Benchmark #24517 - pibenchmarks.com

Brand: SanDisk SD Extreme A1 (SC128)
A1 C10 U1
#77 / 1,679
253
#1,246 / 1,679
#133 / 394
1,342
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-16 11:02:47
#24,517
865
-477 (-55.14%)
Anonymous
pi3b with SD Card

Secure Digital (SD) Card Details
SanDisk SD Extreme A1 (SC128)
A1 C10 U1
41.4G
SD
SanDisk
SC128
SDXC
5.00
0x03
SD
8.0
03/2019
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
14.7 MB/s
19.99 MB/s
21.37 MB/s
610 IOPS
2,442 KB/s
7,844 KB/s
2,109 KB/s
7,318 KB/s
2,684 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait splash plymouth.ignore-serial-consoles quiet Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 772.1 MiB (77.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: default res: 1920x1080 OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 direct render: Yes Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link IF-ID-1: br-10d14e9054eb state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-246bbe88e099 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: br-89403df6e8fb state: down mac: IP v4: scope: global broadcast: IF-ID-4: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-5: veth765bb74 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth9437077 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vetha0c200f state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethde0cfd7 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethdeb0e92 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Drives: Local Storage: total: 119.08 GiB used: 20.97 GiB (17.6%) ID-1: /dev/mmcblk0 model: SC128 size: 119.08 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 41.41 GiB size: 40.64 GiB (98.13%) used: 10.12 GiB (24.9%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: bf5e965a-e3a6-4ddf-ac66-a933e302a9aa ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 33.8 MiB (49.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: AEED-9689 ID-3: /media/pi/Storage raw size: 37.41 GiB size: 36.70 GiB (98.10%) used: 221.5 MiB (0.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p9 label: Storage uuid: 7fec475c-055f-4475-b03d-c26fe9c03309 ID-4: /media/pi/Storage0 raw size: 37.42 GiB size: 36.70 GiB (98.10%) used: 47.9 MiB (0.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p11 label: Storage0 uuid: 6f12f35a-1f49-411a-b5ff-2742251af76c ID-5: /media/pi/System raw size: 512.0 MiB size: 511.7 MiB (99.95%) used: 138.6 MiB (27.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p8 label: System uuid: D3E4-4D8E ID-6: /media/pi/System0 raw size: 512.0 MiB size: 511.7 MiB (99.95%) used: 297.2 MiB (58.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p10 label: System0 uuid: D6F5-3AD4 ID-7: /var/lib/docker/overlay2/083b209b77d936ba6fa39099a3f9711c2d0dcd1e02d87e39871e92c6a675a162/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/4a9a09f30a386a84989d5f4959a6ea023491b28e4b89dd69455e3ec207789b07/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/55668bd9df4436740f196d6d066665569a7e5746299b77c590abdeeefcdaa6c9/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/6cf4fff5346ee1465da94e4474ce7123b9616dcc2b7b1daf44d52bb36b6b1c0e/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/703737a9fb2bd05aa6583b798ef456ed3ff454e32ebefbfbf84eb120f582a440/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-12: /var/lib/docker/overlay2/cb29329501761e1f7805f9cfc3909ef747e838cb3a128a0093795353709b0388/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 100.0 MiB (100.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 1.73 GiB fs: vfat label: RECOVERY uuid: 1E13-0F5E ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 64bc0ee5-a5c5-4a4b-9d66-8f283fd9ff41 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Hub: 1-1.1.2:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Device-2: 1-1.1.X.X:6 info: Realtek RTL2838 DVB-T type: driver: usbfs interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 0bda:2838 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Active apt repos in: /etc/apt/sources.list.d/yarn.list 1: deb https: //dl.yarnpkg.com/debian/ stable main Processes: CPU top: 5 1: cpu: 12.0% command: influxd pid: 1986 mem: 63.5 MiB (6.8%) 2: cpu: 10.0% command: containerd pid: 5268 mem: 20.0 MiB (2.1%) 3: cpu: 5.2% command: rtl_433 pid: 4370 mem: 6.02 MiB (0.6%) 4: cpu: 4.6% command: python3 pid: 22663 mem: 229.5 MiB (24.7%) 5: cpu: 3.0% command: [kswapd0] pid: 46 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 229.5 MiB (24.7%) command: python3 pid: 22663 cpu: 4.6% 2: mem: 63.5 MiB (6.8%) command: influxd pid: 1986 cpu: 12.0% 3: mem: 37.5 MiB (4.0%) command: xorg pid: 632 cpu: 0.7% 4: mem: 27.8 MiB (2.9%) command: lxpanel pid: 921 cpu: 0.2% 5: mem: 25.9 MiB (2.7%) command: vncserver-x11-core pid: 379 cpu: 0.0% Info: Processes: 198 Uptime: 5d 17h 50m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait splash plymouth.ignore-serial-consoles quiet 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 772.1 MiB (77.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") 
