Benchmark #24347 - pibenchmarks.com

Brand: Samsung 860 EVO
SSD (2.5" SATA)
#19 / 1,679
691
#496 / 1,679
#479 / 984
#79 / 370
7,083
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-14 16:03:53
#24,347
2,764
-4,319 (-156.26%)
Anonymous
SATA SSD

Storage Details
Samsung 860 EVO
SSD (2.5" SATA)
1000G
SSD
Samsung
SSD860EVO1TB
2.5 inch
SATA
2.10
480
2109:1561
0x2109
0x1561
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.2 MB/s
31.77 MB/s
31.76 MB/s
3,929 IOPS
4,049 IOPS
15,717 KB/s
16,199 KB/s
13,105 KB/s
10,692 KB/s
11,621 KB/s
11,897 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 427.2 MiB (10.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 204x11 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 989.73 GiB used: 2.28 GiB (0.2%) ID-1: /dev/mmcblk0 model: SD64G size: 58.22 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Samsung drive model: SSD 860 EVO 1TB size: 931.51 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: RVT04B6Q temp: 29 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 25 written: 16.65 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 931.26 GiB size: 916.90 GiB (98.46%) used: 2.23 GiB (0.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 ID-2: /dev/mmcblk0p2 size: 57.96 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:1561 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/download_docker_com_linux_debian.list 1: deb https: //download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 6.9% command: glances started by: python3 pid: 14350 mem: 34.9 MiB (0.8%) 2: cpu: 0.3% command: init pid: 1 mem: 8.18 MiB (0.2%) 3: cpu: 0.3% command: dockerd pid: 10177 mem: 61.7 MiB (1.5%) 4: cpu: 0.2% command: containerd pid: 9277 mem: 31.4 MiB (0.8%) 5: cpu: 0.2% command: smartd pid: 18052 mem: 3.21 MiB (0.0%) Memory top: 5 1: mem: 61.7 MiB (1.5%) command: dockerd pid: 10177 cpu: 0.3% 2: mem: 34.9 MiB (0.8%) command: glances started by: python3 pid: 14350 cpu: 6.9% 3: mem: 31.4 MiB (0.8%) command: containerd pid: 9277 cpu: 0.2% 4: mem: 24.0 MiB (0.6%) command: glances started by: python3 pid: 4327 cpu: 0.0% 5: mem: 15.9 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 pid: 6946 cpu: 0.0% Info: Processes: 133 Uptime: 1h 47m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 427.2 MiB (10.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 204x11 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 989.73 GiB used: 2.28 GiB (0.2%) 
           ID-1: /dev/mmcblk0 model: SD64G size: 58.22 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: Samsung 
           drive model: SSD 860 EVO 1TB size: 931.51 GiB block size: physical: 4096 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: RVT04B6Q temp: 29 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 25 written: 16.65 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 931.26 GiB size: 916.90 GiB (98.46%) used: 2.23 GiB (0.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
           ID-2: /dev/mmcblk0p2 size: 57.96 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:1561 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/download_docker_com_linux_debian.list 
           1: deb https: //download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 6.9% command: glances started by: python3 pid: 14350 mem: 34.9 MiB (0.8%) 
           2: cpu: 0.3% command: init pid: 1 mem: 8.18 MiB (0.2%) 
           3: cpu: 0.3% command: dockerd pid: 10177 mem: 61.7 MiB (1.5%) 
           4: cpu: 0.2% command: containerd pid: 9277 mem: 31.4 MiB (0.8%) 
           5: cpu: 0.2% command: smartd pid: 18052 mem: 3.21 MiB (0.0%) 
           Memory top: 5 
           1: mem: 61.7 MiB (1.5%) command: dockerd pid: 10177 cpu: 0.3% 
           2: mem: 34.9 MiB (0.8%) command: glances started by: python3 pid: 14350 cpu: 6.9% 
           3: mem: 31.4 MiB (0.8%) command: containerd pid: 9277 cpu: 0.2% 
           4: mem: 24.0 MiB (0.6%) command: glances started by: python3 pid: 4327 cpu: 0.0% 
           5: mem: 15.9 MiB (0.4%) command: unattended-upgrade-shutdown started by: python3 
           pid: 6946 cpu: 0.0% 
Info:      Processes: 133 Uptime: 1h 47m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24347 - Brand: Samsung 860 EVO