Benchmark #24957 - pibenchmarks.com

Brand: SanDisk Ultra CZ48 USB
USB Flash
#52 / 1,675
322
#1,372 / 1,675
#33 / 93
#35 / 89
1,078
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-20 11:36:53
#24,957
1,494
+416 (+27.84%)
Anonymous

Storage Details
SanDisk Ultra CZ48 USB
USB Flash
114.3G
USB Flash
SanDisk
Ultra
3.00
5,000
1d6b:5581
0x1d6b (Linux Foundation)
0x5581
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
63.1 MB/s
104.22 MB/s
33.18 MB/s
551 IOPS
1,891 IOPS
2,205 KB/s
7,564 KB/s
17,544 KB/s
3,756 KB/s
7,066 KB/s
2,231 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1200 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: b03112 Memory: RAM: total: 1.96 GiB used: 184.7 MiB (9.2%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 148x35 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: eth0 state: down mac: IF-ID-3: wlan0 state: up mac: IP v4: scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 144.25 GiB used: 29.82 GiB (20.7%) ID-1: /dev/sda type: USB vendor: SanDisk model: Ultra size: 114.56 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-2: /dev/sdb type: USB vendor: Generic model: Flash Disk size: 29.69 GiB block size: physical: 512 B logical: 512 B rev: 8.07 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 114.31 GiB size: 112.51 GiB (98.43%) used: 16.13 GiB (14.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.6 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 ID-3: /mnt/87435382-5a06-4ff3-a0c6-52cb7a4a0cde raw size: 29.69 GiB size: 29.68 GiB (99.99%) used: 13.64 GiB (45.9%) fs: f2fs block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 87435382-5a06-4ff3-a0c6-52cb7a4a0cde Swap: Kernel: swappiness: 1 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: file size: 2.00 GiB used: 33.6 MiB (1.6%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Device-1: 1-1.3.1:4 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 058f:6387 Device-2: 1-1.3.3:5 info: HP type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 03f0:064a Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: SanDisk Ultra type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5581 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui Active apt repos in: /etc/apt/sources.list.d/webmin.list 1: deb https: //download.webmin.com/download/repository sarge contrib Processes: CPU top: 5 1: cpu: 0.6% command: [kswapd0] pid: 44 mem: 0.00 MiB (0.0%) 2: cpu: 0.5% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 3: cpu: 0.5% command: [kworker/u8:3-events_unbound] pid: 1136 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: [usb-storage] pid: 72 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: init pid: 1 mem: 5.09 MiB (0.2%) Memory top: 5 1: mem: 21.3 MiB (1.0%) command: dockerd pid: 597 cpu: 0.0% 2: mem: 12.7 MiB (0.6%) command: containerd pid: 431 cpu: 0.0% 3: mem: 9.75 MiB (0.4%) command: miniserv.pl started by: perl pid: 594 cpu: 0.0% 4: mem: 5.48 MiB (0.2%) command: systemd-journald pid: 101 cpu: 0.0% 5: mem: 5.09 MiB (0.2%) command: init pid: 1 cpu: 0.1% Info: Processes: 110 Uptime: 49m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1200 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: b03112 
           Memory:    RAM: total: 1.96 GiB used: 184.7 MiB (9.2%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 148x35 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: eth0 state: down mac:  
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 144.25 GiB used: 29.82 GiB (20.7%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: Ultra size: 114.56 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-2: /dev/sdb type: USB vendor: Generic model: Flash Disk size: 29.69 GiB block size: 
           physical: 512 B logical: 512 B rev: 8.07 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 114.31 GiB size: 112.51 GiB (98.43%) used: 16.13 GiB (14.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.6 MiB (20.9%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 
           ID-3: /mnt/87435382-5a06-4ff3-a0c6-52cb7a4a0cde raw size: 29.69 GiB 
           size: 29.68 GiB (99.99%) used: 13.64 GiB (45.9%) fs: f2fs block size: 4096 B 
           dev: /dev/sdb1 label: N/A uuid: 87435382-5a06-4ff3-a0c6-52cb7a4a0cde 
Swap:      Kernel: swappiness: 1 (default 60) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2.00 GiB used: 33.6 MiB (1.6%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Device-1: 1-1.3.1:4 info: Alcor Micro Flash Drive type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 058f:6387 
           Device-2: 1-1.3.3:5 info: HP type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 03f0:064a 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: SanDisk Ultra type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0781:5581 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
           Active apt repos in: /etc/apt/sources.list.d/webmin.list 
           1: deb https: //download.webmin.com/download/repository sarge contrib
Processes: CPU top: 5 
           1: cpu: 0.6% command: [kswapd0] pid: 44 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.5% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.5% command: [kworker/u8:3-events_unbound] pid: 1136 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.4% command: [usb-storage] pid: 72 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: init pid: 1 mem: 5.09 MiB (0.2%) 
           Memory top: 5 
           1: mem: 21.3 MiB (1.0%) command: dockerd pid: 597 cpu: 0.0% 
           2: mem: 12.7 MiB (0.6%) command: containerd pid: 431 cpu: 0.0% 
           3: mem: 9.75 MiB (0.4%) command: miniserv.pl started by: perl pid: 594 cpu: 0.0% 
           4: mem: 5.48 MiB (0.2%) command: systemd-journald pid: 101 cpu: 0.0% 
           5: mem: 5.09 MiB (0.2%) command: init pid: 1 cpu: 0.1% 
Info:      Processes: 110 Uptime: 49m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24957 - Brand: SanDisk Ultra CZ48 USB