           s-diag: 583mm (23") 
           Monitor-1: default res: 1920x1080 
           OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           IF-ID-1: br-10d14e9054eb state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: br-246bbe88e099 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: br-89403df6e8fb state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-4: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-5: veth765bb74 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth9437077 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vetha0c200f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethde0cfd7 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethdeb0e92 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Drives:    Local Storage: total: 119.08 GiB used: 20.97 GiB (17.6%) 
           ID-1: /dev/mmcblk0 model: SC128 size: 119.08 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 41.41 GiB size: 40.64 GiB (98.13%) used: 10.12 GiB (24.9%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: bf5e965a-e3a6-4ddf-ac66-a933e302a9aa 
           ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 33.8 MiB (49.8%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: AEED-9689 
           ID-3: /media/pi/Storage raw size: 37.41 GiB size: 36.70 GiB (98.10%) 
           used: 221.5 MiB (0.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p9 label: Storage 
           uuid: 7fec475c-055f-4475-b03d-c26fe9c03309 
           ID-4: /media/pi/Storage0 raw size: 37.42 GiB size: 36.70 GiB (98.10%) 
           used: 47.9 MiB (0.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p11 label: Storage0 
           uuid: 6f12f35a-1f49-411a-b5ff-2742251af76c 
           ID-5: /media/pi/System raw size: 512.0 MiB size: 511.7 MiB (99.95%) 
           used: 138.6 MiB (27.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p8 label: System 
           uuid: D3E4-4D8E 
           ID-6: /media/pi/System0 raw size: 512.0 MiB size: 511.7 MiB (99.95%) 
           used: 297.2 MiB (58.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p10 label: System0 
           uuid: D6F5-3AD4 
           ID-7: /var/lib/docker/overlay2/083b209b77d936ba6fa39099a3f9711c2d0dcd1e02d87e39871e92c6a675a162/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/4a9a09f30a386a84989d5f4959a6ea023491b28e4b89dd69455e3ec207789b07/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/55668bd9df4436740f196d6d066665569a7e5746299b77c590abdeeefcdaa6c9/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/6cf4fff5346ee1465da94e4474ce7123b9616dcc2b7b1daf44d52bb36b6b1c0e/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/703737a9fb2bd05aa6583b798ef456ed3ff454e32ebefbfbf84eb120f582a440/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-12: /var/lib/docker/overlay2/cb29329501761e1f7805f9cfc3909ef747e838cb3a128a0093795353709b0388/merged raw size: N/A size: 40.64 GiB used: 10.12 GiB (24.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 100.0 MiB (100.0%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 1.73 GiB fs: vfat label: RECOVERY uuid: 1E13-0F5E 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 64bc0ee5-a5c5-4a4b-9d66-8f283fd9ff41 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Hub: 1-1.1.2:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Device-2: 1-1.1.X.X:6 info: Realtek RTL2838 DVB-T type:  driver: usbfs 
           interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 0bda:2838 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
           Active apt repos in: /etc/apt/sources.list.d/yarn.list 
           1: deb https: //dl.yarnpkg.com/debian/ stable main
Processes: CPU top: 5 
           1: cpu: 12.0% command: influxd pid: 1986 mem: 63.5 MiB (6.8%) 
           2: cpu: 10.0% command: containerd pid: 5268 mem: 20.0 MiB (2.1%) 
           3: cpu: 5.2% command: rtl_433 pid: 4370 mem: 6.02 MiB (0.6%) 
           4: cpu: 4.6% command: python3 pid: 22663 mem: 229.5 MiB (24.7%) 
           5: cpu: 3.0% command: [kswapd0] pid: 46 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 229.5 MiB (24.7%) command: python3 pid: 22663 cpu: 4.6% 
           2: mem: 63.5 MiB (6.8%) command: influxd pid: 1986 cpu: 12.0% 
           3: mem: 37.5 MiB (4.0%) command: xorg pid: 632 cpu: 0.7% 
           4: mem: 27.8 MiB (2.9%) command: lxpanel pid: 921 cpu: 0.2% 
           5: mem: 25.9 MiB (2.7%) command: vncserver-x11-core pid: 379 cpu: 0.0% 
Info:      Processes: 198 Uptime: 5d 17h 50m Init: systemd v: 241 runlevel: 5 Compilers: 
           gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24517 - Brand: SanDisk SD Extreme A1 (SC128)