Benchmark #24760 - pibenchmarks.com

Brand: Panasonic SD
A1 C10 U1
#80 / 1,539
133
#1,226 / 1,539
#206 / 369
1,075
	Amazon.com Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.it Amazon.nl

Overview
2020-05-18 10:37:50
#24,760
1,235
+160 (+12.96%)
mr9186
Pi 4 overclocked with sandisk microsd#

Secure Digital (SD) Card Details
Panasonic SD
A1 C10 U1
11.8G
SD
Panasonic
Y016U
SD
6.00
0x01
PA
1.3
01/2020
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,750 (+250)
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
31.5 MB/s
41.75 MB/s
40.86 MB/s
648 IOPS
2,814 IOPS
2,594 KB/s
11,257 KB/s
11,769 KB/s
2,535 KB/s
9,241 KB/s
2,279 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 406.3 MiB (10.2%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 864 Speed: 1200 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 120x50 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 1.83 TiB used: 2.02 GiB (0.1%) ID-1: /dev/mmcblk0 model: Y016U size: 14.45 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A2 drive model: WD10JMVW-11AJGS4 family: Elements / My Passport (USB, AF) size: 931.48 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s rotation: 5400 rpm rev: 1004 drive rev: 01.01A01 temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 13d 9h cycles: 893 ID-3: /dev/sdb type: USB vendor: Western Digital model: WD Elements 10B8 drive model: WD10JMVW-11AJGS2 family: Elements / My Passport (USB, AF) size: 931.48 GiB block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s rotation: 5400 rpm rev: 1012 drive rev: 01.01A01 temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 250d 20h cycles: 1189 Message: No Optical or Floppy data was found. RAID: Supported md-raid types: raid0 Device-1: md0 type: mdraid status: active Components: online: sdb1~c1 sda1~c0 Info: raid: raid-0 blocks: 1953191936 report: N/A chunk size: 512k super blocks: 1.2 Partition: ID-1: / raw size: 11.78 GiB size: 11.47 GiB (97.37%) used: 1.42 GiB (12.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: 4ab7e560-7be9-4cd9-86d5-8cc8eae44a97 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 0386-46E6 ID-3: /mnt/raid1 raw size: 1.82 TiB size: 1.79 TiB (98.38%) used: 554.8 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/md0 label: N/A uuid: 576e368d-cdc7-4de7-8b6a-9b1425d3c27d Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 5C7F-80DB ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 361b5d7b-6a04-419f-99bb-32b12e11b2ac USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: Western Digital Elements Portable (WDBU6Y WDBUZG) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 1058:10b8 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: Western Digital Elements 25A2 type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1058:25a2 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 10.7% command: smbd pid: 913 mem: 14.9 MiB (0.3%) 2: cpu: 0.9% command: smartd pid: 1300 mem: 3.48 MiB (0.0%) 3: cpu: 0.7% command: init pid: 1 mem: 8.13 MiB (0.2%) 4: cpu: 0.6% command: [usb-storage] pid: 103 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 16.2 MiB (0.4%) command: smbd pid: 852 cpu: 0.0% 2: mem: 14.9 MiB (0.3%) command: smbd pid: 913 cpu: 10.7% 3: mem: 8.96 MiB (0.2%) command: nmbd pid: 555 cpu: 0.0% 4: mem: 8.13 MiB (0.2%) command: init pid: 1 cpu: 0.7% 5: mem: 7.24 MiB (0.1%) command: systemd pid: 881 cpu: 0.0% Info: Processes: 146 Uptime: 9m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 406.3 MiB (10.2%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 864 
           Speed: 1200 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 120x50 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 1.83 TiB used: 2.02 GiB (0.1%) 
           ID-1: /dev/mmcblk0 model: Y016U size: 14.45 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A2 
           drive model: WD10JMVW-11AJGS4 family: Elements / My Passport (USB, AF) size: 931.48 GiB 
           block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s 
           rotation: 5400 rpm rev: 1004 
           drive rev: 01.01A01 temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 13d 9h cycles: 893 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD Elements 10B8 
           drive model: WD10JMVW-11AJGS2 family: Elements / My Passport (USB, AF) size: 931.48 GiB 
           block size: physical: 4096 B logical: 512 B sata: 3.0 speed: 3.0 Gb/s 
           rotation: 5400 rpm rev: 1012 
           drive rev: 01.01A01 temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 250d 20h cycles: 1189 
           Message: No Optical or Floppy data was found. 
RAID:      Supported md-raid types: raid0 
           Device-1: md0 type: mdraid status: active Components: online: sdb1~c1 sda1~c0 
           Info: raid: raid-0 blocks: 1953191936 report: N/A chunk size: 512k super blocks: 1.2 
Partition: ID-1: / raw size: 11.78 GiB size: 11.47 GiB (97.37%) used: 1.42 GiB (12.4%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: 4ab7e560-7be9-4cd9-86d5-8cc8eae44a97 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 0386-46E6 
           ID-3: /mnt/raid1 raw size: 1.82 TiB size: 1.79 TiB (98.38%) used: 554.8 MiB (0.0%) 
           fs: ext4 block size: 4096 B dev: /dev/md0 label: N/A 
           uuid: 576e368d-cdc7-4de7-8b6a-9b1425d3c27d 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 5C7F-80DB 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 361b5d7b-6a04-419f-99bb-32b12e11b2ac 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: Western Digital Elements Portable (WDBU6Y WDBUZG) 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 1058:10b8 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: Western Digital Elements 25A2 type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1058:25a2 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 10.7% command: smbd pid: 913 mem: 14.9 MiB (0.3%) 
           2: cpu: 0.9% command: smartd pid: 1300 mem: 3.48 MiB (0.0%) 
           3: cpu: 0.7% command: init pid: 1 mem: 8.13 MiB (0.2%) 
           4: cpu: 0.6% command: [usb-storage] pid: 103 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 16.2 MiB (0.4%) command: smbd pid: 852 cpu: 0.0% 
           2: mem: 14.9 MiB (0.3%) command: smbd pid: 913 cpu: 10.7% 
           3: mem: 8.96 MiB (0.2%) command: nmbd pid: 555 cpu: 0.0% 
           4: mem: 8.13 MiB (0.2%) command: init pid: 1 cpu: 0.7% 
           5: mem: 7.24 MiB (0.1%) command: systemd pid: 881 cpu: 0.0% 
Info:      Processes: 146 Uptime: 9m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24760 - Brand: Panasonic SD