Benchmark #24433 - pibenchmarks.com

Brand: Lexar USB Flash Drive
USB Flash
#225 / 1,539
44
#1,111 / 1,539
#21 / 90
#23 / 86
1,297
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.pl Amazon.sg

Overview
2020-05-15 12:13:05
#24,433
1,390
+93 (+6.69%)
Anonymous
Lexar S47 on PI3B USB2.0

Storage Details
Lexar USB Flash Drive
USB Flash
27G
USB Flash
Lexar
USBFlashDrive
0x2800
2.10
480
21c4:0cd1
0x21c4
0x0cd1
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Ubuntu 18.04.4 LTS
armv7l

Benchmark Results
14.7 MB/s
29.78 MB/s
30.53 MB/s
1,491 IOPS
1,562 IOPS
5,965 KB/s
6,249 KB/s
7,337 KB/s
6,499 KB/s
5,777 KB/s
6,660 KB/s

inxi Results
System: Kernel: 4.15.0-1061-raspi2 armv7l bits: 32 compiler: gcc v: 7.5.0 parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=cfq fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: MATE 1.20.1 info: mate-panel wm: marco 1.20.1 dm: LightDM 1.26.0 Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: 2a02082 Memory: RAM: total: 999.0 MiB used: 627.7 MiB (62.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.19.6 compositor: marco v: 1.20.1 driver: fbturbo display ID: :0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: default res: 1920x1080 OpenGL: renderer: llvmpipe (LLVM 9.0 128 bits) v: 3.3 Mesa 19.2.8 compat-v: 3.1 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.15.0-1061-raspi2 Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: down mac: IF-ID-1: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link WAN IP: Drives: Local Storage: total: 29.81 GiB used: 5.79 GiB (19.4%) ID-1: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 29.81 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.62 GiB size: 29.03 GiB (98.01%) used: 5.73 GiB (19.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: 1db902d9-bc8c-4de6-b8f0-dcab181d2aad ID-2: /boot/firmware raw size: 199.0 MiB size: 195.9 MiB (98.45%) used: 61.4 MiB (31.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: 5650-3386 ID-3: /snap/core/6534 raw size: 76.8 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A ID-4: /snap/core/9069 raw size: 79.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop5 label: N/A uuid: N/A ID-5: /snap/core18/1751 raw size: 45.5 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A ID-6: /snap/midori/551 raw size: 145.4 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop4 label: N/A uuid: N/A ID-7: /snap/pulsemixer/25 raw size: 6.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop10 label: N/A uuid: N/A ID-8: /snap/pulsemixer/286 raw size: 6.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop6 label: N/A uuid: N/A ID-9: /snap/software-boutique/28 raw size: 62.6 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A ID-10: /snap/software-boutique/55 raw size: 16 KiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop8 label: N/A uuid: N/A ID-11: /snap/ubuntu-mate-pi/5 raw size: 8 KiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop7 label: N/A uuid: N/A ID-12: /snap/ubuntu-mate-welcome/241 raw size: 78.4 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A ID-13: /snap/ubuntu-mate-welcome/541 raw size: 14.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop9 label: N/A uuid: N/A Swap: Kernel: swappiness: 10 (default 60) cache pressure: 50 (default 100) ID-1: swap-1 type: file size: 128.0 MiB used: 22.8 MiB (17.8%) priority: -2 file: /swapfile Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Hub: 1-1.3:4 info: Apple Extended Keyboard Hub [Mitsumi] ports: 3 rev: 1.1 speed: 12 Mb/s chip ID: 05ac:1002 Device-2: 1-1.3.1:5 info: Apple Extended Keyboard [Mitsumi] type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 05ac:0205 Device-3: 1-1.3.2:7 info: Microsoft type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:07b2 Device-4: 1-1.5:6 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 21c4:0cd1 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ bionic main restricted universe multiverse 2: