Benchmark #24914 - pibenchmarks.com

Brand: KingSpec Z3 Portable Series
SSD (Portable)
#85 / 1,679
211
#431 / 1,679
#416 / 984
#57 / 144
7,496
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.sg

Overview
2020-05-20 03:26:50
#24,914
9,172
+1,676 (+18.27%)
jav
KingSpec External SSD hard drive 120GB on pi 4 USB 3.1

Storage Details
KingSpec Z3 Portable Series
SSD (Portable)
128G
SSD
KingSpec
Z3-128
2.5 inch
SATA
3.00
5,000
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
197 MB/s
328.04 MB/s
301.53 MB/s
12,226 IOPS
22,705 IOPS
48,907 KB/s
90,820 KB/s
32,402 KB/s
31,441 KB/s
23,247 KB/s
34,563 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_ADDRESS = "cs_CZ.UTF-8", LC_NAME = "cs_CZ.UTF-8", LC_MONETARY = "cs_CZ.UTF-8", LC_PAPER = "cs_CZ.UTF-8", LC_IDENTIFICATION = "cs_CZ.UTF-8", LC_TELEPHONE = "cs_CZ.UTF-8", LC_MEASUREMENT = "cs_CZ.UTF-8", LC_TIME = "cs_CZ.UTF-8", LC_NUMERIC = "cs_CZ.UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4398257d-06 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 198.0 MiB (9.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev,modesetting tty: 153x70 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 148.97 GiB used: 5.82 GiB (3.9%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: Z3-128 size: 119.24 GiB block size: physical: 4096 B logical: 512 B rev: 1214 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.14 GiB size: 117.15 GiB (98.32%) used: 5.77 GiB (4.9%) fs: ext4 block size: 4096 B dev: /dev/sda6 label: root uuid: 2106c047-3a17-4ca0-a874-c95104542650 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 275E-F23D Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 009B-F0D1 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 72786418-ba5d-4985-935d-955b77ecebbd ID-4: /dev/sda1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 22D8-74F0 ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 5fdcb0f9-8898-4fb2-a106-4219c9ff1e08 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Intrinsix type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0578:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.9% command: init pid: 1 mem: 8.00 MiB (0.4%) 2: cpu: 0.6% command: systemd-udevd pid: 141 mem: 3.81 MiB (0.1%) 3: cpu: 0.5% command: systemd-journald pid: 110 mem: 7.03 MiB (0.3%) 4: cpu: 0.5% command: dbus-daemon pid: 306 mem: 3.51 MiB (0.1%) 5: cpu: 0.5% command: -bash pid: 887 mem: 3.71 MiB (0.1%) Memory top: 5 1: mem: 12.8 MiB (0.6%) command: packagekitd pid: 858 cpu: 0.2% 2: mem: 10.8 MiB (0.5%) command: udisksd pid: 330 cpu: 0.3% 3: mem: 8.00 MiB (0.4%) command: init pid: 1 cpu: 4.9% 4: mem: 7.18 MiB (0.3%) command: systemd pid: 582 cpu: 0.1% 5: mem: 7.10 MiB (0.3%) command: polkitd pid: 497 cpu: 0.0% Info: Processes: 150 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_ADDRESS = "cs_CZ.UTF-8",
	LC_NAME = "cs_CZ.UTF-8",
	LC_MONETARY = "cs_CZ.UTF-8",
	LC_PAPER = "cs_CZ.UTF-8",
	LC_IDENTIFICATION = "cs_CZ.UTF-8",
	LC_TELEPHONE = "cs_CZ.UTF-8",
	LC_MEASUREMENT = "cs_CZ.UTF-8",
	LC_TIME = "cs_CZ.UTF-8",
	LC_NUMERIC = "cs_CZ.UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4398257d-06 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 198.0 MiB (9.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev,modesetting tty: 153x70 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 148.97 GiB used: 5.82 GiB (3.9%) 
           ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: Z3-128 size: 119.24 GiB block size: physical: 4096 B 
           logical: 512 B rev: 1214 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.14 GiB size: 117.15 GiB (98.32%) used: 5.77 GiB (4.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda6 label: root 
           uuid: 2106c047-3a17-4ca0-a874-c95104542650 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 275E-F23D 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 009B-F0D1 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 72786418-ba5d-4985-935d-955b77ecebbd 
           ID-4: /dev/sda1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 22D8-74F0 
           ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 5fdcb0f9-8898-4fb2-a106-4219c9ff1e08 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Intrinsix type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 0578:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.9% command: init pid: 1 mem: 8.00 MiB (0.4%) 
           2: cpu: 0.6% command: systemd-udevd pid: 141 mem: 3.81 MiB (0.1%) 
           3: cpu: 0.5% command: systemd-journald pid: 110 mem: 7.03 MiB (0.3%) 
           4: cpu: 0.5% command: dbus-daemon pid: 306 mem: 3.51 MiB (0.1%) 
           5: cpu: 0.5% command: -bash pid: 887 mem: 3.71 MiB (0.1%) 
           Memory top: 5 
           1: mem: 12.8 MiB (0.6%) command: packagekitd pid: 858 cpu: 0.2% 
           2: mem: 10.8 MiB (0.5%) command: udisksd pid: 330 cpu: 0.3% 
           3: mem: 8.00 MiB (0.4%) command: init pid: 1 cpu: 4.9% 
           4: mem: 7.18 MiB (0.3%) command: systemd pid: 582 cpu: 0.1% 
           5: mem: 7.10 MiB (0.3%) command: polkitd pid: 497 cpu: 0.0% 
Info:      Processes: 150 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24914 - Brand: KingSpec Z3 Portable Series