Benchmark #24446 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL32G)
C10 U1
#73 / 1,701
282
#1,504 / 1,701
#311 / 405
800
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-15 15:58:34
#24,446
504
-296 (-58.73%)
Anonymous
this

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL32G)
C10 U1
29.5G
SD
SanDisk
SL32G
SDHC
3.00
0x03
SD
8.0
04/2014
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
9.5 MB/s
17.18 MB/s
15.72 MB/s
237 IOPS
1,334 IOPS
950 KB/s
5,336 KB/s
5,778 KB/s
1,788 KB/s
4,131 KB/s
943 KB/s

inxi Results
System: Host: pogoplug-pi Kernel: 5.4.40-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 976.4 MiB used: 93.4 MiB (9.6%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: NetSarang Computer, Inc. X.org 11.0 driver: N/A note: display driver n/a display ID: 192.168.X.X:0.0 screens: 1 Screen-1: 0 s-res: 1920x1040 s-dpi: 96 s-size: 508x275mm (20.0x10.8") s-diag: 578mm (22.7") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:6 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::6aae:f09f:470b:50a6/64 scope: link IF-ID-1: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 162.202.X.X Drives: Local Storage: total: 33.45 GiB used: 5.08 GiB (15.2%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Generic model: N/A size: 3.72 GiB block size: physical: 512 B logical: 512 B Mass-Storage rev: 1.11 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.66 GiB (9.2%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /opt raw size: 3.46 GiB size: 3.35 GiB (96.63%) used: 2.37 GiB (70.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: 4gbpart uuid: 8fdde457-2cbc-4ce2-be97-8c6f984e69d4 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: CD28-6C97 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:5 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:6 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.4:7 info: GEMBIRD type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1908:0226 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.2% command: [kworker/0:1h-mmc_complete] pid: 2359 mem: 0.00 MiB (0.0%) 2: cpu: 0.5% command: [kworker/0:13-events] pid: 3799 mem: 0.00 MiB (0.0%) 3: cpu: 0.5% command: [kworker/0:65-events_freezable_power_] pid: 3851 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: zsh pid: 3967 mem: 4.34 MiB (0.4%) 5: cpu: 0.3% command: init pid: 1 mem: 8.25 MiB (0.8%) Memory top: 5 1: mem: 16.0 MiB (1.6%) command: smbd pid: 606 cpu: 0.0% 2: mem: 12.0 MiB (1.2%) command: xterm pid: 1455 cpu: 0.0% 3: mem: 8.25 MiB (0.8%) command: init pid: 1 cpu: 0.3% 4: mem: 7.08 MiB (0.7%) command: systemd pid: 1435 cpu: 0.0% 5: mem: 6.67 MiB (0.6%) command: systemd-journald pid: 133 cpu: 0.0% Info: Processes: 304 Uptime: 1h 10m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.00

inxi Results

System:    Host: pogoplug-pi Kernel: 5.4.40-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
Memory:    RAM: total: 976.4 MiB used: 93.4 MiB (9.6%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 4 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: NetSarang Computer, Inc. X.org 11.0 driver: N/A note: display driver n/a 
           display ID: 192.168.X.X:0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1040 s-dpi: 96 s-size: 508x275mm (20.0x10.8") s-diag: 578mm (22.7") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:6 
           chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::6aae:f09f:470b:50a6/64 scope: link 
           IF-ID-1: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 162.202.X.X 
Drives:    Local Storage: total: 33.45 GiB used: 5.08 GiB (15.2%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Generic model: N/A size: 3.72 GiB block size: physical: 512 B logical: 512 B 
           Mass-Storage rev: 1.11 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.98 GiB (98.35%) used: 2.66 GiB (9.2%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (20.9%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /opt raw size: 3.46 GiB size: 3.35 GiB (96.63%) used: 2.37 GiB (70.8%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: 4gbpart uuid: 8fdde457-2cbc-4ce2-be97-8c6f984e69d4 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: CD28-6C97 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:5 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 
           Device-1: 1-1.1:6 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 
           Device-2: 1-1.4:7 info: GEMBIRD type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1908:0226 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.2% command: [kworker/0:1h-mmc_complete] pid: 2359 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.5% command: [kworker/0:13-events] pid: 3799 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.5% command: [kworker/0:65-events_freezable_power_] pid: 3851 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.4% command: zsh pid: 3967 mem: 4.34 MiB (0.4%) 
           5: cpu: 0.3% command: init pid: 1 mem: 8.25 MiB (0.8%) 
           Memory top: 5 
           1: mem: 16.0 MiB (1.6%) command: smbd pid: 606 cpu: 0.0% 
           2: mem: 12.0 MiB (1.2%) command: xterm pid: 1455 cpu: 0.0% 
           3: mem: 8.25 MiB (0.8%) command: init pid: 1 cpu: 0.3% 
           4: mem: 7.08 MiB (0.7%) command: systemd pid: 1435 cpu: 0.0% 
           5: mem: 6.67 MiB (0.6%) command: systemd-journald pid: 133 cpu: 0.0% 
Info:      Processes: 304 Uptime: 1h 10m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 
           alt: 8 Shell: Storage.sh (sudo) running in: Storage.sh inxi: 3.1.00

Benchmark #24446 - Brand: SanDisk SD Ultra (SL32G)