Benchmark #24250 - pibenchmarks.com

Brand: SanDisk SD Ultra (SD16G)
C10 V10 U1
#208 / 1,701
86
#1,548 / 1,701
#340 / 405
631
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-13 13:55:52
#24,250
697
+66 (+9.47%)
Anonymous
rtest

Secure Digital (SD) Card Details
SanDisk SD Ultra (SD16G)
C10 V10 U1
26.5G
SD
SanDisk
SD16G
SD
5.00
0x00
42
2.0
01/2020
Class 10
None
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
21.1 MB/s
42.41 MB/s
40.69 MB/s
419 IOPS
1,833 IOPS
1,679 KB/s
7,334 KB/s
6,325 KB/s
1,893 KB/s
4,800 KB/s
932 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 1.12 GiB (56.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 141x77 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 3.89 TiB used: 1.15 TiB (29.5%) ID-1: /dev/mmcblk0 model: SD16G size: 29.16 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: ST31500341AS family: Barracuda 7200.11 size: 1.36 TiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 7200 rpm rev: CC1H temp: 45 C scheme: GPT SMART: yes state: enabled health: PASSED on: 3y 195d 5h cycles: 55 read: 1.10 TiB written: 1.21 TiB Pre-Fail: reallocated sector: 100 threshold: 36 attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 ID-3: /dev/sdb type: USB vendor: Intenso model: External USB 3.0 drive vendor: Seagate drive model: ST1750LM000 HN-M171RAD size: 1.59 TiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: 5438 drive rev: 2BC10001 temp: 26 C SMART: yes state: enabled health: PASSED on: 51d 16h cycles: 610 ID-4: /dev/sdc type: USB vendor: Western Digital model: WD10 EACS-00ZJB0 size: 931.51 GiB block size: physical: 512 B logical: 512 B rev: 01.0 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 26.50 GiB size: 25.96 GiB (97.96%) used: 8.56 GiB (33.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: a4bab063-472e-4a2f-b143-2ed6f6fea9f9 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: DAA4-FF70 ID-3: /media/Oxyno raw size: 1.36 TiB size: 1.36 TiB (100.00%) used: 578.79 GiB (41.4%) fs: hfsplus block size: 4096 B dev: /dev/sda2 label: Oxyno uuid: 75176581-1e97-37c4-9ed1-7e4c02f7fb6d ID-4: /media/Oxyno_Backup raw size: 931.19 GiB size: 931.19 GiB (100.00%) used: 579.53 GiB (62.2%) fs: hfsplus block size: 4096 B dev: /dev/sdc2 label: Oxyno_Backup uuid: e8ce6390-5fe0-3cf5-b049-014837ed97ae ID-5: /media/System raw size: 1.59 TiB size: 1.57 TiB (98.37%) used: 9.11 GiB (0.6%) fs: ext4 block size: 4096 B dev: /dev/sdb label: System uuid: 3383b723-4249-4da7-9307-5e2fd3de5f0f Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 26B4-8665 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: cca01a9a-1c14-43c1-871b-3faaf5d94d44 ID-4: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 70D6-1701 ID-5: /dev/sdc1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: HP type: Printer driver: usblp interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 03f0:be2a Device-2: 1-1.4:4 info: PLX (formerly Oxford ) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0928:0003 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Device-4: 2-2:3 info: VIA Labs VL701 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0701 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/gitlab_gitlab-ce.list 1: deb https: //packages.gitlab.com/gitlab/gitlab-ce/raspbian/ buster main 2: deb-src https: //packages.gitlab.com/gitlab/gitlab-ce/raspbian/ buster main Active apt repos in: /etc/apt/sources.list.d/gitlab_gitlab-ee.list 1: deb https: //packages.gitlab.com/gitlab/gitlab-ee/raspbian/ buster main 2: deb-src https: //packages.gitlab.com/gitlab/gitlab-ee/raspbian/ buster main Active apt repos in: /etc/apt/sources.list.d/gitlab_raspberry-pi2.list 1: deb https: //packages.gitlab.com/gitlab/raspberry-pi2/raspbian/ buster main 2: deb-src https: //packages.gitlab.com/gitlab/raspberry-pi2/raspbian/ buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 45.5% command: unicorn pid: 754 mem: 353.3 MiB (18.2%) 2: cpu: 44.8% command: sidekiq pid: 641 mem: 354.4 MiB (18.2%) 3: cpu: 4.0% command: postgres: pid: 2974 mem: 19.8 MiB (1.0%) 4: cpu: 3.0% command: postgres: pid: 2973 mem: 17.5 MiB (0.9%) 5: cpu: 2.5% command: gitaly-ruby started by: ruby pid: 746 mem: 52.8 MiB (2.7%) Memory top: 5 1: mem: 354.4 MiB (18.2%) command: sidekiq pid: 641 cpu: 44.8% 2: mem: 353.3 MiB (18.2%) command: unicorn pid: 754 cpu: 45.5% 3: mem: 341.4 MiB (17.6%) command: unicorn pid: 1047 cpu: 0.4% 4: mem: 341.4 MiB (17.6%) command: unicorn pid: 1046 cpu: 0.4% 5: mem: 52.8 MiB (2.7%) command: gitaly-ruby started by: ruby pid: 746 cpu: 2.5% Info: Processes: 223 Uptime: 4m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 1.12 GiB (56.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 141x77 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 3.89 TiB used: 1.15 TiB (29.5%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 29.16 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: ST31500341AS family: Barracuda 7200.11 
