Benchmark #24921 - pibenchmarks.com

Brand: Toshiba SG6 M.2 Series
SSD (M.2 SATA)
#718 / 1,539
5
#403 / 1,539
#387 / 875
#51 / 112
6,775
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-20 06:22:28
#24,921
7,702
+927 (+12.04%)
Anonymous
mine

Storage Details
Toshiba SG6 M.2 Series
SSD (M.2 SATA)
512G
SSD
Toshiba
KSG60ZMV512GM.22280512GB
M.2
SATA
3.00
5,000
125f:a37a
0x125f (A-DATA Technology Co., Ltd.)
0xa37a
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
107 MB/s
281.8 MB/s
284.98 MB/s
12,104 IOPS
22,021 IOPS
48,416 KB/s
88,086 KB/s
29,577 KB/s
30,774 KB/s
19,311 KB/s
31,399 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=55556666-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 369.7 MiB (9.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") s-diag: 338mm (13.3") Monitor-1: HDMI-1 res: 1024x768 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Device-1: Ralink RT2870/RT3070 Wireless Adapter type: USB driver: rt2800usb bus ID: 1-1.3:3 chip ID: 148f:3070 IF: wlan1 state: down mac: IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 536.56 GiB used: 3.07 GiB (0.6%) ID-1: /dev/mmcblk0 model: FC8HT size: 59.62 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: USB3.1 JMS580 size: 476.94 GiB block size: physical: 4096 B logical: 512 B rev: 3103 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 476.69 GiB size: 3.16 GiB (0.66%) used: 2.97 GiB (94.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 68.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 59.37 GiB fs: ext4 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Ralink RT2870/RT3070 Wireless Adapter type: Network driver: rt2800usb interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 148f:3070 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: A-DATA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 125f:a37a Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.4% command: vncserver-x11-core pid: 523 mem: 21.1 MiB (0.5%) 2: cpu: 3.4% command: xorg pid: 580 mem: 50.9 MiB (1.3%) 3: cpu: 2.2% command: lxpanel pid: 758 mem: 28.2 MiB (0.7%) 4: cpu: 2.1% command: init pid: 1 mem: 8.11 MiB (0.2%) 5: cpu: 1.0% command: lxterminal pid: 1314 mem: 47.9 MiB (1.2%) Memory top: 5 1: mem: 50.9 MiB (1.3%) command: xorg pid: 580 cpu: 3.4% 2: mem: 47.9 MiB (1.2%) command: lxterminal pid: 1314 cpu: 1.0% 3: mem: 44.3 MiB (1.1%) command: dnsmasq pid: 1120 cpu: 0.6% 4: mem: 28.2 MiB (0.7%) command: lxpanel pid: 758 cpu: 2.2% 5: mem: 24.1 MiB (0.6%) command: pcmanfm pid: 759 cpu: 0.3% Info: Processes: 175 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=55556666-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 369.7 MiB (9.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") 
           s-diag: 338mm (13.3") 
           Monitor-1: HDMI-1 res: 1024x768 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Device-1: Ralink RT2870/RT3070 Wireless Adapter type: USB driver: rt2800usb 
           bus ID: 1-1.3:3 chip ID: 148f:3070 IF: wlan1 state: down mac:  
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 536.56 GiB used: 3.07 GiB (0.6%) 
           ID-1: /dev/mmcblk0 model: FC8HT size: 59.62 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: USB3.1 JMS580 size: 476.94 GiB block size: 
           physical: 4096 B logical: 512 B rev: 3103 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 476.69 GiB size: 3.16 GiB (0.66%) used: 2.97 GiB (94.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 6341-C9E5 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 6341-C9E5 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 68.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.37 GiB fs: ext4 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Ralink RT2870/RT3070 Wireless Adapter type: Network 
           driver: rt2800usb interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 148f:3070 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: A-DATA type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 125f:a37a Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.4% command: vncserver-x11-core pid: 523 mem: 21.1 MiB (0.5%) 
           2: cpu: 3.4% command: xorg pid: 580 mem: 50.9 MiB (1.3%) 
           3: cpu: 2.2% command: lxpanel pid: 758 mem: 28.2 MiB (0.7%) 
           4: cpu: 2.1% command: init pid: 1 mem: 8.11 MiB (0.2%) 
           5: cpu: 1.0% command: lxterminal pid: 1314 mem: 47.9 MiB (1.2%) 
           Memory top: 5 
           1: mem: 50.9 MiB (1.3%) command: xorg pid: 580 cpu: 3.4% 
           2: mem: 47.9 MiB (1.2%) command: lxterminal pid: 1314 cpu: 1.0% 
           3: mem: 44.3 MiB (1.1%) command: dnsmasq pid: 1120 cpu: 0.6% 
           4: mem: 28.2 MiB (0.7%) command: lxpanel pid: 758 cpu: 2.2% 
           5: mem: 24.1 MiB (0.6%) command: pcmanfm pid: 759 cpu: 0.3% 
Info:      Processes: 175 Uptime: 5m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24921 - Brand: Toshiba SG6 M.2 Series