deb-src http: //ports.ubuntu.com/ bionic main restricted universe multiverse 3: deb http: //ports.ubuntu.com/ bionic-updates main restricted universe multiverse 4: deb-src http: //ports.ubuntu.com/ bionic-updates main restricted universe multiverse 5: deb http: //ports.ubuntu.com/ bionic-security main restricted universe multiverse 6: deb-src http: //ports.ubuntu.com/ bionic-security main restricted universe multiverse 7: deb http: //ports.ubuntu.com/ bionic-backports main restricted universe multiverse 8: deb-src http: //ports.ubuntu.com/ bionic-backports main restricted universe multiverse 9: deb http: //ports.ubuntu.com/ubuntu-ports/ bionic main universe restricted multiverse No active apt repos in: /etc/apt/sources.list.d/balena-etcher.list Active apt repos in: /etc/apt/sources.list.d/ubuntu-pi-flavour-makers-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-pi-flavour-makers/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 44.0% command: chromium-browser pid: 3881 mem: 90.4 MiB (9.7%) 2: cpu: 22.9% command: chromium-browser pid: 3409 mem: 73.0 MiB (7.9%) 3: cpu: 17.9% command: chromium-browser pid: 2420 mem: 71.6 MiB (7.7%) 4: cpu: 13.8% command: chromium-browser pid: 2501 mem: 58.2 MiB (6.3%) 5: cpu: 10.8% command: xorg pid: 1019 mem: 76.6 MiB (8.3%) Memory top: 5 1: mem: 90.4 MiB (9.7%) command: chromium-browser pid: 3881 cpu: 44.0% 2: mem: 76.6 MiB (8.3%) command: xorg pid: 1019 cpu: 10.8% 3: mem: 73.0 MiB (7.9%) command: chromium-browser pid: 3409 cpu: 22.9% 4: mem: 71.6 MiB (7.7%) command: chromium-browser pid: 2420 cpu: 17.9% 5: mem: 58.2 MiB (6.3%) command: chromium-browser pid: 2501 cpu: 13.8% Info: Processes: 200 Uptime: 11m Init: systemd v: 237 runlevel: 5 target: graphical.target Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.15.0-1061-raspi2 armv7l bits: 32 compiler: gcc v: 7.5.0 
           parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable 
           rootfstype=ext4 elevator=cfq fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: MATE 1.20.1 info: mate-panel wm: marco 1.20.1 dm: LightDM 1.26.0 
           Distro: Ubuntu 18.04.4 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: 2a02082 
           Memory:    RAM: total: 999.0 MiB used: 627.7 MiB (62.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.19.6 compositor: marco v: 1.20.1 driver: fbturbo 
           display ID: :0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") 
           s-diag: 583mm (23") 
           Monitor-1: default res: 1920x1080 
           OpenGL: renderer: llvmpipe (LLVM 9.0 128 bits) v: 3.3 Mesa 19.2.8 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.15.0-1061-raspi2 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: down mac:  
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           WAN IP:  
Drives:    Local Storage: total: 29.81 GiB used: 5.79 GiB (19.4%) 
           ID-1: /dev/sda type: USB vendor: Lexar model: USB Flash Drive size: 29.81 GiB 
           block size: physical: 512 B logical: 512 B rev: 1100 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.62 GiB size: 29.03 GiB (98.01%) used: 5.73 GiB (19.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: 1db902d9-bc8c-4de6-b8f0-dcab181d2aad 
           ID-2: /boot/firmware raw size: 199.0 MiB size: 195.9 MiB (98.45%) 
           used: 61.4 MiB (31.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: 5650-3386 
           ID-3: /snap/core/6534 raw size: 76.8 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A 
           ID-4: /snap/core/9069 raw size: 79.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop5 label: N/A uuid: N/A 
           ID-5: /snap/core18/1751 raw size: 45.5 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
           ID-6: /snap/midori/551 raw size: 145.4 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop4 label: N/A uuid: N/A 
           ID-7: /snap/pulsemixer/25 raw size: 6.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop10 label: N/A uuid: N/A 
