Benchmark #24485 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,700
691
#956 / 1,700
#6 / 94
#9 / 89
3,996
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-16 05:33:16
#24,485
5,158
+1,162 (+22.53%)
tdmf40
Samsung 840 using Inateck SATA to USB3 adapter

Storage Details
Generic USB Disk
USB Flash
USB Flash
Generic
GenericFlashDisk
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
82.8 MB/s
3,700 IOPS
3,670 IOPS
14,800 KB/s
14,681 KB/s
22,675 KB/s
13,929 KB/s
24,009 KB/s
24,756 KB/s

inxi Results
System: Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=3 datadev=UUID=c36a636b-fb91-425e-bcf9-59fabe017c12 qmap=de ipv4=192.168.X.X/255.255.X.X/192.168.X.X Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 340.9 MiB (8.8%) gpu: 160.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 153x87 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75v64 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 262.38 GiB used: 67.2 MiB (0.0%) ID-1: /dev/mmcblk0 model: USD size: 29.50 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: USB3.0 Generic USB Device drive model: SSD 840 EVO 250GB family: based SSDs size: 232.89 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 8105 drive rev: EXT0BB6Q temp: 25 C scheme: MBR SMART: yes state: enabled health: PASSED on: 203d 10h cycles: 4042 written: 6.32 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: /boot raw size: 127.0 MiB size: 126.7 MiB (99.79%) used: 67.2 MiB (53.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 07F6-7983 Swap: Alert: No Swap data was found. Unmounted: ID-1: /dev/mmcblk0p2 size: 29.37 GiB fs: N/A label: N/A uuid: N/A ID-2: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A ID-3: /dev/sda2 size: 232.76 GiB fs: ext4 label: berryboot uuid: c36a636b-fb91-425e-bcf9-59fabe017c12 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:2590 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x buster main 2: deb-src https: //deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.6% command: lib/systemd/systemd pid: 1 mem: 8.12 MiB (0.2%) 2: cpu: 0.3% command: [jbd2/sda2-8] pid: 111 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: [kworker/u8:1-events_unbound] pid: 43 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: dbus-daemon pid: 318 mem: 2.93 MiB (0.0%) 5: cpu: 0.1% command: [rcu_preempt] pid: 10 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 8.12 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 2.6% 2: mem: 6.87 MiB (0.1%) command: systemd-journald pid: 204 cpu: 0.1% 3: mem: 6.54 MiB (0.1%) command: systemd pid: 947 cpu: 0.0% 4: mem: 6.07 MiB (0.1%) command: sshd: pid: 939 cpu: 0.0% 5: mem: 5.74 MiB (0.1%) command: systemd-logind pid: 333 cpu: 0.1% Info: Processes: 129 Uptime: 5m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.75v64 aarch64 bits: 32 compiler: gcc v: 7.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 elevator=deadline quiet bootmenutimeout=3 
           datadev=UUID=c36a636b-fb91-425e-bcf9-59fabe017c12 qmap=de 
           ipv4=192.168.X.X/255.255.X.X/192.168.X.X 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 340.9 MiB (8.8%) gpu: 160.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 153x87 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75v64 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 262.38 GiB used: 67.2 MiB (0.0%) 
           ID-1: /dev/mmcblk0 model: USD size: 29.50 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: USB3.0 Generic USB Device 
           drive model: SSD 840 EVO 250GB family: based SSDs size: 232.89 GiB block size: 
           physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 8105 drive rev: EXT0BB6Q temp: 25 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 203d 10h cycles: 4042 written: 6.32 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: /boot raw size: 127.0 MiB size: 126.7 MiB (99.79%) used: 67.2 MiB (53.0%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 07F6-7983 
Swap:      Alert: No Swap data was found. 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.37 GiB fs: N/A label: N/A uuid: N/A 
           ID-2: /dev/sda1 size: 127.0 MiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/sda2 size: 232.76 GiB fs: ext4 label: berryboot 
           uuid: c36a636b-fb91-425e-bcf9-59fabe017c12 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:2590 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x buster main
           2: deb-src https: //deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.6% command: lib/systemd/systemd pid: 1 mem: 8.12 MiB (0.2%) 
           2: cpu: 0.3% command: [jbd2/sda2-8] pid: 111 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.2% command: [kworker/u8:1-events_unbound] pid: 43 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: dbus-daemon pid: 318 mem: 2.93 MiB (0.0%) 
           5: cpu: 0.1% command: [rcu_preempt] pid: 10 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 8.12 MiB (0.2%) command: lib/systemd/systemd pid: 1 cpu: 2.6% 
           2: mem: 6.87 MiB (0.1%) command: systemd-journald pid: 204 cpu: 0.1% 
           3: mem: 6.54 MiB (0.1%) command: systemd pid: 947 cpu: 0.0% 
           4: mem: 6.07 MiB (0.1%) command: sshd: pid: 939 cpu: 0.0% 
           5: mem: 5.74 MiB (0.1%) command: systemd-logind pid: 333 cpu: 0.1% 
Info:      Processes: 129 Uptime: 5m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24485 - Brand: Generic USB Disk