Benchmark #24367 - pibenchmarks.com

Brand: SanDisk SD High Endurance (SH32G)
A1 C10 V30 U3
#114 / 1,701
167
#1,370 / 1,701
#230 / 405
1,131
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-15 00:13:56
#24,367
1,109
-22 (-1.98%)
Anonymous
Sandisk High Endurance 32GB

Secure Digital (SD) Card Details
SanDisk SD High Endurance (SH32G)
A1 C10 V30 U3
29.5G
SD
SanDisk
SH32G
SDHC
6.00
0x03
WD
8.0
09/2019
Class 10
A1
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,140 (+640)
650 (+150)
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.4 MB/s
41.1 MB/s
40.18 MB/s
840 IOPS
2,245 IOPS
3,363 KB/s
8,983 KB/s
8,164 KB/s
1,991 KB/s
6,133 KB/s
2,713 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 video=HDMI-A-2:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c8ebee84-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Xfce 4.12.4 tk: Gtk 2.24.32 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 707.2 MiB (17.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1652 Speed: 2295 MHz min/max: 656/2295 MHz Core speeds (MHz): 1: 2295 2: 2295 3: 2295 4: 2295 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.0x9.4") s-diag: 449mm (17.7") Monitor-1: HDMI-1 res: 1440x900 hz: 75 dpi: 229 size: 160x90mm (6.3x3.5") diag: 184mm (7.2") Monitor-2: HDMI-2 res: 1440x900 hz: 75 dpi: 229 size: 160x90mm (6.3x3.5") diag: 184mm (7.2") OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link WAN IP: Drives: Local Storage: total: 29.72 GiB used: 7.99 GiB (26.9%) ID-1: /dev/mmcblk0 vendor: Smart Modular Tech. model: SH32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.88 GiB (98.00%) used: 7.94 GiB (27.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c534 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 25.3% command: chromium-browser-v7 pid: 5456 mem: 117.9 MiB (3.0%) 2: cpu: 15.7% command: chromium-browser-v7 pid: 5467 mem: 93.5 MiB (2.3%) 3: cpu: 8.1% command: chromium-browser-v7 pid: 4688 mem: 129.0 MiB (3.3%) 4: cpu: 5.5% command: xorg pid: 526 mem: 64.6 MiB (1.6%) 5: cpu: 5.3% command: chromium-browser-v7 pid: 4743 mem: 83.6 MiB (2.1%) Memory top: 5 1: mem: 129.0 MiB (3.3%) command: chromium-browser-v7 pid: 4688 cpu: 8.1% 2: mem: 117.9 MiB (3.0%) command: chromium-browser-v7 pid: 5456 cpu: 25.3% 3: mem: 93.5 MiB (2.3%) command: chromium-browser-v7 pid: 5467 cpu: 15.7% 4: mem: 83.6 MiB (2.1%) command: chromium-browser-v7 pid: 4743 cpu: 5.3% 5: mem: 74.9 MiB (1.9%) command: chromium-browser-v7 pid: 4769 cpu: 2.2% Info: Processes: 213 Uptime: 21m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           video=HDMI-A-2:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c8ebee84-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Xfce 4.12.4 tk: Gtk 2.24.32 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 707.2 MiB (17.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1652 
           Speed: 2295 MHz min/max: 656/2295 MHz Core speeds (MHz): 1: 2295 2: 2295 3: 2295 
           4: 2295 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.0x9.4") 
           s-diag: 449mm (17.7") 
           Monitor-1: HDMI-1 res: 1440x900 hz: 75 dpi: 229 size: 160x90mm (6.3x3.5") 
           diag: 184mm (7.2") 
           Monitor-2: HDMI-2 res: 1440x900 hz: 75 dpi: 229 size: 160x90mm (6.3x3.5") 
           diag: 184mm (7.2") 
           OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           WAN IP:  
Drives:    Local Storage: total: 29.72 GiB used: 7.99 GiB (26.9%) 
           ID-1: /dev/mmcblk0 vendor: Smart Modular Tech. model: SH32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.88 GiB (98.00%) used: 7.94 GiB (27.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c534 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 25.3% command: chromium-browser-v7 pid: 5456 mem: 117.9 MiB (3.0%) 
           2: cpu: 15.7% command: chromium-browser-v7 pid: 5467 mem: 93.5 MiB (2.3%) 
           3: cpu: 8.1% command: chromium-browser-v7 pid: 4688 mem: 129.0 MiB (3.3%) 
           4: cpu: 5.5% command: xorg pid: 526 mem: 64.6 MiB (1.6%) 
           5: cpu: 5.3% command: chromium-browser-v7 pid: 4743 mem: 83.6 MiB (2.1%) 
           Memory top: 5 
           1: mem: 129.0 MiB (3.3%) command: chromium-browser-v7 pid: 4688 cpu: 8.1% 
           2: mem: 117.9 MiB (3.0%) command: chromium-browser-v7 pid: 5456 cpu: 25.3% 
           3: mem: 93.5 MiB (2.3%) command: chromium-browser-v7 pid: 5467 cpu: 15.7% 
           4: mem: 83.6 MiB (2.1%) command: chromium-browser-v7 pid: 4743 cpu: 5.3% 
           5: mem: 74.9 MiB (1.9%) command: chromium-browser-v7 pid: 4769 cpu: 2.2% 
Info:      Processes: 213 Uptime: 21m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24367 - Brand: SanDisk SD High Endurance (SH32G)