Benchmark #24194 - pibenchmarks.com

Brand: Transcend StoreJet USB to 2.5" SATA Enclosure
SSD (Portable)
#236 / 1,679
69
#646 / 1,679
#623 / 984
#91 / 144
6,243
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-13 04:51:40
#24,194
3,113
-3,130 (-100.55%)
Herby

Storage Details
Transcend StoreJet USB to 2.5" SATA Enclosure
SSD (Portable)
16G
SSD
Transcend
StoreJet
1.8 inch
SATA
3.10
5,000
8564:7000
0x8564 (Transcend Information, Inc.)
0x7000 (HSDPA Modem)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
48.6 MB/s
235.38 MB/s
198.44 MB/s
2,332 IOPS
9,766 IOPS
9,328 KB/s
39,065 KB/s
27,944 KB/s
20,764 KB/s
13,299 KB/s
9,792 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=298a91ee-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 Memory: RAM: total: 1000.5 MiB used: 420.4 MiB (42.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: fbdev unloaded: modesetting tty: 117x63 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 22.32 GiB used: 3.75 GiB (16.8%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SSD U110 16GB size: 14.91 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.66 GiB size: 14.36 GiB (98.00%) used: 3.64 GiB (25.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: b464c09e-6c39-4513-8cd0-32f37c5b5b36 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /media/pi/3FF6-A759 raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 52.7 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 3FF6-A759 ID-4: /media/pi/rootfs raw size: 7.15 GiB size: 6.98 GiB (97.58%) used: 7.4 MiB (0.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 37.3 MiB (37.3%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Transcend Information type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 8564:7000 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main 2: deb-src https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.1% command: xrdp pid: 1605 mem: 24.7 MiB (2.6%) 2: cpu: 1.4% command: baobab pid: 1868 mem: 44.1 MiB (4.7%) 3: cpu: 1.3% command: xorg pid: 1612 mem: 79.2 MiB (8.5%) 4: cpu: 0.8% command: packagekitd pid: 5114 mem: 13.1 MiB (1.4%) 5: cpu: 0.7% command: iobroker.js-controller pid: 450 mem: 42.0 MiB (4.5%) Memory top: 5 1: mem: 79.2 MiB (8.5%) command: xorg pid: 1612 cpu: 1.3% 2: mem: 44.1 MiB (4.7%) command: baobab pid: 1868 cpu: 1.4% 3: mem: 42.9 MiB (4.6%) command: io.info.0 pid: 689 cpu: 0.3% 4: mem: 42.7 MiB (4.6%) command: io.admin.0 pid: 539 cpu: 0.3% 5: mem: 42.0 MiB (4.5%) command: iobroker.js-controller pid: 450 cpu: 0.7% Info: Processes: 162 Uptime: 29m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=298a91ee-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 
           Memory:    RAM: total: 1000.5 MiB used: 420.4 MiB (42.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: fbdev unloaded: modesetting 
           tty: 117x63 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 22.32 GiB used: 3.75 GiB (16.8%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD U110 16GB size: 14.91 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.66 GiB size: 14.36 GiB (98.00%) used: 3.64 GiB (25.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: b464c09e-6c39-4513-8cd0-32f37c5b5b36 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
           ID-3: /media/pi/3FF6-A759 raw size: 256.0 MiB size: 255.7 MiB (99.89%) 
           used: 52.7 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A 
           uuid: 3FF6-A759 
           ID-4: /media/pi/rootfs raw size: 7.15 GiB size: 6.98 GiB (97.58%) used: 7.4 MiB (0.1%) 
           fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 37.3 MiB (37.3%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Transcend Information type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 8564:7000 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           2: deb-src https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.1% command: xrdp pid: 1605 mem: 24.7 MiB (2.6%) 
           2: cpu: 1.4% command: baobab pid: 1868 mem: 44.1 MiB (4.7%) 
           3: cpu: 1.3% command: xorg pid: 1612 mem: 79.2 MiB (8.5%) 
           4: cpu: 0.8% command: packagekitd pid: 5114 mem: 13.1 MiB (1.4%) 
           5: cpu: 0.7% command: iobroker.js-controller pid: 450 mem: 42.0 MiB (4.5%) 
           Memory top: 5 
           1: mem: 79.2 MiB (8.5%) command: xorg pid: 1612 cpu: 1.3% 
           2: mem: 44.1 MiB (4.7%) command: baobab pid: 1868 cpu: 1.4% 
           3: mem: 42.9 MiB (4.6%) command: io.info.0 pid: 689 cpu: 0.3% 
           4: mem: 42.7 MiB (4.6%) command: io.admin.0 pid: 539 cpu: 0.3% 
           5: mem: 42.0 MiB (4.5%) command: iobroker.js-controller pid: 450 cpu: 0.7% 
Info:      Processes: 162 Uptime: 29m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24194 - Brand: Transcend StoreJet USB to 2.5" SATA Enclosure