Benchmark #24693 - pibenchmarks.com

Brand: Toshiba TransMemory
USB Flash
#555 / 1,679
15
#1,485 / 1,679
#64 / 94
#59 / 89
794
	Amazon.com Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it

Overview
2020-05-17 13:11:38
#24,693
409
-385 (-94.13%)
Anonymous
sd plus usb stick 16gb rasp 3bplus

Storage Details
Toshiba TransMemory
USB Flash
28.6G
USB Flash
Toshiba
TransMemory
2.00
480
0930:6544
0x0930 (Toshiba Corp.)
0x6544
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
250 (-150)
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
3.8 MB/s
27.97 MB/s
27.6 MB/s
22 IOPS
1,263 IOPS
89 KB/s
5,053 KB/s
7,221 KB/s
3,000 KB/s
5,018 KB/s
236 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=0b932db2-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 301.7 MiB (30.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 107x14 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 57.74 GiB used: 3.19 GiB (5.5%) ID-1: /dev/sda type: USB vendor: Toshiba model: TransMemory size: 28.87 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-2: /dev/sdb type: USB vendor: Toshiba model: TransMemory size: 28.87 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.62 GiB size: 28.04 GiB (97.99%) used: 3.14 GiB (11.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: cvenwwbackup uuid: 487e49f9-0216-4143-bbf9-7d619e0d4f21 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 1F25-1501 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 6341-C9E5 ID-2: /dev/sdb2 size: 28.62 GiB fs: ext4 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.2:4 info: Toshiba TransMemory-Mini / Kingston DataTraveler 2.0 Stick type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0930:6544 Device-3: 1-1.3:5 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Device-4: 1-1.4:6 info: Toshiba TransMemory-Mini / Kingston DataTraveler 2.0 Stick type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0930:6544 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 5.3% command: [kworker/2:6-events] pid: 8221 mem: 0.00 MiB (0.0%) 2: cpu: 4.6% command: [kworker/2:3-events] pid: 6365 mem: 0.00 MiB (0.0%) 3: cpu: 4.5% command: [kworker/2:0-events_freezable] pid: 2562 mem: 0.00 MiB (0.0%) 4: cpu: 1.3% command: domoticz pid: 1340 mem: 35.4 MiB (3.8%) 5: cpu: 0.8% command: [w1_bus_master1] pid: 165 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 35.4 MiB (3.8%) command: domoticz pid: 1340 cpu: 1.3% 2: mem: 12.7 MiB (1.3%) command: packagekitd pid: 8948 cpu: 0.1% 3: mem: 11.1 MiB (1.2%) command: systemd-journald pid: 110 cpu: 0.0% 4: mem: 10.3 MiB (1.1%) command: vncserver-x11-core pid: 436 cpu: 0.0% 5: mem: 8.00 MiB (0.8%) command: init pid: 1 cpu: 0.0% Info: Processes: 138 Uptime: 11d 1h 44m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=720 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=0b932db2-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.1 MiB used: 301.7 MiB (30.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 107x14 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 57.74 GiB used: 3.19 GiB (5.5%) 
           ID-1: /dev/sda type: USB vendor: Toshiba model: TransMemory size: 28.87 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-2: /dev/sdb type: USB vendor: Toshiba model: TransMemory size: 28.87 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.62 GiB size: 28.04 GiB (97.99%) used: 3.14 GiB (11.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: cvenwwbackup 
           uuid: 487e49f9-0216-4143-bbf9-7d619e0d4f21 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 1F25-1501 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sdb1 size: 256.0 MiB fs: vfat label: boot uuid: 6341-C9E5 
           ID-2: /dev/sdb2 size: 28.62 GiB fs: ext4 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.2:4 info: Toshiba TransMemory-Mini / Kingston DataTraveler 2.0 Stick 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0930:6544 Device-3: 1-1.3:5 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
           Device-4: 1-1.4:6 info: Toshiba TransMemory-Mini / Kingston DataTraveler 2.0 Stick 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0930:6544 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 5.3% command: [kworker/2:6-events] pid: 8221 mem: 0.00 MiB (0.0%) 
           2: cpu: 4.6% command: [kworker/2:3-events] pid: 6365 mem: 0.00 MiB (0.0%) 
           3: cpu: 4.5% command: [kworker/2:0-events_freezable] pid: 2562 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.3% command: domoticz pid: 1340 mem: 35.4 MiB (3.8%) 
           5: cpu: 0.8% command: [w1_bus_master1] pid: 165 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 35.4 MiB (3.8%) command: domoticz pid: 1340 cpu: 1.3% 
           2: mem: 12.7 MiB (1.3%) command: packagekitd pid: 8948 cpu: 0.1% 
           3: mem: 11.1 MiB (1.2%) command: systemd-journald pid: 110 cpu: 0.0% 
           4: mem: 10.3 MiB (1.1%) command: vncserver-x11-core pid: 436 cpu: 0.0% 
           5: mem: 8.00 MiB (0.8%) command: init pid: 1 cpu: 0.0% 
Info:      Processes: 138 Uptime: 11d 1h 44m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.00

Benchmark #24693 - Brand: Toshiba TransMemory