           ID-8: /snap/pulsemixer/286 raw size: 6.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop6 label: N/A uuid: N/A 
           ID-9: /snap/software-boutique/28 raw size: 62.6 MiB size: N/A (hidden?) 
           used: N/A (hidden?) fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A 
           ID-10: /snap/software-boutique/55 raw size: 16 KiB size: N/A (hidden?) 
           used: N/A (hidden?) fs: squashfs dev: /dev/loop8 label: N/A uuid: N/A 
           ID-11: /snap/ubuntu-mate-pi/5 raw size: 8 KiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop7 label: N/A uuid: N/A 
           ID-12: /snap/ubuntu-mate-welcome/241 raw size: 78.4 MiB size: N/A (hidden?) 
           used: N/A (hidden?) fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A 
           ID-13: /snap/ubuntu-mate-welcome/541 raw size: 14.9 MiB size: N/A (hidden?) 
           used: N/A (hidden?) fs: squashfs dev: /dev/loop9 label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 10 (default 60) cache pressure: 50 (default 100) 
           ID-1: swap-1 type: file size: 128.0 MiB used: 22.8 MiB (17.8%) priority: -2 
           file: /swapfile 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Hub: 1-1.3:4 info: Apple Extended Keyboard Hub [Mitsumi] ports: 3 rev: 1.1 
           speed: 12 Mb/s chip ID: 05ac:1002 
           Device-2: 1-1.3.1:5 info: Apple Extended Keyboard [Mitsumi] type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 05ac:0205 
           Device-3: 1-1.3.2:7 info: Microsoft type: Keyboard,Mouse,HID driver: hid-generic,usbhid 
           interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 045e:07b2 
           Device-4: 1-1.5:6 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s chip ID: 21c4:0cd1 Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ bionic main restricted universe multiverse
           2: deb-src http: //ports.ubuntu.com/ bionic main restricted universe multiverse
           3: deb http: //ports.ubuntu.com/ bionic-updates main restricted universe multiverse
           4: deb-src http: //ports.ubuntu.com/ bionic-updates main restricted universe multiverse
           5: deb http: //ports.ubuntu.com/ bionic-security main restricted universe multiverse
           6: deb-src http: //ports.ubuntu.com/ bionic-security main restricted universe multiverse
           7: deb http: //ports.ubuntu.com/ bionic-backports main restricted universe multiverse
           8: deb-src http: //ports.ubuntu.com/ bionic-backports main restricted universe multiverse
           9: deb http: //ports.ubuntu.com/ubuntu-ports/ bionic main universe restricted multiverse
           No active apt repos in: /etc/apt/sources.list.d/balena-etcher.list 
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-pi-flavour-makers-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-pi-flavour-makers/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 44.0% command: chromium-browser pid: 3881 mem: 90.4 MiB (9.7%) 
           2: cpu: 22.9% command: chromium-browser pid: 3409 mem: 73.0 MiB (7.9%) 
           3: cpu: 17.9% command: chromium-browser pid: 2420 mem: 71.6 MiB (7.7%) 
           4: cpu: 13.8% command: chromium-browser pid: 2501 mem: 58.2 MiB (6.3%) 
           5: cpu: 10.8% command: xorg pid: 1019 mem: 76.6 MiB (8.3%) 
           Memory top: 5 
           1: mem: 90.4 MiB (9.7%) command: chromium-browser pid: 3881 cpu: 44.0% 
           2: mem: 76.6 MiB (8.3%) command: xorg pid: 1019 cpu: 10.8% 
           3: mem: 73.0 MiB (7.9%) command: chromium-browser pid: 3409 cpu: 22.9% 
           4: mem: 71.6 MiB (7.7%) command: chromium-browser pid: 2420 cpu: 17.9% 
           5: mem: 58.2 MiB (6.3%) command: chromium-browser pid: 2501 cpu: 13.8% 
Info:      Processes: 200 Uptime: 11m Init: systemd v: 237 runlevel: 5 target: graphical.target 
           Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.1.00

Benchmark #24433 - Brand: Lexar USB Flash Drive