Benchmark #24703 - pibenchmarks.com

Brand: KingSpec MT Series
SSD (mSATA)
#301 / 1,679
46
#577 / 1,679
#556 / 984
#19 / 69
6,598
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-17 14:07:37
#24,703
5,319
-1,279 (-24.05%)
Anonymous
test

Storage Details
KingSpec MT Series
SSD (mSATA)
128G
SSD
KingSpec
MT-128
2.5 inch
SATA
3.00
5,000
174c:0857
0x174c (ASMedia Technology Inc.)
0x0857
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
192 MB/s
263.65 MB/s
242.46 MB/s
3,555 IOPS
18,269 IOPS
14,222 KB/s
73,077 KB/s
23,142 KB/s
27,983 KB/s
16,346 KB/s
11,023 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 257.2 MiB (6.5%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 148x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 133.88 GiB used: 4.02 GiB (3.0%) ID-1: /dev/mmcblk0 model: SA16G size: 14.64 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Micron model: MT-128 size: 119.24 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.21 GiB size: 116.84 GiB (98.01%) used: 3.96 GiB (3.4%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: oh_usb uuid: 967103ff-07e9-49ec-961e-585840e599ac ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-3: /opt/zram/zram1 raw size: 600.0 MiB size: 574.6 MiB (95.76%) used: 1.2 MiB (0.2%) fs: ext4 block size: 4096 B dev: /dev/zram1 label: N/A uuid: N/A ID-4: /opt/zram/zram2 raw size: 500.0 MiB size: 468.3 MiB (93.66%) used: 10.7 MiB (2.3%) fs: ext4 block size: 4096 B dev: /dev/zram2 label: N/A uuid: N/A ID-5: /var/lib/openhab2 raw size: N/A size: 574.6 MiB used: 1.2 MiB (0.2%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/log raw size: N/A size: 468.3 MiB used: 10.7 MiB (2.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 90 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap ID-2: swap-2 type: zram size: 600.0 MiB used: 0 KiB (0.0%) priority: 75 dev: /dev/zram0 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.38 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:0857 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/grafana.list 1: deb https: //packages.grafana.com/oss/deb stable main Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 8.0% command: [kworker/u8:4-events_unbound] pid: 8286 mem: 0.00 MiB (0.0%) 2: cpu: 2.0% command: ps pid: 8294 mem: 2.14 MiB (0.0%) 3: cpu: 1.6% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 1751 mem: 0.00 MiB (0.0%) 4: cpu: 1.3% command: htop pid: 2651 mem: 2.61 MiB (0.0%) 5: cpu: 1.1% command: [irq/37-mmc1] pid: 69 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 53.3 MiB (1.3%) command: node-red pid: 349 cpu: 1.1% 2: mem: 44.2 MiB (1.1%) command: frontail started by: node pid: 676 cpu: 0.4% 3: mem: 24.1 MiB (0.6%) command: influxd pid: 677 cpu: 0.1% 4: mem: 19.4 MiB (0.4%) command: meyectl started by: python pid: 330 cpu: 0.2% 5: mem: 15.8 MiB (0.4%) command: smbd pid: 774 cpu: 0.0% Info: Processes: 139 Uptime: 7m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 257.2 MiB (6.5%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 148x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 133.88 GiB used: 4.02 GiB (3.0%) 
           ID-1: /dev/mmcblk0 model: SA16G size: 14.64 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Micron model: MT-128 size: 119.24 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.21 GiB size: 116.84 GiB (98.01%) used: 3.96 GiB (3.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: oh_usb 
           uuid: 967103ff-07e9-49ec-961e-585840e599ac 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-3: /opt/zram/zram1 raw size: 600.0 MiB size: 574.6 MiB (95.76%) used: 1.2 MiB (0.2%) 
           fs: ext4 block size: 4096 B dev: /dev/zram1 label: N/A uuid: N/A 
           ID-4: /opt/zram/zram2 raw size: 500.0 MiB size: 468.3 MiB (93.66%) 
           used: 10.7 MiB (2.3%) fs: ext4 block size: 4096 B dev: /dev/zram2 label: N/A uuid: N/A 
           ID-5: /var/lib/openhab2 raw size: N/A size: 574.6 MiB used: 1.2 MiB (0.2%) fs: overlay 
           source: ERR-102 label: N/A uuid: N/A 
           ID-6: /var/log raw size: N/A size: 468.3 MiB used: 10.7 MiB (2.3%) fs: overlay 
           source: ERR-102 label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 90 (default 60) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
           ID-2: swap-2 type: zram size: 600.0 MiB used: 0 KiB (0.0%) priority: 75 dev: /dev/zram0 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.38 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 174c:0857 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/grafana.list 
           1: deb https: //packages.grafana.com/oss/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 8.0% command: [kworker/u8:4-events_unbound] pid: 8286 mem: 0.00 MiB (0.0%) 
           2: cpu: 2.0% command: ps pid: 8294 mem: 2.14 MiB (0.0%) 
           3: cpu: 1.6% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 1751 
           mem: 0.00 MiB (0.0%) 
           4: cpu: 1.3% command: htop pid: 2651 mem: 2.61 MiB (0.0%) 
           5: cpu: 1.1% command: [irq/37-mmc1] pid: 69 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 53.3 MiB (1.3%) command: node-red pid: 349 cpu: 1.1% 
           2: mem: 44.2 MiB (1.1%) command: frontail started by: node pid: 676 cpu: 0.4% 
           3: mem: 24.1 MiB (0.6%) command: influxd pid: 677 cpu: 0.1% 
           4: mem: 19.4 MiB (0.4%) command: meyectl started by: python pid: 330 cpu: 0.2% 
           5: mem: 15.8 MiB (0.4%) command: smbd pid: 774 cpu: 0.0% 
Info:      Processes: 139 Uptime: 7m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24703 - Brand: KingSpec MT Series