Benchmark #24720 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#60 / 1,700
319
#1,004 / 1,700
#918 / 989
#130 / 145
3,228
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-17 16:47:29
#24,720
3,038
-190 (-6.25%)
Anonymous

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
62G
SSD
SanDisk
pSSD
1.8 inch
SATA
3.00
5,000
1d6b:5580
0x1d6b (Linux Foundation)
0x5580 (SDCZ80 Flash Drive)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
75.6 MB/s
189.39 MB/s
175.06 MB/s
2,611 IOPS
2,698 IOPS
10,444 KB/s
10,793 KB/s
23,358 KB/s
21,766 KB/s
10,000 KB/s
10,498 KB/s

inxi Results
System: Host: pi4a.paulbarnett.org Kernel: 4.19.97-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1280x1024M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=3bc8a787-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles modules-load=dwc2,g_ether Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 507.4 MiB (13.1%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 171x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v8+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd52:a81c:df85:1:7ff7:1a06:db75:5f9a/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::26fd:b561:f462:654d/64 scope: link IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd52:a81c:df85:1:4fc1:e999:1d63:fade/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::4508:1042:313:3f8/64 scope: link WAN IP: 87.75.X.X Drives: Local Storage: total: 73.30 GiB used: 5.72 GiB (7.8%) ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme drive model: pSSD family: based SSDs size: 58.43 GiB block size: physical: 512 B logical: 512 B sata: 2.6 speed: 6.0 Gb/s drive rev: 0001 drive rev: 3 scheme: MBR SMART: yes state: enabled health: PASSED on: 40 hrs cycles: 221 read: 89.61 GiB written: 92.71 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 19.53 GiB size: 19.16 GiB (98.11%) used: 5.43 GiB (28.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed ID-2: /data raw size: 10.00 GiB size: 9.78 GiB (97.81%) used: 298.1 MiB (3.0%) fs: ext4 block size: 4096 B dev: /dev/dm-0 label: data uuid: 0284f458-6036-41ad-8f77-0d9babcf0a4f Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 3FFE-CDCA ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 3FFE-CDCA ID-3: /dev/sda3 size: 38.64 GiB fs: lvm2_member label: N/A uuid: nXQcXb-Rcy7-Ghu9-X0Dz-qFzZ-fdQ8-8Bmg4u USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5580 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.1% command: packagekitd pid: 4757 mem: 12.3 MiB (0.3%) 2: cpu: 0.0% command: init pid: 1 mem: 8.17 MiB (0.2%) 3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 4: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [rcu_par_gp] pid: 4 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 12.3 MiB (0.3%) command: packagekitd pid: 4757 cpu: 0.1% 2: mem: 8.17 MiB (0.2%) command: init pid: 1 cpu: 0.0% 3: mem: 8.05 MiB (0.2%) command: cups-browsed pid: 459 cpu: 0.0% 4: mem: 7.88 MiB (0.2%) command: systemd-journald pid: 116 cpu: 0.0% 5: mem: 7.30 MiB (0.1%) command: systemd pid: 1261 cpu: 0.0% Info: Processes: 136 Uptime: 1h 24m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 inxi: 3.1.00

inxi Results

System:    Host: pi4a.paulbarnett.org Kernel: 4.19.97-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1280x1024M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 
           console=ttyS0,115200 console=tty1 root=PARTUUID=3bc8a787-02 rootfstype=ext4 elevator=deadline fsck.repair=yes 
           rootwait quiet splash plymouth.ignore-serial-consoles modules-load=dwc2,g_ether 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.79 GiB used: 507.4 MiB (13.1%) gpu: 64.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 171x24 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v8+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fd52:a81c:df85:1:7ff7:1a06:db75:5f9a/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::26fd:b561:f462:654d/64 scope: link 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fd52:a81c:df85:1:4fc1:e999:1d63:fade/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::4508:1042:313:3f8/64 scope: link 
           WAN IP: 87.75.X.X 
Drives:    Local Storage: total: 73.30 GiB used: 5.72 GiB (7.8%) 
           ID-1: /dev/mmcblk0 model: USDU1 size: 14.87 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme drive model: pSSD family: based SSDs size: 58.43 GiB 
           block size: physical: 512 B logical: 512 B sata: 2.6 speed: 6.0 Gb/s 
           drive rev: 0001 drive rev: 3 scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 40 hrs cycles: 221 read: 89.61 GiB written: 92.71 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 19.53 GiB size: 19.16 GiB (98.11%) used: 5.43 GiB (28.3%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
           ID-2: /data raw size: 10.00 GiB size: 9.78 GiB (97.81%) used: 298.1 MiB (3.0%) fs: ext4 block size: 4096 B 
           dev: /dev/dm-0 label: data uuid: 0284f458-6036-41ad-8f77-0d9babcf0a4f 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 3FFE-CDCA 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 3FFE-CDCA 
           ID-3: /dev/sda3 size: 38.64 GiB fs: lvm2_member label: N/A uuid: nXQcXb-Rcy7-Ghu9-X0Dz-qFzZ-fdQ8-8Bmg4u 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 0781:5580 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.1% command: packagekitd pid: 4757 mem: 12.3 MiB (0.3%) 
           2: cpu: 0.0% command: init pid: 1 mem: 8.17 MiB (0.2%) 
           3: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.0% command: [rcu_gp] pid: 3 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [rcu_par_gp] pid: 4 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 12.3 MiB (0.3%) command: packagekitd pid: 4757 cpu: 0.1% 
           2: mem: 8.17 MiB (0.2%) command: init pid: 1 cpu: 0.0% 
           3: mem: 8.05 MiB (0.2%) command: cups-browsed pid: 459 cpu: 0.0% 
           4: mem: 7.88 MiB (0.2%) command: systemd-journald pid: 116 cpu: 0.0% 
           5: mem: 7.30 MiB (0.1%) command: systemd pid: 1261 cpu: 0.0% 
Info:      Processes: 136 Uptime: 1h 24m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 
           alt: 8 Shell: bash v: 5.0.3 inxi: 3.1.00

Benchmark #24720 - Brand: SanDisk Extreme Pro USB