           size: 1.36 TiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s 
           rotation: 7200 rpm rev: CC1H temp: 45 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 3y 195d 5h cycles: 55 read: 1.10 TiB 
           written: 1.21 TiB Pre-Fail: reallocated sector: 100 threshold: 36 
           attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 
           ID-3: /dev/sdb type: USB vendor: Intenso model: External USB 3.0 drive vendor: Seagate 
           drive model: ST1750LM000 HN-M171RAD size: 1.59 TiB block size: physical: 4096 B 
           logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: 5400 rpm rev: 5438 drive rev: 2BC10001 temp: 26 C 
           SMART: yes state: enabled health: PASSED on: 51d 16h cycles: 610 
           ID-4: /dev/sdc type: USB vendor: Western Digital model: WD10 EACS-00ZJB0 
           size: 931.51 GiB block size: physical: 512 B logical: 512 B rev: 01.0 
           scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 26.50 GiB size: 25.96 GiB (97.96%) used: 8.56 GiB (33.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: a4bab063-472e-4a2f-b143-2ed6f6fea9f9 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: DAA4-FF70 
           ID-3: /media/Oxyno raw size: 1.36 TiB size: 1.36 TiB (100.00%) used: 578.79 GiB (41.4%) 
           fs: hfsplus block size: 4096 B dev: /dev/sda2 label: Oxyno 
           uuid: 75176581-1e97-37c4-9ed1-7e4c02f7fb6d 
           ID-4: /media/Oxyno_Backup raw size: 931.19 GiB size: 931.19 GiB (100.00%) 
           used: 579.53 GiB (62.2%) fs: hfsplus block size: 4096 B dev: /dev/sdc2 
           label: Oxyno_Backup uuid: e8ce6390-5fe0-3cf5-b049-014837ed97ae 
           ID-5: /media/System raw size: 1.59 TiB size: 1.57 TiB (98.37%) used: 9.11 GiB (0.6%) 
           fs: ext4 block size: 4096 B dev: /dev/sdb label: System 
           uuid: 3383b723-4249-4da7-9307-5e2fd3de5f0f 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 26B4-8665 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: cca01a9a-1c14-43c1-871b-3faaf5d94d44 
           ID-4: /dev/sda1 size: 200.0 MiB fs: vfat label: EFI uuid: 70D6-1701 
           ID-5: /dev/sdc1 size: 200.0 MiB fs: vfat label: EFI uuid: 67E3-17ED 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: HP type: Printer driver: usblp interfaces: 4 rev: 2.0 
           speed: 480 Mb/s chip ID: 03f0:be2a Device-2: 1-1.4:4 info: PLX (formerly Oxford ) type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0928:0003 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Device-4: 2-2:3 info: VIA Labs VL701 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0701 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/gitlab_gitlab-ce.list 
           1: deb https: //packages.gitlab.com/gitlab/gitlab-ce/raspbian/ buster main
           2: deb-src https: //packages.gitlab.com/gitlab/gitlab-ce/raspbian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/gitlab_gitlab-ee.list 
           1: deb https: //packages.gitlab.com/gitlab/gitlab-ee/raspbian/ buster main
           2: deb-src https: //packages.gitlab.com/gitlab/gitlab-ee/raspbian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/gitlab_raspberry-pi2.list 
           1: deb https: //packages.gitlab.com/gitlab/raspberry-pi2/raspbian/ buster main
           2: deb-src https: //packages.gitlab.com/gitlab/raspberry-pi2/raspbian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 45.5% command: unicorn pid: 754 mem: 353.3 MiB (18.2%) 
           2: cpu: 44.8% command: sidekiq pid: 641 mem: 354.4 MiB (18.2%) 
           3: cpu: 4.0% command: postgres: pid: 2974 mem: 19.8 MiB (1.0%) 
           4: cpu: 3.0% command: postgres: pid: 2973 mem: 17.5 MiB (0.9%) 
           5: cpu: 2.5% command: gitaly-ruby started by: ruby pid: 746 mem: 52.8 MiB (2.7%) 
           Memory top: 5 
           1: mem: 354.4 MiB (18.2%) command: sidekiq pid: 641 cpu: 44.8% 
           2: mem: 353.3 MiB (18.2%) command: unicorn pid: 754 cpu: 45.5% 
           3: mem: 341.4 MiB (17.6%) command: unicorn pid: 1047 cpu: 0.4% 
           4: mem: 341.4 MiB (17.6%) command: unicorn pid: 1046 cpu: 0.4% 
           5: mem: 52.8 MiB (2.7%) command: gitaly-ruby started by: ruby pid: 746 cpu: 2.5% 
Info:      Processes: 223 Uptime: 4m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24250 - Brand: SanDisk SD Ultra (SD16G)