Benchmark #24462 - pibenchmarks.com

Brand: AData SP600
SSD (M.2 SATA)
#639 / 1,672
10
#835 / 1,672
#800 / 983
#95 / 115
5,098
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-15 21:54:39
#24,462
5,982
+884 (+14.78%)
Anonymous
Adata SP600 SSD on Pi 4b using Orico Type C

Storage Details
AData SP600
SSD (M.2 SATA)
64G
SSD
AData
SP600
2.5 inch
SATA
3.10
5,000
1d6b:0715
0x1d6b (Linux Foundation)
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
60.5 MB/s
282.86 MB/s
267.94 MB/s
8,037 IOPS
21,717 IOPS
32,150 KB/s
86,871 KB/s
17,295 KB/s
23,188 KB/s
14,993 KB/s
26,913 KB/s

inxi Results
System: Kernel: 4.19.58-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait plymouth.enable=0 Console: tty 4 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 444.5 MiB (11.2%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 151x56 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.58-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 74.13 GiB used: 3.62 GiB (4.9%) ID-1: /dev/mmcblk0 model: SD16G size: 14.51 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: A-Data model: SP 600 size: 59.63 GiB block size: physical: 512 B logical: 512 B rev: 1.2 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.37 GiB size: 58.39 GiB (98.35%) used: 3.59 GiB (6.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: incred2020 uuid: b464e0d3-c810-4251-9beb-4aab883c02aa ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.9 MiB (15.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 4217-3EC7 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 256.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 14.25 GiB fs: ext4 label: incred2020 uuid: b464e0d3-c810-4251-9beb-4aab883c02aa ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 4217-3EC7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: SiGma Micro Keyboard TRACER Gamma Ivory type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1c4f:0002 Device-2: 1-1.4:4 info: Belkin MI-2150 Trust Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 1241:1166 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0715 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_11.x buster main 2: deb-src https: //deb.nodesource.com/node_11.x buster main Active apt repos in: /etc/apt/sources.list.d/php.list 1: deb https: //packages.sury.org/php/ buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.9% command: init pid: 1 mem: 8.04 MiB (0.2%) 2: cpu: 1.5% command: asterisk pid: 1246 mem: 50.4 MiB (1.2%) 3: cpu: 0.9% command: index.js started by: node pid: 1580 mem: 41.1 MiB (1.0%) 4: cpu: 0.7% command: bundle.js started by: node pid: 1431 mem: 42.7 MiB (1.0%) 5: cpu: 0.6% command: fail2ban-server started by: python3 pid: 534 mem: 15.0 MiB (0.3%) Memory top: 5 1: mem: 82.3 MiB (2.1%) command: mysqld pid: 697 cpu: 0.3% 2: mem: 50.4 MiB (1.2%) command: asterisk pid: 1246 cpu: 1.5% 3: mem: 42.7 MiB (1.0%) command: bundle.js started by: node pid: 1431 cpu: 0.7% 4: mem: 41.1 MiB (1.0%) command: index.js started by: node pid: 1580 cpu: 0.9% 5: mem: 36.2 MiB (0.9%) command: pm2 pid: 1355 cpu: 0.6% Info: Processes: 152 Uptime: 5m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.58-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait plymouth.enable=0 
           Console: tty 4 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 444.5 MiB (11.2%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 151x56 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.58-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 74.13 GiB used: 3.62 GiB (4.9%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.51 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: A-Data model: SP 600 size: 59.63 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.2 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.37 GiB size: 58.39 GiB (98.35%) used: 3.59 GiB (6.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: incred2020 
           uuid: b464e0d3-c810-4251-9beb-4aab883c02aa 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.9 MiB (15.8%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 4217-3EC7 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 256.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.25 GiB fs: ext4 label: incred2020 
           uuid: b464e0d3-c810-4251-9beb-4aab883c02aa 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 4217-3EC7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: SiGma Micro Keyboard TRACER Gamma Ivory type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1c4f:0002 
           Device-2: 1-1.4:4 info: Belkin MI-2150 Trust Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 1241:1166 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 2109:0715 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_11.x buster main
           2: deb-src https: //deb.nodesource.com/node_11.x buster main
           Active apt repos in: /etc/apt/sources.list.d/php.list 
           1: deb https: //packages.sury.org/php/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.9% command: init pid: 1 mem: 8.04 MiB (0.2%) 
           2: cpu: 1.5% command: asterisk pid: 1246 mem: 50.4 MiB (1.2%) 
           3: cpu: 0.9% command: index.js started by: node pid: 1580 mem: 41.1 MiB (1.0%) 
           4: cpu: 0.7% command: bundle.js started by: node pid: 1431 mem: 42.7 MiB (1.0%) 
           5: cpu: 0.6% command: fail2ban-server started by: python3 pid: 534 mem: 15.0 MiB (0.3%) 
           Memory top: 5 
           1: mem: 82.3 MiB (2.1%) command: mysqld pid: 697 cpu: 0.3% 
           2: mem: 50.4 MiB (1.2%) command: asterisk pid: 1246 cpu: 1.5% 
           3: mem: 42.7 MiB (1.0%) command: bundle.js started by: node pid: 1431 cpu: 0.7% 
           4: mem: 41.1 MiB (1.0%) command: index.js started by: node pid: 1580 cpu: 0.9% 
           5: mem: 36.2 MiB (0.9%) command: pm2 pid: 1355 cpu: 0.6% 
Info:      Processes: 152 Uptime: 5m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24462 - Brand: AData SP600