systemd-journald pid: 123 mem: 6.81 MiB (0.1%) 
           4: cpu: 0.6% command: [usb-storage] pid: 89 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.6% command: systemd-udevd pid: 155 mem: 3.81 MiB (0.0%) 
           Memory top: 5 
           1: mem: 15.8 MiB (0.4%) command: smbd pid: 696 cpu: 0.3% 
           2: mem: 8.87 MiB (0.2%) command: nmbd pid: 507 cpu: 0.2% 
           3: mem: 7.87 MiB (0.1%) command: argononed.py started by: python3 pid: 767 cpu: 0.1% 
           4: mem: 7.83 MiB (0.1%) command: init pid: 1 cpu: 3.8% 
           5: mem: 7.25 MiB (0.1%) command: systemd pid: 789 cpu: 0.2% 
Info:      Processes: 135 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24107 - Brand: Crucial BX500 Series