Benchmark #24544 - pibenchmarks.com

Brand: Sabrent M.2 NVMe Enclosure
SSD (M.2 NVMe)
#129 / 1,672
120
#235 / 1,672
#233 / 983
#216 / 280
16,163
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-16 12:23:13
#24,544
7,129
-9,034 (-126.72%)
ssd

Storage Details
Sabrent M.2 NVMe Enclosure
SSD (M.2 NVMe)
119G
SSD
Sabrent
SABRENTExternal
3.10
5,000
05e3:0583
0x05e3
0x0583 (Digital Camera)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
155 MB/s
297.07 MB/s
291.11 MB/s
11,962 IOPS
15,645 IOPS
47,850 KB/s
62,582 KB/s
24,477 KB/s
23,251 KB/s
20,076 KB/s
24,398 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1280x720M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 367.2 MiB (9.2%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: N/A note: display driver n/a tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: N/A type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-1.4:5 chip ID: 1b17:0508 Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 176.97 GiB used: 2.49 GiB (1.4%) ID-1: /dev/mmcblk0 model: SA64G size: 57.73 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Sabrent model: External size: 119.24 GiB block size: physical: 4096 B logical: 512 B rev: 0204 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 117.12 GiB (98.43%) used: 2.44 GiB (2.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 57.47 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.3:4 info: N/A type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 2c99:0002 Device-2: 1-1.4:5 info: N/A type: Video,Audio driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1b17:0508 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 2-2:2 info: Genesys Logic ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 05e3:0626 Device-3: 2-2.4:3 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.0% command: octoprint started by: python2 pid: 1688 mem: 71.2 MiB (1.8%) 2: cpu: 0.2% command: bash pid: 5161 mem: 2.65 MiB (0.0%) 3: cpu: 0.1% command: sshd: pid: 3969 mem: 3.40 MiB (0.0%) 4: cpu: 0.1% command: -bash pid: 3972 mem: 3.89 MiB (0.1%) 5: cpu: 0.1% command: sudo pid: 5152 mem: 3.08 MiB (0.0%) Memory top: 5 1: mem: 71.2 MiB (1.8%) command: octoprint started by: python2 pid: 1688 cpu: 3.0% 2: mem: 10.5 MiB (0.2%) command: haproxy pid: 634 cpu: 0.0% 3: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 0.0% 4: mem: 8.00 MiB (0.2%) command: haproxy pid: 636 cpu: 0.0% 5: mem: 7.30 MiB (0.1%) command: systemd-journald pid: 100 cpu: 0.0% Info: Processes: 129 Uptime: 3h 58m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 4.9/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1280x720M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 367.2 MiB (9.2%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: N/A note: display driver n/a tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: N/A type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-1.4:5 
           chip ID: 1b17:0508 Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 176.97 GiB used: 2.49 GiB (1.4%) 
           ID-1: /dev/mmcblk0 model: SA64G size: 57.73 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Sabrent model: External size: 119.24 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0204 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 117.12 GiB (98.43%) used: 2.44 GiB (2.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 57.47 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.3:4 info: N/A type: Abstract (modem),CDC-Data driver: cdc_acm 
           interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 2c99:0002 Device-2: 1-1.4:5 info: N/A type: Video,Audio driver: snd-usb-audio,uvcvideo 
           interfaces: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1b17:0508 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 2-2:2 info: Genesys Logic ports: 4 rev: 3.1 speed: 5 Gb/s chip ID: 05e3:0626 
           Device-3: 2-2.4:3 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0583 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.0% command: octoprint started by: python2 pid: 1688 mem: 71.2 MiB (1.8%) 
           2: cpu: 0.2% command: bash pid: 5161 mem: 2.65 MiB (0.0%) 
           3: cpu: 0.1% command: sshd: pid: 3969 mem: 3.40 MiB (0.0%) 
           4: cpu: 0.1% command: -bash pid: 3972 mem: 3.89 MiB (0.1%) 
           5: cpu: 0.1% command: sudo pid: 5152 mem: 3.08 MiB (0.0%) 
           Memory top: 5 
           1: mem: 71.2 MiB (1.8%) command: octoprint started by: python2 pid: 1688 cpu: 3.0% 
           2: mem: 10.5 MiB (0.2%) command: haproxy pid: 634 cpu: 0.0% 
           3: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 0.0% 
           4: mem: 8.00 MiB (0.2%) command: haproxy pid: 636 cpu: 0.0% 
           5: mem: 7.30 MiB (0.1%) command: systemd-journald pid: 100 cpu: 0.0% 
Info:      Processes: 129 Uptime: 3h 58m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 4.9/8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.00

Benchmark #24544 - Brand: Sabrent M.2 NVMe Enclosure